画像は参考用です
MX35LF4GE4AD-Z4I
+BOMIC FLASH 4GBIT SPI/QUAD 8WSON
-
メーカーマクロニクス
-
メーカー品番 #MX35LF4GE4AD-Z4I
-
在庫状況20575
365 日間品質保証
7*24 日間の品質保証
90-時間単位のサービス保証
1日間のアフターサービス保証
仕様
| 属性 | 値 |
| Series | MX35LF |
| PartStatus | Active |
| BaseProductNumber | MX35LF4GE4AD-Z4I |
| MemoryType | Non-Volatile |
| MemoryFormat | FLASH |
| Technology | FLASH - NAND (SLC) |
| MemorySize | 4Gbit |
| MemoryOrganization | 1G x 4 |
| MemoryInterface | SPI - Quad I/O |
| ClockFrequency | 104 MHz |
| WriteCycleTime-Word,Page | 800µs |
| Voltage-Supply | 2.7V ~ 3.6V |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| Package | 8-WDFN Exposed Pad |
| SupplierDevicePackage | 8-WSON (8x6) |
| Packaging | Tray |
| AccessTime | 8 ns |
概要
Description
Equivalent
- Winbond W25Q512JV
- Micron N25Q512A
- Spansion/Cypress S25FL512SAGMF
- GigaDevice GD25Q512D
- ISSI IS25LP512D
Note: verify voltage, package and timing for your design.
Features
- Capacity: 4 Gbit (512 MB) serial NOR flash
- Interface: SPI with dual/quad I/O modes
- Performance:Fast read up to ~104 MHz
- Organization: 256-byte pages; 4 KB sectors; 64 KB blocks
- Endurance/Retention: typical ~100k P/E cycles; data retention ~20 years
- Power: low-power sleep and deep power-down modes
- Voltage: I/O and core support across standard SPI ranges (typical 2.7–3.6 V I/O)
- Operating Temp: industrial grade variants available (-40°C to 85°C)
- Package: Z4I (8-pin) style
- Security/Protection: hardware write protection, block protection, OTP/security features
Note: exact voltage ranges and temperature specs can vary by revision; refer to the datasheet for precise conditions.
Pinout
- Function: Serial (SPI) NOR flash memory (4 Gbit) used for non-volatile storage. Pins typical: VCC, GND, CS, SI/DI, SO/DO, SCLK, WP#, HOLD#.
Manufacturer
What kind of company: A Taiwan-based semiconductor company that designs and manufactures non-volatile memory products (NOR/NAND Flash, ROM) and related ICs for electronics and embedded applications.
Application
- Embedded MCUs/SoCs firmware storage and boot memory
- Automotive and industrial electronics
- Consumer electronics (set-top boxes, media players, cameras)
- Networking equipment (routers, modems, APs)
- IoT devices needing durable firmware storage
- Data logging and secure storage in embedded systems
This summarizes typical use cases where high-density, reliable flash for code storage is required.
Package
Frequently Asked Questions
Q: What is the memory density and organization of the MX35LF4GE4AD-Z4I?
A: It is a 4Gbit NAND Flash with an organization of 1G x 4 bits, ideal for high-density data storage.
Q: Does this component support Quad I/O SPI interface for faster data transfer?
A: Yes, it features an SPI - Quad I/O interface, enabling high-speed communication with a clock frequency up to 104 MHz.
Q: What is the typical page write cycle time for this NAND Flash?
A: The write cycle time per word or page is 800μs, ensuring efficient programming in non-volatile storage applications.
Q: What is the operating temperature range for this device?
A: It operates from -40°C to 85°C (TA), making it suitable for industrial and extended temperature environments.
Q: What is the supply voltage requirement for this component?
A: The voltage supply range is 2.7V to 3.6V, compatible with standard 3.3V logic systems.
Q: Does this memory use SLC NAND technology for higher reliability?
A: Yes, it uses FLASH - NAND (SLC) technology, offering superior endurance, faster read/write speeds, and lower error rates compared to MLC.
Q: What is the access time for the MX35LF4GE4AD-Z4I?
A: The access time is 8 ns, contributing to fast read operations critical for responsive system performance.
