仕様
| 属性 | 値 |
| Package / Case | Tube |
| Part Status | Obsolete |
| Number of I/O | 16 |
| Interface | I²C, SMBus |
| Interrupt Output | Yes |
| Features | POR |
| Output Type | Push-Pull |
| Current - Output Source / Sink | 10mA, 25mA |
| Clock Frequency | 400 kHz |
| Voltage - Supply | 2.3V ~ 5.5V |
| Operating Temperature | -40°C ~ 85°C |
| Mounting Type | Surface Mount |
概要
Description
The PCA9555DB is an integrated circuit from NXP Semiconductors, designed as a 16-bit I/O expander for I²C-bus and SMBus applications. It is often used in microcontroller and microprocessor designs to provide additional I/O capabilities without complex wiring or increased pin count on the main device. The chip communicates via the I²C interface, allowing up to eight devices to be connected to the same bus by altering the configurable address pins.
Key features include:
- 16-bit quasi-bidirectional I/O ports split into two 8-bit ports (Port 0 and Port 1).
- Programmable polarity inversion and interrupt outputs for each pin, which can be used for edge or level detection.
- Low standby current consumption for power-sensitive applications.
- Wide supply voltage range, typically operating at 2.3V to 5.5V.
- Can work in both open-drain and push-pull configurations.
Due to its versatility, the PCA9555DB is widely utilized in applications requiring expanded GPIO capabilities, such as in consumer electronics, industrial control systems, and embedded systems.
Key features include:
- 16-bit quasi-bidirectional I/O ports split into two 8-bit ports (Port 0 and Port 1).
- Programmable polarity inversion and interrupt outputs for each pin, which can be used for edge or level detection.
- Low standby current consumption for power-sensitive applications.
- Wide supply voltage range, typically operating at 2.3V to 5.5V.
- Can work in both open-drain and push-pull configurations.
Due to its versatility, the PCA9555DB is widely utilized in applications requiring expanded GPIO capabilities, such as in consumer electronics, industrial control systems, and embedded systems.
Equivalent
Equivalent products to the PCA9555DB, which is an I2C-bus I/O port expander, include:
1. TCA9555 from Texas Instruments
2. MCP23017 from Microchip Technology
3. PCAL9555A from NXP Semiconductors
These alternatives offer similar functionalities such as I2C interfacing and GPIO expansion. Always check the datasheet for specific features and compatibility.
1. TCA9555 from Texas Instruments
2. MCP23017 from Microchip Technology
3. PCAL9555A from NXP Semiconductors
These alternatives offer similar functionalities such as I2C interfacing and GPIO expansion. Always check the datasheet for specific features and compatibility.
Features
The PCA9555DB is a 24-pin CMOS device from NXP Semiconductors that functions as a 16-bit I²C-bus I/O port with interrupt capability. Key features include:
1. I²C Interface: It supports standard (100 kHz), fast (400 kHz), and fast-mode plus (1 MHz) I²C-bus interfaces, allowing for flexible integration in various systems.
2. 16-bit I/O Expansion: Provides 16 general-purpose input/output (GPIO) pins configurable as either inputs or outputs, which can be used for expanding the I/O capability of microcontrollers.
3. Interrupt Output: Features an interrupt output that alerts the microcontroller to state changes, ensuring efficient monitoring without continuous polling.
4. Low Standby Current: Designed for low power consumption, making it suitable for battery-powered applications.
5. Wide Operating Voltage: Operates from 2.3 V to 5.5 V, accommodating a variety of power sources.
6. Address Configurability: The device supports up to 8 programmable I²C addresses, allowing multiple devices on the same bus.
7. Schmitt Trigger Inputs: Enhanced noise immunity and stable operation in noisy environments.
Overall, the PCA9555DB is a versatile solution for applications requiring additional GPIOs with I²C control.
1. I²C Interface: It supports standard (100 kHz), fast (400 kHz), and fast-mode plus (1 MHz) I²C-bus interfaces, allowing for flexible integration in various systems.
2. 16-bit I/O Expansion: Provides 16 general-purpose input/output (GPIO) pins configurable as either inputs or outputs, which can be used for expanding the I/O capability of microcontrollers.
3. Interrupt Output: Features an interrupt output that alerts the microcontroller to state changes, ensuring efficient monitoring without continuous polling.
