画像は参考用です
MX25U1635FBAI-10G
+BOMIC FLASH 16MBIT SPI/QUAD 12WLCSP
-
メーカーマクロニクス
-
メーカー品番 #MX25U1635FBAI-10G
-
在庫状況4926
365 日間品質保証
7*24 日間の品質保証
90-時間単位のサービス保証
1日間のアフターサービス保証
仕様
| 属性 | 値 |
| Series | MX25xxx35/36 - MXSMIO™ |
| PartStatus | Not For New Designs |
| BaseProductNumber | MX25U1635 |
| DigiKeyProgrammable | Not Verified |
| MemoryType | Non-Volatile |
| MemoryFormat | FLASH |
| Technology | FLASH - NOR |
| MemorySize | 16Mbit |
| MemoryOrganization | 2M x 8 |
| MemoryInterface | SPI - Quad I/O |
| ClockFrequency | 104 MHz |
| WriteCycleTime-Word,Page | 30µs, 1.5ms |
| Voltage-Supply | 1.65V ~ 2V |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| Package | 12-UFBGA, WLCSP |
| SupplierDevicePackage | 12-WLCSP |
| Packaging | Tape & Reel (TR) |
概要
Description
MX25U1635FBAI-10G is Macronix’s 16‑Mbit serial SPI flash memory (MX25U family). It is used to store firmware, code, or data for embedded systems.
Key points:
- Capacity: 16 Mbit (2 MBytes).
- Interface: SPI serial; supports standard read and fast read, with optional Dual/Quad I/O modes on some devices.
- Organization andErase/Program: 4 KB sectors, 64 KB blocks, and a chip erase; page program typically 256 bytes.
- Speed: Designed for fast SPI operation (clock up to about 100+ MHz, depending on the exact lot and mode).
- Voltage and package: operates in a typical 2.7–3.6 V range; available in an 8‑pin package (BAI) with various temperature grades (the -10G suffix denotes package/grade options).
Use cases: firmware storage, boot code, configuration data, and general persistent storage in microcontroller-based systems. For exact electrical characteristics and timings, refer to the full datasheet and the -10G variant specifics.
Key points:
- Capacity: 16 Mbit (2 MBytes).
- Interface: SPI serial; supports standard read and fast read, with optional Dual/Quad I/O modes on some devices.
- Organization andErase/Program: 4 KB sectors, 64 KB blocks, and a chip erase; page program typically 256 bytes.
- Speed: Designed for fast SPI operation (clock up to about 100+ MHz, depending on the exact lot and mode).
- Voltage and package: operates in a typical 2.7–3.6 V range; available in an 8‑pin package (BAI) with various temperature grades (the -10G suffix denotes package/grade options).
Use cases: firmware storage, boot code, configuration data, and general persistent storage in microcontroller-based systems. For exact electrical characteristics and timings, refer to the full datasheet and the -10G variant specifics.
Equivalent
Common cross-references for a 16-Mbit SPI flash like MX25U1635FBAI-10G (3.3V, 8-pin, supports single/dual/quad SPI):
- Winbond W25Q16JVSSIG
- Winbond W25Q16FVSSIG
- GigaDevice GD25Q16CIGR
- ISSI IS25LPX016D
- Macronix MX25L1635FMI-10G
- Puya P25Q16UWE
Note: verify exact voltage, timing, and package for drop-in compatibility.
- Winbond W25Q16JVSSIG
- Winbond W25Q16FVSSIG
- GigaDevice GD25Q16CIGR
- ISSI IS25LPX016D
- Macronix MX25L1635FMI-10G
- Puya P25Q16UWE
Note: verify exact voltage, timing, and package for drop-in compatibility.
Features
MX25U1635FBAI-10G is a 16-Mbit serial NOR flash with high-speed SPI support. Key features:
- 16 Mbit (2 MB) serial NOR flash; 3V operation (roughly 2.7–3.6 V)
- High-speed SPI clock up to 104 MHz; supports standard SPI and high-speed modes
- Dual/Quad I/O (DQ) SPI modes and QPI read for faster transfers
- 256-byte page program; 4 KB sectors; 32 KB and 64 KB blocks; chip erase
- Endurance: ~100k P/E cycles; data retention ~20 years
- Low power: Deep Power-Down mode with very low current; fast wakeup
- Security/protection: hardware write protection, status/config registers, protection mechanisms
- Temperature range: industrial -40°C to 85°C
- JEDEC-compliant, reliable serial NOR architecture
- Packaging: 8-pin package (SOP8/US8 variants) suitable for compact designs
This makes it suitable for code storage, boot firmware, and other embedded-NOR flash needs in space- and power-constrained devices.
- 16 Mbit (2 MB) serial NOR flash; 3V operation (roughly 2.7–3.6 V)
- High-speed SPI clock up to 104 MHz; supports standard SPI and high-speed modes
- Dual/Quad I/O (DQ) SPI modes and QPI read for faster transfers
- 256-byte page program; 4 KB sectors; 32 KB and 64 KB blocks; chip erase
- Endurance: ~100k P/E cycles; data retention ~20 years
- Low power: Deep Power-Down mode with very low current; fast wakeup
- Security/protection: hardware write protection, status/config registers, protection mechanisms
- Temperature range: industrial -40°C to 85°C
- JEDEC-compliant, reliable serial NOR architecture
- Packaging: 8-pin package (SOP8/US8 variants) suitable for compact designs
This makes it suitable for code storage, boot firmware, and other embedded-NOR flash needs in space- and power-constrained devices.
Pinout
- Pin count: 8 pins
- Function: 16-Mbit SPI serial flash memory (non-volatile) with standard SPI interface. Pins include CS, CLK, DI (MOSI), DO (MISO), VCC, GND, WP#, and HOLD#.
- Function: 16-Mbit SPI serial flash memory (non-volatile) with standard SPI interface. Pins include CS, CLK, DI (MOSI), DO (MISO), VCC, GND, WP#, and HOLD#.
Manufacturer
- Manufacturer: Macronix International Corp., Ltd. (Macronix)
- What kind of company: A Taiwanese semiconductor company that designs and manufactures non-volatile memory products, including NOR/serial flash and other memory ICs.
- What kind of company: A Taiwanese semiconductor company that designs and manufactures non-volatile memory products, including NOR/serial flash and other memory ICs.
Application
MX25U1635FBAI-10G is a 16‑Mbit serial flash memory (external flash) used in many embedded systems. Typical application areas:
- Firmware/code storage and boot memory for microcontrollers/SoCs
- Firmware update media in automotive ECUs, consumer electronics, networking gear, printers, IoT gateways
- Parameter/configuration storage and small data logging in industrial, medical, wearables, and sensor devices
- Lightweight external storage for bootstrapping systems requiring fast read via Quad/dual I/O SPI
This makes it suitable for compact, low‑cost code/data storage in embedded platforms.
- Firmware/code storage and boot memory for microcontrollers/SoCs
- Firmware update media in automotive ECUs, consumer electronics, networking gear, printers, IoT gateways
- Parameter/configuration storage and small data logging in industrial, medical, wearables, and sensor devices
- Lightweight external storage for bootstrapping systems requiring fast read via Quad/dual I/O SPI
This makes it suitable for compact, low‑cost code/data storage in embedded platforms.
Package
8-pin SOP (SOP-8) package.
