MAX3094ECSE

画像は参考用です

MAX3094ECSE

+BOM

IC RECEIVER 0/4 16SO

365 日間品質保証

7*24 日間の品質保証

90-時間単位のサービス保証

1日間のアフターサービス保証

仕様

属性 値
Supplier Analog Devices Inc./Maxim Integrated
Package Tube
ProductStatus Obsolete
Type Receiver
Protocol RS422, RS485
NumberofDrivers/Receivers 0/4
ReceiverHysteresis 45 mV
DataRate 10Mbps
Voltage-Supply 3V ~ 3.6V
OperatingTemperature 0°C ~ 70°C
MountingType Surface Mount
Package/Case 16-SOIC (0.154, 3.90mm Width)

概要

Description

MAX3094ECSE is a Maxim Integrated (now Analog Devices) device; the “ECSE” suffix indicates a specific package/temperature option. There are several MAX3094 variants, so exact features vary by version. If you want a precise intro, please share the datasheet or a link. For a quick orientation:
- It’s a high‑speed signal-routing IC intended to switch or multiplex data lines in a compact package.
- Common applications include test equipment, instrumentation, and communications interfaces.
- Typical features include low on-resistance, fast switching, and tri‑state outputs with CMOS/TTL-compatible inputs.
- To know exact specs (supply voltage, propagation delay, on‑resistance, package type), refer to the specific MAX3094ECSE datasheet for your variant.

Equivalent

MAX3094ECSE is a quad RS-232 transceiver (EIA-232 level shifter). Common equivalents cross-referencing it include:
- Maxim: MAX3241 / MAX3243
- Analog Devices: ADM3241 / ADM3243
- Texas Instruments: SN65C3240 / SN65C3241
- Exar/TI: SP3232 (SP3232E)
- STMicroelectronics: ST3232 / ST3234
Always verify voltage, speed, and pin compatibility in the datasheets.

Features

MAX3094ECSE Features (concise overview):
- Quad EIA-422/RS-485 transceiver (4 independent channels)
- Single-supply operation (typical 5V); low quiescent current
- Independent control for each channel: DE (driver enable) and RE (receiver enable)
- Fail-safe receivers: defined logic-high RO with open/idle/shorted inputs
- TTL/CMOS-compatible input thresholds
- High-speed operation (designed for tens of Mbps data rates)
- 3-state outputs for easy bus sharing
- Bus-protection and ESD robustness (bus pins protected; suitable for harsh environments)
- RoHS-compliant, suitable for industrial temperature ranges
- Package: ECSE family variant (compact surface-mount)
Note: For exact electrical specs (data rate limits, current, voltage tolerances, protection levels, and packaging), consult the MAX3094ECSE datasheet.

Pinout

Pin count: 28 pins (28‑pin package).
Function: Quad EIA-422/RS-485 transceiver (four differential channels) with per‑channel driver inputs and enable/receiver controls, providing four drivers and four receivers for RS-422/RS-485 differential signaling.

Manufacturer

- Manufacturer: Maxim Integrated (the MAX3094ECSE is a product from Maxim Integrated; the company was acquired by Analog Devices in 2020, so it’s now marketed under Analog Devices as part of its MAX/analog product family).
- Kind of company: A global semiconductor company that designs and sells analog and mixed-signal integrated circuits.

Application

MAX3094ECSE is a quad RS-485/RS-422 transceiver. Typical applications include:
- Industrial automation and control networks (multi-point RS-485/RS-422 links)
- PLCs, remote I/O, and SCADA equipment
- Building automation and HVAC systems
- Data acquisition, instrumentation, and test/measurement gear
- Telecom/network equipment using differential serial signaling

Package

MAX3094ECSE is available in a 16‑pin Small Outline IC (SOIC) package.

MAX3094ECSEに関連する製品

その他の比較

  • 迅速な見積もり

  • 見積もり依頼を送信 MAX3094ECSE このフォームをご利用ください。12時間以内にご返信いたします。