画像は参考用です
MIC2777-25YM5-TR
+BOMIC SUPERVISOR 2 CHANNEL SOT23-5
-
メーカーマイクロチップ・テクノロジー
-
メーカー品番 #MIC2777-25YM5-TR
-
データシート MIC2777-25YM5-TR DataSheet
-
パッケージ SOT-23-5
-
在庫状況4475
365 日間品質保証
7*24 日間の品質保証
90-時間単位のサービス保証
1日間のアフターサービス保証
仕様
| 属性 | 値 |
| Package | Tape & Reel (TR) |
| ProductStatus | Active |
| Type | Multi-Voltage Supervisor |
| NumberofVoltagesMonitored | 2 |
| Voltage-Threshold | 2.53V, Adj |
| Output | Complementary |
| Reset | Active High/Active Low |
| ResetTimeout | 140ms Minimum |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| Package/Case | SC-74A, SOT-753 |
概要
Description
Key points
- Adjustable current limit via an external resistor
- Soft-start to reduce inrush
- Protection: overcurrent/short‑circuit, undervoltage lockout, and open-load detection
- Fault/status output for MCU monitoring
Typical uses
- Server, telecom, and other hot‑swap power rails
- Disk drives, backplanes, and other plug-in modules
Packaging/ordering
- YM5 package; -TR indicates Tape & Reel
Note
- Refer to the MIC2777 datasheet for exact electrical specs, pinout, and resistor calculations.
Equivalent
- TI: TPS3800/TPS383x family
- Microchip: MCP13x/MCP12x (2.5-V variants)
- Maxim: MAX809/MAX810 (2.5-V options)
- Onsemi: NCS/NCP series 2.5-V reset supervisors
- ST: STM803/STM805 family (2.5-V)
For exact cross-reference, provide package and current requirements, or I can fetch distributor cross-references.
Features
- Fixed output option (2.5 V for the -25 variant)
- Enable/control input to turn the regulator on/off
- Low dropout/high efficiency regulator
- Overcurrent/short-circuit protection
- Thermal shutdown protection
- Reverse-current protection
- Stable with ceramic capacitors
- Small package with Tape & Reel (YM5/TR) packaging
Note: Exact specifications (input range, max load current, accuracy, dropout, quiescent current) depend on the specific variant; confirm with the datasheet for precise figures.
Pinout
- Function: High‑side hot‑swap controller with current limiting and protection (inrush limiting, overcurrent/overvoltage/short‑circuit protection) that drives an external MOSFET to protect a live power path; includes enable and fault/status signaling.
Manufacturer
Application
- Hot‑swap and power‑path protection for backplanes and multi‑card systems
- High‑side load switching with current limiting in telecom, networking, automotive, and industrial equipment
- Power management and sequencing for battery‑powered portable devices
- LED lighting/backlight drivers requiring controlled current and fault protection
- General DC rail protection in consumer electronics
These reflect typical uses of MIC2777‑25YM5‑TR as a high‑side switch/power‑path protection device.