MAX326CEE+T

画像は参考用です

MAX326CEE+T

+BOM
ISO9001 Quality Control ISO45001 ISO14001 100% Genuine

IC SWITCH QUAD SPST 16QSOP

  • メーカーアナログ・デバイセズ社/マキシム・インテグレーテッド

  • メーカー品番 #MAX326CEE+T

  • データシート MAX326CEE+T DataSheet

  • パッケージ SSOP-16

  • 在庫状況4213

365 日間品質保証

7*24 日間の品質保証

90-時間単位のサービス保証

1日間のアフターサービス保証

仕様

属性 値
Supplier Analog Devices Inc./Maxim Integrated
Package / Case Tape & Reel (TR)
Part Status Active
Switch Circuit SPST - NC
Multiplexer / Demultiplexer Circuit 1:1
Number of Circuits 4
On - State Resistance(Max) 3.5kOhm
Channel - to - Channel Matching(ΔRon) 175Ohm
Voltage - Supply, Single (V+) 10V ~ 30V
Voltage - Supply, Dual (V±) ±5V ~ 18V
Switch Time(Ton Toff)(Max) 1µs, 500ns
Charge Injection 2pC
Channel Capacitance(CS(off)CD(off)) 1.7pF, 1.7pF
Current - Leakage(IS(off))(Max) 10pA
Crosstalk -90dB @ 100kHz
Operating Temperature 0°C ~ 70°C (TA)
Mounting Type Surface Mount

概要

Description

MAX326CEE+T is a member of Maxim Integrated’s MAX326xx ultra‑low‑power microcontroller family. It’s a compact 32‑bit MCU (ARM Cortex core) designed for battery‑powered sensing applications—wearables, medical devices, and IoT nodes—where long battery life and fast wakeup matter. It combines a low‑power core with on‑chip analog peripherals (ADC/DAC, op‑amps, comparators), flexible timers, and multiple serial interfaces (SPI, I2C, UART) plus embedded memory. The +T suffix typically indicates a variant with extended temperature/industrial-grade capabilities; exact temperature range and features depend on the specific part, so check the datasheet. Supported by Maxim’s development tools, kits, and example firmware for rapid prototyping and deployment.

Features

Here are the typical features of MAX326CEE+T (family-wide; exact specs vary by device—see datasheet for exact numbers):
- 32-bit ARM Cortex-M4F MCU core (DSP-capable)
- Clock: up to tens of MHz (specific max per device)
- On-chip memory: Flash and RAM (sizes vary by part)
- Rich analog: multiple 12‑bit ADCs, DACs, op-amps, comparators, and temperature sensor
- Peripherals: UART/ USART, I2C, SPI, I2S, USB Full-Speed, PWM, timers, RTC, watchdog
- Security: hardware crypto engine (AES/SHA), secure boot, memory protection features
- Power management: ultra-low-power modes with rapid wakeup; on-chip regulator options and battery monitoring
- Debug/Programming: SWD/JTAG support, on-chip bootloader
- Packaging: compact packages (QFN/LQFP) with extended temperature options
- Robustness: ESD protection and reliability features
Note: exact memory size, clock speed, peripherals count, and temperature range depend on the specific MAX326CEE+T device. Refer to the exact datasheet for precise specs.

Manufacturer

- Manufacturer: Maxim Integrated (now part of Analog Devices, Inc.)
- What kind of company: An American multinational semiconductor company that designs and manufactures analog and mixed‑signal integrated circuits.

Application

MAX326CEE+T is part of Maxim’s ultra-low-power MAX326 MCU family, aimed at wearable, medical and IoT sensing. Typical applications:
- Wearables and medical wearables (fitness trackers, portable vital-sign monitors, glucose meters)
- Battery-powered sensors and data loggers (environmental, asset tracking, smart meters)
- Compact IoT edge devices and remote sensing nodes
- Handheld/portable medical or diagnostic instruments
- Small consumer electronics requiring long battery life and compact size

Package

+T indicates Tape-and-Reel packaging. The MAX326CEE part is available in a 32‑pin QFN (5×5 mm) package.

MAX326CEE+Tに関連する製品

  • 迅速な見積もり

  • 見積もり依頼を送信 MAX326CEE+T このフォームをご利用ください。12時間以内にご返信いたします。