MC33742PEPR2

画像は参考用です

MC33742PEPR2

+BOM

IC SYSTEM BASE W/CAN 48QFN

365 日間品質保証

7*24 日間の品質保証

90-時間単位のサービス保証

1日間のアフターサービス保証

仕様

属性 値
Supplier Rochester Electronics, LLC
Package Bulk
ProductStatus Active
Applications Automotive
Interface SPI Serial
Voltage-Supply 5.5V ~ 18V
Package/Case 48-VFQFN Exposed Pad
SupplierDevicePackage 48-QFN-EP (7x7)

概要

Description

MC33742PEPR2 is an automotive-grade CAN transceiver from NXP/Freescale. It provides the physical layer between a microcontroller’s CAN controller and the CAN bus, translating TXD/RXD signals to differential CAN_H and CAN_L levels and back. The device integrates fault protection and diagnostics essential for vehicle networks, including undervoltage/overvoltage protection, bus short-circuit protection, thermal protection, ESD, and wake/sleep control. It supports classic CAN (2.0A/B) and is used in ECUs and body electronics where robust, fault-tolerant CAN communication is required. Package variants (such as PEPR2) denote specific RoHS-compliant packaging. For exact electrical specs, pinout, and diagnostic flags, consult the datasheet.

Equivalent

MC33742PEPR2 is an automotive CAN transceiver. Direct one-to-one equivalents vary by package and features, but common cross-references (CAN transceivers with similar specs) include:
- TI SN65HVD23x/24x/25x
- Microchip MCP2551 / MCP2561
- NXP TJA1040 / TJA1042
- NXP PCA82C251
- Infineon TLE9250 / TLE9252
Note: verify pinout, supply voltage, data rate, and fault/standby features against the datasheet and use a distributor cross-reference.

Features

Here are the main features of MC33742PEPR2 (concise):
- 4-channel high-speed CAN transceiver with integrated diagnostics
- ISO 11898-2 compliant CAN physical layer
- Wide automotive supply range with protection (undervoltage/overvoltage)
- Short-circuit protection on CANH/CANL to GND and to VBAT
- Load-dump tolerance and transient protection
- Thermal shutdown and over-temperature warning
- Channel fault/diagnostic reporting with status outputs
- Sleep/low-power standby mode with very low quiescent current
- Slew-rate control to reduce EMI and improve signal integrity
- ESD protection on CAN pins
- Independent control/diagnostic signaling for each channel (if applicable)
- Suitable packaging variant PEPR2
Note: For exact voltage ranges, current specs, and pinout, refer to the datasheet.

Pinout

Pin count: 28 pins (28‑pin package).
Function: Freescale/NXP MC33742PEPR2 is a 3‑phase brushless DC motor driver/controller with integrated power MOSFET outputs and commutation logic, providing current regulation and protection (OC, UV, overtemp) for automotive BLDC motor control. Supports sensorless or Hall-based feedback.

Manufacturer

- Manufacturer: NXP Semiconductors
- What kind of company: A Dutch multinational semiconductor company (global technology company) that designs and manufactures integrated circuits and solutions for automotive, embedded processing, and secure connectivity.

Package

Plastic LQFP package, 48 pins with an exposed pad (EP).

MC33742PEPR2に関連する製品

その他の比較

  • 迅速な見積もり

  • 見積もり依頼を送信 MC33742PEPR2 このフォームをご利用ください。12時間以内にご返信いたします。