画像は参考用です
S25FL064LABMFI010
+BOMIC FLASH 64MBIT SPI/QUAD 8SOIC
-
メーカーオーラセミ社
-
メーカー品番 #S25FL064LABMFI010
-
データシート S25FL064LABMFI010 DataSheet
-
パッケージ 8-SOIC
-
在庫状況3235
365 日間品質保証
7*24 日間の品質保証
90-時間単位のサービス保証
1日間のアフターサービス保証
仕様
| 属性 | 値 |
| Package | Tray |
| Series | FL-L |
| ProductStatus | Active |
| MemoryType | Non-Volatile |
| MemoryFormat | FLASH |
| Technology | FLASH - NOR |
| MemorySize | 64Mb (8M x 8) |
| MemoryInterface | SPI - Quad I/O, QPI |
| ClockFrequency | 108 MHz |
| Voltage-Supply | 2.7V ~ 3.6V |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 8-SOIC (0.209, 5.30mm Width) |
概要
Description
Key features of the S25FL064LABMFI010 include its low power consumption, high-speed performance, and small form factor. It operates over a wide voltage range, typically from 2.7V to 3.6V, making it versatile for various circuit designs. The device supports various read, program, and erase commands, providing flexibility for data management.
Additionally, the S25FL064LABMFI010 offers security features like block protection and secure silicon ID, which help protect data integrity and prevent unauthorized access. It is typically used in environments where reliable and efficient data storage is crucial, offering robustness and endurance for numerous read and write cycles.
Equivalent
1. Micron MT25QL064AB
2. Winbond W25Q64JV
3. Macronix MX25L6406E
4. Adesto/Adesto AT25DF641A
Always verify pin compatibility and electrical characteristics before substitution, as equivalent part numbers can vary slightly in terms of performance or package types.
Features
1. Memory Size: 64 Mbit (8 MByte).
2. Interface: SPI (Serial Peripheral Interface), supporting single, dual, and quad I/O modes.
3. Performance: High-speed operation with clock frequencies up to 133 MHz.
4. Voltage: Operates at a wide voltage range from 2.7V to 3.6V.
5. Architecture: Uniform 256 KB sectors with additional 4 KB sectors.
6. Endurance: 100,000 program/erase cycles per sector.
7. Data Retention: Up to 20 years.
8. Security: Advanced security features, including hardware-based write protection and a 256-bit OTP security register.
9. Package: Available in various compact package options, such as SOIC, WSON, and BGA.
10. Temperature Range: Industrial temperature range from -40°C to +85°C.
These features make it suitable for a wide range of applications, including embedded systems, automotive, and consumer electronics.
Pinout
1. CS# (Chip Select): Enables the device.
2. SCK (Serial Clock): Synchronizes communication between a host and the flash memory.
3. SI (Serial Input)/IO0: Input pin for data during write operations.
4. SO (Serial Output)/IO1: Output pin for data during read operations.
5. WP# (Write Protect)/IO2: Protects against inadvertent write operations to the status register.
6. VSS (Ground): Ground reference for the device.
7. HOLD#/RESET#/IO3: Pauses the device without deselecting; can also be used as a reset or for Quad I/O operations.
8. VCC (Supply Voltage): Power supply for the flash memory.
This configuration supports standard SPI as well as dual and quad I/O modes, offering flexibility for various applications.
Manufacturer
Application
1. Consumer Electronics: Used in devices like TVs, set-top boxes, and cameras for firmware storage.
2. Industrial Systems: Embedded in industrial automation equipment for program and data storage.
3. Automotive Electronics: Utilized in infotainment systems and advanced driver-assistance systems (ADAS).
4. Networking: Employed in routers and switches for configuration and firmware storage.
5. IoT Devices: Supports smart devices with storage for firmware and data logging.
These applications benefit from the chip's fast read/write speeds, low power consumption, and reliability.