仕様
| 属性 | 値 |
| Package / Case | Tray |
| Series | QorIQ P2 |
| Part Status | Obsolete |
| Core Processor | PowerPC e500mc |
| Number of Cores / Bus Width | 4 Core, 32-Bit |
| Speed | 1.2GHz |
| RAM Controllers | DDR3, DDR3L |
| Graphics Acceleration | No |
| Ethernet | 10/100/1000Mbps (5) |
| SATA | SATA 3Gbps (2) |
| USB | USB 2.0 + PHY (2) |
| Voltage - I / O | 1.0V, 1.35V, 1.5V, 1.8V, 2.5V, 3.3V |
| Operating Temperature | 0°C ~ 105°C (TA) |
概要
Description
The P2040NSN7MMC is a high-performance, low-power NXP PowerQUICC IV processor, part of the QorIQ P2 series. It features a dual-core e500mc architecture, clocked at up to 1.2 GHz, optimized for embedded networking and industrial applications.
Key specs:
- Dual e500mc cores (32-bit Power Architecture)
- Integrated DDR3 memory controller
- Multiple high-speed interfaces (PCIe, SATA, USB, Gigabit Ethernet)
- Hardware acceleration for security (SEC 4.0) and packet processing
- Low power consumption (~5W typical)
Typical uses include network routers, switches, industrial control systems, and telecom infrastructure. Its balance of performance and efficiency makes it suitable for real-time, deterministic applications.
For detailed specs, refer to NXP’s official P2040 datasheet.
Key specs:
- Dual e500mc cores (32-bit Power Architecture)
- Integrated DDR3 memory controller
- Multiple high-speed interfaces (PCIe, SATA, USB, Gigabit Ethernet)
- Hardware acceleration for security (SEC 4.0) and packet processing
- Low power consumption (~5W typical)
Typical uses include network routers, switches, industrial control systems, and telecom infrastructure. Its balance of performance and efficiency makes it suitable for real-time, deterministic applications.
For detailed specs, refer to NXP’s official P2040 datasheet.
Equivalent
The P2040NSN7MMC is a specific NXP microcontroller. Direct equivalents may not exist, but similar alternatives include:
- NXP Kinetis K20/K22 series (similar ARM Cortex-M4 cores)
- STMicroelectronics STM32F3/F4 series (comparable performance)
- Microchip SAM D21/D51 (ARM Cortex-M0+/M4)
- Texas Instruments MSP432 (Cortex-M4F)
Check pin compatibility, peripherals, and voltage requirements before substitution. For exact replacements, consult NXP's documentation or distributors.
- NXP Kinetis K20/K22 series (similar ARM Cortex-M4 cores)
- STMicroelectronics STM32F3/F4 series (comparable performance)
- Microchip SAM D21/D51 (ARM Cortex-M0+/M4)
- Texas Instruments MSP432 (Cortex-M4F)
Check pin compatibility, peripherals, and voltage requirements before substitution. For exact replacements, consult NXP's documentation or distributors.
Features
The P2040NSN7MMC is a high-performance PowerQUICC III processor from NXP, designed for networking and embedded applications. Key features include:
- Quad-core e500mc architecture, each core running at 1.2 GHz
- Integrated security engine (SEC 3.0) for encryption/decryption
- DDR3 memory controller with ECC support
- High-speed interfaces:
- PCIe Gen2, SATA 2.0, USB 2.0
- Serial RapidIO, Gigabit Ethernet (4x)
- 32 KB L1 / 128 KB L2 cache per core
- Low power consumption (~10W typical)
- 55nm process technology
Ideal for routers, switches, industrial control, and military/aerospace applications.
- Quad-core e500mc architecture, each core running at 1.2 GHz
- Integrated security engine (SEC 3.0) for encryption/decryption
- DDR3 memory controller with ECC support
- High-speed interfaces:
- PCIe Gen2, SATA 2.0, USB 2.0
- Serial RapidIO, Gigabit Ethernet (4x)
- 32 KB L1 / 128 KB L2 cache per core
- Low power consumption (~10W typical)
- 55nm process technology
Ideal for routers, switches, industrial control, and military/aerospace applications.
Pinout
The P2040NSN7MMC is a PowerQUICC III processor from NXP, featuring a 783-pin FC-PBGA package. Key functions include:
- Dual-core or single-core e500 Power Architecture CPUs (up to 1.5 GHz).
- Integrated DDR2/DDR3 memory controller.
- PCIe, SATA, USB 2.0, Serial RapidIO, and Gigabit Ethernet interfaces.
- Security acceleration (SEC) and DPAA (Data Path Acceleration Architecture).
- 32-bit DDR2/DDR3 support with ECC.
Designed for networking, telecom, and embedded applications, it balances performance and power efficiency.
- Dual-core or single-core e500 Power Architecture CPUs (up to 1.5 GHz).
- Integrated DDR2/DDR3 memory controller.
- PCIe, SATA, USB 2.0, Serial RapidIO, and Gigabit Ethernet interfaces.
- Security acceleration (SEC) and DPAA (Data Path Acceleration Architecture).
- 32-bit DDR2/DDR3 support with ECC.
Designed for networking, telecom, and embedded applications, it balances performance and power efficiency.
