仕様
| 属性 | 値 |
| MinimumOperatingTemperature | - 40 C |
| MaximumOperatingTemperature | + 85 C |
| Series | M29W |
| Packaging | Reel |
| Brand | STMicroelectronics |
| ProductType | NOR Flash |
| FactoryPackQuantity:FactoryPackQuantity | 1500 |
| Subcategory | Memory & Data Storage |
| MountingStyle | SMD/SMT |
| MoistureSensitive | Yes |
| SupplyVoltage-Max | 3.6 V |
| SupplyVoltage-Min | 2.7 V |
| MemorySize | 16 Mbit |
| InterfaceType | Parallel |
| ActiveReadCurrent-Max | 10 mA |
| Package/Case | TSOP-48 |
| DeliveryRestrictions | Mouser does not sell this product in your region. |
| TimingType | Asynchronous |
| DataBusWidth | 8 bit/16 bit |
| Architecture | Block Erase |
| MemoryType | NOR |
| Speed | 70 ns |
| Standard | Common Flash Interface (CFI) |
| Organisation | 2 M x 8/1 M x 16 |
概要
Description
The M29W160EB70N6F is a 16 Mbit (2MB) flash memory device produced by STMicroelectronics. It features a dual-bank architecture, allowing for simultaneous read and write operations, which enhances performance in embedded systems. The device operates on a supply voltage of 2.7V to 3.6V and supports standard command sets for ease of integration.
Key specifications include a maximum access time of 70 ns, which enables fast data retrieval, and it supports both asynchronous and synchronous interfaces. The M29W160EB70N6F is suitable for a variety of applications, including firmware storage, boot code, and data logging in consumer electronics, automotive, and industrial systems.
It also offers features such as sector erase, byte or word programming, and multiple programming cycles, ensuring data integrity and reliability. Overall, the M29W160EB70N6F is a versatile and efficient solution for non-volatile storage in modern electronic devices.
Key specifications include a maximum access time of 70 ns, which enables fast data retrieval, and it supports both asynchronous and synchronous interfaces. The M29W160EB70N6F is suitable for a variety of applications, including firmware storage, boot code, and data logging in consumer electronics, automotive, and industrial systems.
It also offers features such as sector erase, byte or word programming, and multiple programming cycles, ensuring data integrity and reliability. Overall, the M29W160EB70N6F is a versatile and efficient solution for non-volatile storage in modern electronic devices.
Equivalent
The M29W160EB70N6F is a 16 Mb (2 MB) Flash memory chip. Equivalent products include the AMD AM29LV160B, Spansion S29GL016A, and Micron MT29F160G. These chips typically offer similar features, such as a 70 ns access time and a parallel interface. Always verify compatibility with your specific application requirements before substitution.
Pinout
The M29W160EB70N6F is a 16-megabit (2 M x 8) flash memory device manufactured by STMicroelectronics. It features a total of 44 pins.
The primary functions of the pins include:
1. Address Pins (A0-A18): Used to select memory locations.
2. Data Pins (DQ0-DQ7): Bidirectional data bus for reading and writing data.
3. Chip Enable (CE): Activates the chip for read or write operations.
4. Output Enable (OE): Enables data output on the DQ pins during read operations.
5. Write Enable (WE): Controls write operations to the memory.
6. Reset (RESET): Resets the device to a known state.
7. Ready/Busy (RY/BY): Indicates the status of the memory (ready or busy).
8. Vcc: Power supply pin.
9. GND: Ground reference pin.
This device is suitable for various applications requiring non-volatile storage, such as firmware storage in embedded systems.
The primary functions of the pins include:
1. Address Pins (A0-A18): Used to select memory locations.
2. Data Pins (DQ0-DQ7): Bidirectional data bus for reading and writing data.
3. Chip Enable (CE): Activates the chip for read or write operations.
4. Output Enable (OE): Enables data output on the DQ pins during read operations.
5. Write Enable (WE): Controls write operations to the memory.
6. Reset (RESET): Resets the device to a known state.
7. Ready/Busy (RY/BY): Indicates the status of the memory (ready or busy).
8. Vcc: Power supply pin.
9. GND: Ground reference pin.
This device is suitable for various applications requiring non-volatile storage, such as firmware storage in embedded systems.
Manufacturer
The M29W160EB70N6F is a flash memory chip manufactured by STMicroelectronics. STMicroelectronics is a multinational electronics and semiconductor manufacturer headquartered in Geneva, Switzerland. The company specializes in a wide range of semiconductor products and technologies, including microcontrollers, memory devices, and various integrated circuits used in diverse applications such as automotive, industrial, and consumer electronics. Founded in 1987 through the merger of Italian and French companies, STMicroelectronics is known for its commitment to innovation and developing solutions that enhance the performance and efficiency of electronic systems across various industries.
Application
The M29W160EB70N6F is a 16 megabit (2M x 8) Flash memory chip commonly used in embedded systems. Its application areas include:
1. Telecommunications: Storing firmware and configuration data.
2. Consumer Electronics: Used in devices like digital cameras, set-top boxes, and televisions.
3. Automotive: For engine control units and infotainment systems.
4. Industrial Automation: In programmable logic controllers (PLCs) and other control systems.
5. Networking Equipment: In routers and switches for firmware updates.
Overall, it serves in applications requiring non-volatile data storage and quick access times.
1. Telecommunications: Storing firmware and configuration data.
2. Consumer Electronics: Used in devices like digital cameras, set-top boxes, and televisions.
3. Automotive: For engine control units and infotainment systems.
4. Industrial Automation: In programmable logic controllers (PLCs) and other control systems.
5. Networking Equipment: In routers and switches for firmware updates.
Overall, it serves in applications requiring non-volatile data storage and quick access times.
Package
The M29W160EB70N6F is packaged in a TSOP (Thin Small Outline Package) with a configuration of 48 pins. This package type is designed for surface mounting and is commonly used in flash memory applications for its compact size and efficiency.
