画像は参考用です
S25FL064LABNFA010
+BOMIC FLASH 64MBIT SPI/QUAD 8WSON
-
メーカーオーラセミ社
-
メーカー品番 #S25FL064LABNFA010
-
データシート S25FL064LABNFA010 DataSheet
-
パッケージ WFDFN-8
-
在庫状況7605
365 日間品質保証
7*24 日間の品質保証
90-時間単位のサービス保証
1日間のアフターサービス保証
仕様
| 属性 | 値 |
| Package | Tray |
| Series | Automotive, AEC-Q100, FL-L |
| ProductStatus | Active |
| MemoryType | Non-Volatile |
| MemoryFormat | FLASH |
| Technology | FLASH - NOR |
| MemorySize | 64Mb (8M x 8) |
| MemoryInterface | SPI - Quad I/O, QPI |
| ClockFrequency | 108 MHz |
| Voltage-Supply | 2.7V ~ 3.6V |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 8-WFDFN Exposed Pad |
概要
Description
The S25FL064LABNFA010 offers advanced security features, including hardware-based protection and software-controlled block protection, enhancing data integrity and access control. Its performance is further enhanced by features like Quad SPI (QSPI) support, enabling higher data throughput. This makes it suitable for a range of applications, including consumer electronics, automotive systems, and industrial equipment.
The chip is available in various package types to accommodate different design requirements and is designed to withstand a broad range of operational temperatures, which adds to its versatility and reliability in various environments.
Equivalent
1. Winbond W25Q64JV
2. Micron N25Q064A
3. Adesto/AT25SF641
4. Macronix MX25L6406E
5. ISSI IS25LP064A
These chips offer similar storage capacities and interfaces, making them suitable replacements in applications requiring SPI NOR Flash memory. Always verify pin compatibility and electrical specifications before substituting.
Features
1. Memory Architecture: Organized as 8,388,608 bytes with uniform 4 KB sectors and 64 KB blocks, enabling efficient memory management and sector-based erase functions.
2. Interface: Supports Serial Peripheral Interface (SPI) with modes ranging from single, dual, to quad SPI, allowing for flexibility in data transfer rates and configurations.
3. Performance: High-speed operation with a maximum clock frequency up to 133 MHz, supporting fast read operations.
4. Supply Voltage: Operates on a wide voltage range, typically from 2.7V to 3.6V, suitable for various embedded applications.
5. Data Retention and Endurance: Provides typical data retention of 20 years and endurance of 100,000 program/erase cycles per sector, ensuring longevity and reliability.
6. Security: Features security registers and an OTP (One-Time Programmable) area for secure data storage.
7. Temperature Range: Operates effectively in a wide temperature range, typically from -40°C to +85°C, making it suitable for industrial applications.
These features make the S25FL064LABNFA010 a versatile choice for embedded systems requiring reliable and high-performance Flash memory.
Pinout
1. CS# (Chip Select): Enables the device for communication.
2. SO/SIO1 (Serial Output/Serial Data I/O): Data output or I/O depending on the mode.
3. WP#/ACC (Write Protect/Acceleration): Write protect or device acceleration.
4. VSS (Ground): Ground reference for the device.
5. SI/SIO0 (Serial Input/Serial Data I/O): Data input or I/O depending on the mode.
6. SCK (Serial Clock): Clock input for synchronizing communication.
7. HOLD#/RESET#: Pauses communication or resets the device.
8. VCC (Power Supply): Power supply input for the device.
The device supports standard SPI, Dual SPI, and Quad SPI interfaces, providing flexibility for different applications. It is suitable for storing code or data in embedded systems and offers features like fast read, sector erase, and security options.
Manufacturer
Application
1. Consumer Electronics: Firmware storage for devices like TVs and gaming consoles.
2. Industrial Automation: Data logging and firmware in machinery and control systems.
3. Automotive: Used in infotainment systems and ECUs for data storage.
4. Networking Equipment: Firmware and configuration storage in routers and switches.
5. IoT Devices: Data and program storage for smart devices and sensors.
6. Medical Devices: Storage for diagnostic equipment and portable medical devices.
Its high reliability and fast data access make it suitable for these varied applications.