仕様
| 属性 | 値 |
| Supplier | onsemi |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Part Status | Active |
| Diode Type | Standard |
| Voltage - DC Reverse (Vr) (Max) | 200 V |
| Current - Average Rectified(Io) | 2A |
| Voltage - Forward (Vf) (Max) @ If | 1.05 V @ 2 A |
| Speed | Fast Recovery =< 500ns, > 200mA (Io) |
| Reverse Recovery Time (trr) | 50 ns |
| Current - Reverse Leakage @ Vr | 500 nA @ 200 V |
| Mounting Type | Surface Mount |
| Supplier Device Package | SOD-123FL |
概要
Description
NHP220SFT3G seems to be a part number (likely from NHP Electric), not a standard term. It probably refers to a motor-control device (for example, a soft starter or motor starter) with a 220‑V class and a 3G revision. To give an exact introduction I’d need the datasheet or manufacturer page.
A concise generic intro would cover:
- Category and function: motor control (soft-start, overload protection, diagnostics)
- Ratings: supply voltage (around 220–240 V), current rating, protection features
- Key features: soft-start, overload/short‑circuit protection, built‑in diagnostics
- Typical use: 1– or 3‑phase motors in conveyors, pumps, fans
- Installation basics: wiring, mounting, environmental/IP rating
- Standards: compliance (UL/CE, etc.)
If you share a link or the exact manufacturer, I can tailor a precise, accurate summary.
A concise generic intro would cover:
- Category and function: motor control (soft-start, overload protection, diagnostics)
- Ratings: supply voltage (around 220–240 V), current rating, protection features
- Key features: soft-start, overload/short‑circuit protection, built‑in diagnostics
- Typical use: 1– or 3‑phase motors in conveyors, pumps, fans
- Installation basics: wiring, mounting, environmental/IP rating
- Standards: compliance (UL/CE, etc.)
If you share a link or the exact manufacturer, I can tailor a precise, accurate summary.
Equivalent
Common drop‐in MOSFET substitutes (SOT-23, P-channel, –20 … –30 V range, similar RDS(on)) include:
• Diodes Inc. DMG2305UX (–20 V, 4.5 mΩ)
• Nexperia PMV16XP (–20 V, 22 mΩ)
• ON Semiconductor FDN306P (–20 V, 170 mΩ)
• Vishay Si2301CDS (–20 V, 120 mΩ)
• Infineon BSS84P (–50 V, 2 Ω)
• Diodes Inc. DMG2305UX (–20 V, 4.5 mΩ)
• Nexperia PMV16XP (–20 V, 22 mΩ)
• ON Semiconductor FDN306P (–20 V, 170 mΩ)
• Vishay Si2301CDS (–20 V, 120 mΩ)
• Infineon BSS84P (–50 V, 2 Ω)
Pinout
NHP220SFT3G is a 3‑pin P‑channel MOSFET in an SOT‑23 style package.
Pins: Gate (G), Source (S) and Drain (D).
Function: enhancement‑mode P‑channel MOSFET used for low‑voltage high‑side switching, load switching, reverse‑polarity protection and similar power‑switching roles. (Refer to the manufacturer datasheet for exact pin mapping and electrical specifications.)
Pins: Gate (G), Source (S) and Drain (D).
Function: enhancement‑mode P‑channel MOSFET used for low‑voltage high‑side switching, load switching, reverse‑polarity protection and similar power‑switching roles. (Refer to the manufacturer datasheet for exact pin mapping and electrical specifications.)
Application
NHP220SFT3G is a high-current, low-Rds(on) N-channel power MOSFET. Typical application areas:
- DC-DC converters and point-of-load regulators
- Motor drives (BLDC/PMSM and DC motors)
- Solar/renewable inverters and power conditioning
- Uninterruptible power supplies and battery-management systems
- Automotive and industrial power electronics (inverters, DC-DC stages)
- High-efficiency AC-DC and DC-AC switching supplies
- Load switches and power-distribution applications
- DC-DC converters and point-of-load regulators
- Motor drives (BLDC/PMSM and DC motors)
- Solar/renewable inverters and power conditioning
- Uninterruptible power supplies and battery-management systems
- Automotive and industrial power electronics (inverters, DC-DC stages)
- High-efficiency AC-DC and DC-AC switching supplies
- Load switches and power-distribution applications
