画像は参考用です
MAX1241AESA+T
+BOMIC ADC 12BIT SAR 8SOIC
-
メーカーアナログ・デバイセズ社/マキシム・インテグレーテッド
-
メーカー品番 #MAX1241AESA+T
-
在庫状況7659
365 日間品質保証
7*24 日間の品質保証
90-時間単位のサービス保証
1日間のアフターサービス保証
仕様
| 属性 | 値 |
| Supplier | Analog Devices Inc./Maxim Integrated |
| Package | Tape & Reel (TR) |
| ProductStatus | Active |
| NumberofBits | 12 |
| SamplingRate(PerSecond) | 73k |
| NumberofInputs | 1 |
| InputType | Single Ended |
| DataInterface | SPI |
| Configuration | S/H-ADC |
| Ratio-S/H:ADC | 1:1 |
| NumberofA/DConverters | 1 |
| Architecture | SAR |
| ReferenceType | External |
| Voltage-SupplyAnalog | 2.7V ~ 5.25V |
| Voltage-SupplyDigital | 2.7V ~ 5.25V |
| OperatingTemperature | -40°C ~ 85°C |
| Package/Case | 8-SOIC (0.154, 3.90mm Width) |
| SupplierDevicePackage | 8-SOIC |
概要
Description
MAX1241AESA+T is a 12‑bit SAR analog‑to‑digital converter from Maxim Integrated. It converts a single-ended analog input to a 12‑bit digital word via a SPI‑like serial interface. It operates from a single supply (about 2.7–5.25 V) with low power for data‑acquisition and instrumentation. The device uses an external reference and includes a sample/hold and conversion logic. The AESA suffix denotes an automotive/extended‑temperature variant, while +T indicates Tape‑and‑Reel packaging; check the datasheet for exact temp range and packaging. Interfaces: CS, SCK, DIN, DOUT (SPI pins). Typical applications: microcontroller‑based DAQ, sensor front‑ends, motor control, automotive electronics. Performance notes: 12‑bit resolution, conversion rate limited by the model (often up to ~1 MSPS), with specified INL/DNL and SNR. For precise electrical specs, timing diagrams, and pinout, refer to the MAX1241AESA+T datasheet.
Equivalent
Equivalents depend on exact specs. MAX1241AESA+T is a 12-bit, 1 MSPS, single-channel SPI ADC with automotive-grade (-AESA) temperature range. For exact replacements, share: Vsup, Vref, max sample rate, channel count, SPI mode, temp range, and package. General 12-bit SPI options to explore: Analog Devices AD7923/AD7924; TI ADS78xx/ADS788x; Microchip MCP3201/MCP3204. Please confirm specs for precise cross-reference.
Features
Key features of MAX1241AESA+T (12‑bit, 4‑channel ADC):
- 12‑bit SAR ADC with 4 multiplexed input channels and internal sample/hold
- Up to ~1 MSPS conversion rate
- SPI‑compatible serial interface (DIN/DOUT/SCLK/CS)
- External reference input (VREF) option for accuracy; supports buffering
- Single‑supply operation from about 2.7 V to 5.25 V
- Wide operating temperature: -40°C to +125°C (AESA automotive grade)
- 28‑pin package; Tape & Reel option available (+T)
- Low‑power operation with selectable power‑down/shutdown
- Easy channel selection via address bits; suitable for multiplexed measurement systems
Note: Refer to the datasheet for exact max throughput, timings, and pinout details.
- 12‑bit SAR ADC with 4 multiplexed input channels and internal sample/hold
- Up to ~1 MSPS conversion rate
- SPI‑compatible serial interface (DIN/DOUT/SCLK/CS)
- External reference input (VREF) option for accuracy; supports buffering
- Single‑supply operation from about 2.7 V to 5.25 V
- Wide operating temperature: -40°C to +125°C (AESA automotive grade)
- 28‑pin package; Tape & Reel option available (+T)
- Low‑power operation with selectable power‑down/shutdown
- Easy channel selection via address bits; suitable for multiplexed measurement systems
Note: Refer to the datasheet for exact max throughput, timings, and pinout details.
Pinout
Pin count: 8 pins (8-pin package, e.g., SOIC/DIP-8).
Main functions (pin names):
- AIN (analog input)
- GND (ground)
- VDD (supply)
- CNV/CONVST (convert/start conversion)
- CS (chip select)
- SCK (serial clock)
- DIN (data in)
- DOUT (data out)
Note: This is a SPI-compatible, 12-bit ADC variant typical for MAX1241AESA+T; pinout and labeling correspond to the 8-pin package.
Main functions (pin names):
- AIN (analog input)
- GND (ground)
- VDD (supply)
- CNV/CONVST (convert/start conversion)
- CS (chip select)
- SCK (serial clock)
- DIN (data in)
- DOUT (data out)
Note: This is a SPI-compatible, 12-bit ADC variant typical for MAX1241AESA+T; pinout and labeling correspond to the 8-pin package.
Manufacturer
- Manufacturer: Maxim Integrated (now part of Analog Devices, Inc.)
- What kind of company: A semiconductor company specializing in analog and mixed-signal integrated circuits, sensors, and high-performance signal-processing ICs.
- What kind of company: A semiconductor company specializing in analog and mixed-signal integrated circuits, sensors, and high-performance signal-processing ICs.
Application
Common application areas for MAX1241AESA+T (12-bit ADC, high speed):
- Data acquisition systems and instrumentation
- Automotive sensor interfaces and motor-control front-ends
- Industrial automation and process monitoring
- Medical instrumentation and patient-monitoring devices
- Test/measurement equipment (oscilloscopes, DMMs, analyzers)
- Audio/video signal processing front-ends
- Communications receivers, RF sampling, and software-defined radio
- Aerospace/defense sensing and telemetry
- Data acquisition systems and instrumentation
- Automotive sensor interfaces and motor-control front-ends
- Industrial automation and process monitoring
- Medical instrumentation and patient-monitoring devices
- Test/measurement equipment (oscilloscopes, DMMs, analyzers)
- Audio/video signal processing front-ends
- Communications receivers, RF sampling, and software-defined radio
- Aerospace/defense sensing and telemetry
Package
Package: AESA (Maxim’s AESA leaded package). The +T suffix denotes Tape‑and‑Reel packaging.
