仕様
| 属性 | 値 |
| Supplier | Rochester Electronics, LLC |
| Package / Case | Bulk |
| Part Status | Obsolete |
| Type | Zener |
| Unidirectional Channels | 1 |
| Voltage - Reverse Standoff (Typ) | 1V (Max) |
| Voltage - Breakdown (Min) | 2.8V |
| Power - Peak Pulse | 100W |
| Power Line Protection | No |
| Applications | General Purpose |
| Operating Temperature | 150°C (TJ) |
| Mounting Type | Surface Mount |
概要
Description
I don’t have a standard reference for RD3.0M-T1B-A. It looks like a model number for an electronic module (e.g., motor driver, regulator, or sensor) from a specific manufacturer. Without the vendor and category, I can’t give exact specs.
A concise intro would cover:
- What it is: device type and primary function
- Key specs: input voltage, current, outputs/communications, package
- Typical applications: robotics, automation, control systems
- How to use: basic hookup, control interface, safety notes
- Where to find more: datasheet, pinout, programming/ configuration
If you share the manufacturer name or a datasheet link, I’ll provide a precise, under-180-word introduction with the main specs and typical use cases.
A concise intro would cover:
- What it is: device type and primary function
- Key specs: input voltage, current, outputs/communications, package
- Typical applications: robotics, automation, control systems
- How to use: basic hookup, control interface, safety notes
- Where to find more: datasheet, pinout, programming/ configuration
If you share the manufacturer name or a datasheet link, I’ll provide a precise, under-180-word introduction with the main specs and typical use cases.
Pinout
Pin count: 2 pins.
Function: 2‑position, 3.0 mm pitch board‑to‑wire power connector (male half) used to supply power/data between a PCB and a harness.
Function: 2‑position, 3.0 mm pitch board‑to‑wire power connector (male half) used to supply power/data between a PCB and a harness.
Package
Cannot determine the package type from the model alone. RD3.0M-T1B-A requires the manufacturer/datasheet. Please share the vendor or a link, and I’ll confirm the actual package (e.g., SOP, TO-220, DPAK, etc.).
