画像は参考用です
LTC1485IS8
+BOMIC TRANSCEIVER HALF 1/1 8SOIC
-
メーカーリニアテクノロジー
-
メーカー品番 #LTC1485IS8
-
在庫状況5369
365 日間品質保証
7*24 日間の品質保証
90-時間単位のサービス保証
1日間のアフターサービス保証
仕様
| 属性 | 値 |
| Supplier | Rochester Electronics, LLC |
| Package | Bulk |
| ProductStatus | Active |
| Type | Transceiver |
| Protocol | RS422, RS485 |
| NumberofDrivers/Receivers | 1/1 |
| Duplex | Half |
| ReceiverHysteresis | 60 mV |
| Voltage-Supply | 4.75V ~ 5.25V |
| OperatingTemperature | -40°C ~ 85°C |
| MountingType | Surface Mount |
| Package/Case | 8-SOIC (0.154, 3.90mm Width) |
概要
Description
Introduction to LTC1485IS8 (concise)
- What it is: An 8-pin IC from Linear Technology (now Analog Devices), designated by the IS8 package suffix (SO-8/MSOP-8). It belongs to the LTC1485 family.
- Purpose: A microprocessor-voltage supervisor/reset monitor. It watches supply rails and generates a reset/interrupt when rails cross programmed thresholds, aiding brown‑out and power-on reset protection.
- Typical features (variant dependent): low quiescent current, fast reset on power-up/down, a defined reset output (often push-pull or open-drain), and fixed or adjustable thresholds. Industrial temperature variants are common in LTC versions.
- Applications: microcontroller resets and brown-out protection in embedded systems, power-on reset circuitry in automotive/industrial electronics.
Note: The exact electrical specs, thresholds, and behavior depend on the specific LTC1485IS8 variant. For precise performance, refer to the official datasheet for the exact part number.
- What it is: An 8-pin IC from Linear Technology (now Analog Devices), designated by the IS8 package suffix (SO-8/MSOP-8). It belongs to the LTC1485 family.
- Purpose: A microprocessor-voltage supervisor/reset monitor. It watches supply rails and generates a reset/interrupt when rails cross programmed thresholds, aiding brown‑out and power-on reset protection.
- Typical features (variant dependent): low quiescent current, fast reset on power-up/down, a defined reset output (often push-pull or open-drain), and fixed or adjustable thresholds. Industrial temperature variants are common in LTC versions.
- Applications: microcontroller resets and brown-out protection in embedded systems, power-on reset circuitry in automotive/industrial electronics.
Note: The exact electrical specs, thresholds, and behavior depend on the specific LTC1485IS8 variant. For precise performance, refer to the official datasheet for the exact part number.
Features
Here are the core features of LTC1485IS8 (8-pin MSOP package):
- High-side load switch with built-in current-limit protection
- Overcurrent/short-circuit protection
- Reverse-current and reverse-battery protection
- Undervoltage lockout (UVLO)
- Enable control input to turn the switch on/off
- Fault/Status output flag
- Thermal shutdown protection
- Low quiescent current
- Compact 8-pin MSOP (IS8) package suitable for power-rail protection and hot-swap applications
- High-side load switch with built-in current-limit protection
- Overcurrent/short-circuit protection
- Reverse-current and reverse-battery protection
- Undervoltage lockout (UVLO)
- Enable control input to turn the switch on/off
- Fault/Status output flag
- Thermal shutdown protection
- Low quiescent current
- Compact 8-pin MSOP (IS8) package suitable for power-rail protection and hot-swap applications
Pinout
LTC1485IS8 is an 8-pin device (IS8 denotes an 8-pin package, typically an SOIC/MSOP). Function: hot‑swap/current‑limit controller used to protect power rails from inrush and overcurrent during hot-plug events.
Manufacturer
Manufacturer: Analog Devices, Inc. (ADI).
Kind of company: A global American semiconductor company that designs and manufactures analog, mixed-signal, and DSP integrated circuits (it acquired Linear Technology in 2017, and LTC parts originate from that lineage).
Kind of company: A global American semiconductor company that designs and manufactures analog, mixed-signal, and DSP integrated circuits (it acquired Linear Technology in 2017, and LTC parts originate from that lineage).
Application
- Hot‑swap protection for power rails in backplanes, servers, telecom equipment
- Overcurrent/short‑circuit protection with current‑limit on DC paths
- Power‑up/power‑down sequencing and soft‑start to reduce inrush
- Voltage monitoring and watchdog/reset functions for microprocessors
- Battery charging and power management in portable/automotive systems
- Automotive and industrial power supplies and load switching
Note: Packaging (IS8) refers to the 8‑pin variant; core functions are suitable for these application areas.
- Overcurrent/short‑circuit protection with current‑limit on DC paths
- Power‑up/power‑down sequencing and soft‑start to reduce inrush
- Voltage monitoring and watchdog/reset functions for microprocessors
- Battery charging and power management in portable/automotive systems
- Automotive and industrial power supplies and load switching
Note: Packaging (IS8) refers to the 8‑pin variant; core functions are suitable for these application areas.
Package
8‑lead SOIC (S8) package, standard plastic surface-mount.
