仕様
| 属性 | 値 |
| Package | Tube |
| ProductStatus | Active |
| OutputConfiguration | Positive |
| OutputType | Fixed |
| NumberofRegulators | 1 |
| Voltage-Input(Max) | 16V |
| Voltage-Output(Min/Fixed) | 5V |
| VoltageDropout(Max) | 0.63V @ 1A |
| Current-Output | 1A |
| ControlFeatures | Enable |
| ProtectionFeatures | Over Current, Over Temperature, Reverse Polarity |
| OperatingTemperature | -40°C ~ 125°C |
| MountingType | Surface Mount |
| Package/Case | 8-SOIC (0.154, 3.90mm Width) |
概要
Description
MIC39101-5.0YM is a fixed-output low-dropout linear regulator from Micrel (now Microchip). It provides a regulated 5.0 V rail from a higher input, making it suitable for powering microcontrollers and other digital ICs in compact designs. The “-5.0” denotes the 5.0 V fixed output, and the “YM” suffix refers to the specific package variant (a small, surface-mount package). Key features typically include protection features such as overcurrent/short-circuit protection and thermal shutdown, plus stable operation with standard input/output capacitors (low-ESR). Common applications are battery-powered and portable electronics, embedded systems, and other devices needing a compact 5 V supply. Use requires Vin within the specified range and proper input/output capacitors per the datasheet. For exact electrical specs, pinout, and package details, consult the MIC39101 datasheet.
Equivalent
MIC39101-5.0YM is Microchip/Micrel fixed 5 V LDO. There is no guaranteed drop‑in; check pinout/package when replacing. Functionally similar 5.0 V LDOs include:
- LM1117-5.0
- AMS1117-5.0
- LD1117V50 (ST)
- NCP1117-5.0 (ON Semiconductor)
- TLV1117-5.0
- LP2985-5.0
Always verify pinout, dropout, quiescent current, and package compatibility.
- LM1117-5.0
- AMS1117-5.0
- LD1117V50 (ST)
- NCP1117-5.0 (ON Semiconductor)
- TLV1117-5.0
- LP2985-5.0
Always verify pinout, dropout, quiescent current, and package compatibility.
Features
Concise features of MIC39101-5.0YM (5.0 V reset supervisor):
- 5.0 V threshold voltage detector for microprocessor reset
- Power-on reset: asserts reset until Vcc is stable
- Manual reset input for external forcing of reset
- Reset output suitable for directly driving MCU reset lines (TTL/CMOS compatible)
- Very low quiescent current (suitable for battery-powered apps)
- Wide operating voltage and temperature ranges (industrial grade)
- Package: YM (surface-mount)
Note: For exact electrical specs (threshold tolerance, reset delay, current, and pinout), refer to the official datasheet.
- 5.0 V threshold voltage detector for microprocessor reset
- Power-on reset: asserts reset until Vcc is stable
- Manual reset input for external forcing of reset
- Reset output suitable for directly driving MCU reset lines (TTL/CMOS compatible)
- Very low quiescent current (suitable for battery-powered apps)
- Wide operating voltage and temperature ranges (industrial grade)
- Package: YM (surface-mount)
Note: For exact electrical specs (threshold tolerance, reset delay, current, and pinout), refer to the official datasheet.
Pinout
Pin count: 5 pins.
Function: Fixed-output 5.0 V low-dropout regulator (LDO) in a SOT-23-5 package with an enable input. It provides a regulated 5 V output from a higher input voltage. Pin roles are VIN, VOUT, GND, EN, and a NC/BYPASS/adjust pin depending on variant.
Function: Fixed-output 5.0 V low-dropout regulator (LDO) in a SOT-23-5 package with an enable input. It provides a regulated 5 V output from a higher input voltage. Pin roles are VIN, VOUT, GND, EN, and a NC/BYPASS/adjust pin depending on variant.
Manufacturer
Manufacturer: Microchip Technology Inc. (the MIC39101 line originated from Micrel Semiconductor; Microchip acquired Micrel in 2015).
What kind of company: A global semiconductor company that designs and manufactures integrated circuits, including microcontrollers and analog/mixed-signal ICs.
What kind of company: A global semiconductor company that designs and manufactures integrated circuits, including microcontrollers and analog/mixed-signal ICs.
Application
Application areas of MIC39101-5.0YM:
- Fixed 5V low-dropout regulator for stable 5V rails
- Local power for digital logic: microcontrollers, DSPs, FPGAs, memory
- Post-regulator or auxiliary supply in battery-powered systems
- Power management in telecom, networking, instrumentation equipment
- Supply for analog front-ends: sensors, ADCs, op-amps requiring a 5V rail
Note: used where a compact, low-noise 5V source is needed from a higher input with good transient response.
- Fixed 5V low-dropout regulator for stable 5V rails
- Local power for digital logic: microcontrollers, DSPs, FPGAs, memory
- Post-regulator or auxiliary supply in battery-powered systems
- Power management in telecom, networking, instrumentation equipment
- Supply for analog front-ends: sensors, ADCs, op-amps requiring a 5V rail
Note: used where a compact, low-noise 5V source is needed from a higher input with good transient response.
Package
It uses a 5-pin SOT-23 package (SOT-23-5).
