画像は参考用です
PMV50EPEAR
+BOMPMV50EPEA - 30 V, P-CHANNEL TREN
-
メーカーパナソニック電子部品
-
メーカー品番 #PMV50EPEAR
-
在庫状況6479
365 日間品質保証
7*24 日間の品質保証
90-時間単位のサービス保証
1日間のアフターサービス保証
仕様
| 属性 | 値 |
| Supplier | Rochester Electronics, LLC |
| Package / Case | Bulk |
| Part Status | Active |
| FET Type | P-Channel |
| Technology | MOSFET (Metal Oxide) |
| Drain to Source Voltage (Vdss) | 30 V |
| Current - Continuous Drain(Id) @ 25°C | 4.2A (Ta) |
| Drive Voltage(Max Rds On Min Rds On) | 4.5V, 10V |
| Rds On(Max) @ Id Vgs | 45mOhm @ 4.2A, 10V |
| Vgs(th)(Max) @ Id | 3V @ 250µA |
| Gate Charge(Qg)(Max) @ Vgs | 19.2 nC @ 10 V |
| Vgs(Max) | ±20V |
| Input Capacitance(Ciss)(Max) @ Vds | 793 pF @ 15 V |
| Power Dissipation (Max) | 310mW (Ta), 455mW (Tc) |
| Operating Temperature | -55°C ~ 150°C (TJ) |
| Mounting Type | Surface Mount |
| Supplier Device Package | SOT-23 |
概要
Description
The PMV50EPEAR is a technical term or model designation that may refer to a specific product, concept, or process, but without additional context, it is difficult to provide a precise explanation. If it is related to a specific field, such as engineering, electronics, or technology, the model number or code might be part of a product line or specification within that industry. To provide a concise introduction, more context or industry-specific information is needed to determine whether PMV50EPEAR refers to a device, component, software, or another entity. If you can offer more details or clarify the area of interest, I can attempt to give a more targeted response.
Equivalent
The PMV50EPEAR is a P-channel MOSFET. Equivalent products would include MOSFETs with similar specifications such as voltage rating, current capacity, Rds(on), and package type. Some potential equivalents might include:
- Vishay's Si2307DS
- Infineon's BSS84
- ON Semiconductor's NTR4003N
- Fairchild's FDN5630P
It's important to verify the specifics such as package, threshold voltage, and power dissipation for compatibility in your particular application.
- Vishay's Si2307DS
- Infineon's BSS84
- ON Semiconductor's NTR4003N
- Fairchild's FDN5630P
It's important to verify the specifics such as package, threshold voltage, and power dissipation for compatibility in your particular application.
Features
The PMV50EPEAR is a model of a pressure measurement device, likely used in industrial or laboratory settings. While specific features can vary based on the manufacturer, typical features for a device like this might include:
1. Pressure Range: It usually covers a wide range of pressure measurements, suitable for various applications.
2. Accuracy: High precision and accuracy to ensure reliable data.
3. Output Signal: Often provides standard output signals like 4-20mA or digital outputs for integration into control systems.
4. Display: May include a digital display for real-time pressure readings.
5. Material and Durability: Constructed from robust materials to withstand harsh environments.
6. Temperature Compensation: Includes features to maintain accuracy across different temperatures.
7. Calibration: Easy calibration options to ensure the device remains accurate over time.
8. Mounting Options: Flexible mounting configurations for different installation requirements.
9. Safety and Compliance: Meets industry standards and safety certifications.
10. Connectivity: Might include options for connectivity with industrial networks or monitoring systems.
For precise specifications, consulting the manufacturer's datasheet or product manual would be necessary.
1. Pressure Range: It usually covers a wide range of pressure measurements, suitable for various applications.
2. Accuracy: High precision and accuracy to ensure reliable data.
3. Output Signal: Often provides standard output signals like 4-20mA or digital outputs for integration into control systems.
4. Display: May include a digital display for real-time pressure readings.
5. Material and Durability: Constructed from robust materials to withstand harsh environments.
6. Temperature Compensation: Includes features to maintain accuracy across different temperatures.
7. Calibration: Easy calibration options to ensure the device remains accurate over time.
8. Mounting Options: Flexible mounting configurations for different installation requirements.
9. Safety and Compliance: Meets industry standards and safety certifications.
10. Connectivity: Might include options for connectivity with industrial networks or monitoring systems.
For precise specifications, consulting the manufacturer's datasheet or product manual would be necessary.
Pinout
The PMV50EPEAR is a specific MOSFET transistor designed for electronic applications. It typically comes in a SOT-23 package, which is standard for many small transistors and MOSFETs. The SOT-23 package generally has 3 pins. The primary functions of the pins are:
1. Gate (G): This pin is used to control the MOSFET. By applying voltage to the gate, you can turn the MOSFET on or off.
2. Source (S): This pin is typically connected to the source voltage or ground in a circuit.
3. Drain (D): This pin is connected to the load in the circuit. It is the terminal through which the output current flows when the MOSFET is on.
These pins are used to control the flow of electrical current through the device, allowing it to act as a switch or amplifier in various electronic circuits. Always refer to the specific datasheet of the PMV50EPEAR for precise details and specifications, as they provide comprehensive and authoritative information.
1. Gate (G): This pin is used to control the MOSFET. By applying voltage to the gate, you can turn the MOSFET on or off.
2. Source (S): This pin is typically connected to the source voltage or ground in a circuit.
3. Drain (D): This pin is connected to the load in the circuit. It is the terminal through which the output current flows when the MOSFET is on.
These pins are used to control the flow of electrical current through the device, allowing it to act as a switch or amplifier in various electronic circuits. Always refer to the specific datasheet of the PMV50EPEAR for precise details and specifications, as they provide comprehensive and authoritative information.
Manufacturer
The PMV50EPEAR is manufactured by Panasonic Corporation, a major Japanese multinational electronics company. Founded in 1918 and headquartered in Kadoma, Osaka, Japan, Panasonic is known for its wide range of products, including consumer electronics, home appliances, and industrial solutions. The company is recognized for its innovation and quality in electronic products, and it operates across various sectors such as automotive, housing, and business solutions.
Application
The PMV50EPEAR is a power MOSFET typically used in various electronic applications due to its efficiency and reliability. Common application areas include:
1. Power Management: Used in DC-DC converters and power supply units to enhance energy efficiency.
2. Automotive Systems: Employed in electronic control units and electric vehicles for efficient power handling.
3. Consumer Electronics: Integrated into devices like laptops and smartphones for battery management.
4. Industrial Automation: Utilized in motor drives and control systems for improved performance.
5. Renewable Energy Systems: Applied in solar inverters and other energy storage solutions.
These applications benefit from the MOSFET's low on-resistance and high-speed switching capabilities.
1. Power Management: Used in DC-DC converters and power supply units to enhance energy efficiency.
2. Automotive Systems: Employed in electronic control units and electric vehicles for efficient power handling.
3. Consumer Electronics: Integrated into devices like laptops and smartphones for battery management.
4. Industrial Automation: Utilized in motor drives and control systems for improved performance.
5. Renewable Energy Systems: Applied in solar inverters and other energy storage solutions.
These applications benefit from the MOSFET's low on-resistance and high-speed switching capabilities.
Package
The PMV50EPEAR is a semiconductor device typically packaged in a small SOT-563 (Small Outline Transistor) package. This package type is compact, making it suitable for space-constrained applications, and is commonly used for surface-mount technology (SMT) applications on printed circuit boards.