4. Low Standby Current: Designed for low power consumption, making it suitable for battery-powered applications.
5. Wide Operating Voltage: Operates from 2.3 V to 5.5 V, accommodating a variety of power sources.
6. Address Configurability: The device supports up to 8 programmable I²C addresses, allowing multiple devices on the same bus.
7. Schmitt Trigger Inputs: Enhanced noise immunity and stable operation in noisy environments.
Overall, the PCA9555DB is a versatile solution for applications requiring additional GPIOs with I²C control.
Pinout
The PCA9555DB is a 24-pin device. It is an I²C-bus controlled I/O port expander, which provides 16-bit parallel input/output port expansion. The device is used to increase the number of I/O pins available on a microcontroller or microprocessor.
Here's a concise overview of its functionality:
1. I2C Interface: The PCA9555DB operates over an I2C-bus, allowing it to communicate with a master device through a two-wire serial interface.
2. 16 I/O Pins: It offers 16 programmable I/O pins, divided into two 8-bit ports (P0 and P1). Each pin can be configured as either input or output.
3. Addressable: The device has a programmable slave address, allowing up to eight PCA9555DB devices to be connected to the same I2C bus.
4. Interrupt Output: It features an INT pin for interrupt signaling, which triggers an alert to the microcontroller when there is a change in the input state of any pin.
5. Low Power: The PCA9555DB is designed for low power consumption, making it suitable for battery-powered applications.
This IC is typically used in applications requiring additional GPIOs, such as in sensors, keypads, or LED control systems.
Here's a concise overview of its functionality:
1. I2C Interface: The PCA9555DB operates over an I2C-bus, allowing it to communicate with a master device through a two-wire serial interface.
2. 16 I/O Pins: It offers 16 programmable I/O pins, divided into two 8-bit ports (P0 and P1). Each pin can be configured as either input or output.
3. Addressable: The device has a programmable slave address, allowing up to eight PCA9555DB devices to be connected to the same I2C bus.
4. Interrupt Output: It features an INT pin for interrupt signaling, which triggers an alert to the microcontroller when there is a change in the input state of any pin.
5. Low Power: The PCA9555DB is designed for low power consumption, making it suitable for battery-powered applications.
This IC is typically used in applications requiring additional GPIOs, such as in sensors, keypads, or LED control systems.
Manufacturer
The PCA9555DB is manufactured by NXP Semiconductors. NXP Semiconductors is a global semiconductor company headquartered in Eindhoven, Netherlands. It specializes in the design and manufacture of semiconductors for various applications, including automotive, communication infrastructure, industrial, mobile, smart cities, and smart homes. The company is known for its innovations in secure connectivity solutions, offering products that enable secure connections and infrastructure for a smarter world. NXP’s portfolio includes microcontrollers, RF power, analog and digital signal processors, sensors, and other semiconductor solutions.
Application
The PCA9555DB is an I²C-bus controlled 16-bit I/O expander, often used in applications requiring additional GPIOs. Common areas include:
1. Consumer Electronics: Expands microcontroller GPIOs in audio/visual devices.
2. Industrial Automation: Manages additional sensors or actuators in control systems.
3. Home Appliances: Integrates with microcontrollers for smart appliance interfaces.
4. Telecommunications: Supports signal routing in networking equipment.
5. Automotive Electronics: Interfaces various sensors and switches in vehicle systems.
6. Embedded Systems: Provides extra I/Os for prototyping and development boards.
Its versatility makes it ideal for any application needing multiple remote I/O ports controlled over a simple bus.
1. Consumer Electronics: Expands microcontroller GPIOs in audio/visual devices.
2. Industrial Automation: Manages additional sensors or actuators in control systems.
3. Home Appliances: Integrates with microcontrollers for smart appliance interfaces.
4. Telecommunications: Supports signal routing in networking equipment.
5. Automotive Electronics: Interfaces various sensors and switches in vehicle systems.
6. Embedded Systems: Provides extra I/Os for prototyping and development boards.
Its versatility makes it ideal for any application needing multiple remote I/O ports controlled over a simple bus.
Package
The PCA9555DB is housed in a TSSOP (Thin Shrink Small Outline Package) with 24 pins. The TSSOP-24 is a compact and space-efficient package type suitable for surface mounting on printed circuit boards, commonly used in applications requiring multiple general-purpose I/O expanders.
