画像は参考用です
S25FL128LAGMFM000
+BOMIC FLASH 128MBIT SPI/QUAD 16SOIC
-
メーカーオーラセミ社
-
メーカー品番 #S25FL128LAGMFM000
-
データシート S25FL128LAGMFM000 DataSheet
-
パッケージ PG-DSO-16
-
在庫状況4796
365 日間品質保証
7*24 日間の品質保証
90-時間単位のサービス保証
1日間のアフターサービス保証
仕様
| 属性 | 値 |
| Package / Case | Tray |
| Series | Automotive, AEC-Q100, FL-L |
| Part Status | Active |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH - NOR |
| Memory Size | 128Mb (16M x 8) |
| Memory Interface | SPI - Quad I/O, QPI |
| Clock Frequency | 133 MHz |
| Voltage - Supply | 2.7V ~ 3.6V |
| Operating Temperature | -40°C ~ 125°C (TA) |
| Mounting Type | Surface Mount |
概要
Description
Key features include:
1. Density and Performance: 128Mb density, suitable for a variety of applications where large storage is needed with fast access times.
2. Interface: Supports SPI, Dual SPI, and Quad SPI, allowing for flexible communication protocols.
3. Security: Includes security features like write protection and password protection to safeguard data.
4. Reliability: Built for endurance with high erase/program cycling capability and data retention.
5. Voltage Range: Operates on a wide voltage range, enhancing compatibility with different systems.
6. Low Power Consumption: Ideal for battery-powered applications due to its efficient power usage.
This device is commonly used in consumer electronics, industrial applications, and systems requiring robust and efficient data storage solutions.
Equivalent
1. Micron's MT25QL128ABA.
2. Winbond's W25Q128JV.
3. Macronix's MX25L12835F.
4. GigaDevice's GD25Q127C.
These alternatives provide similar capacities and interfaces, but specific features like speed and voltage may vary slightly, so it's important to verify compatibility with your application requirements.
Features
1. Interface: SPI (Serial Peripheral Interface) for high-speed data transfer.
2. Performance: Fast read and write speeds, with a typical read time of 100 MHz in single I/O mode.
3. Power Efficiency: Low power consumption with modes for standby and deep power-down to conserve energy.
4. Endurance: High endurance with up to 100,000 program/erase cycles per sector.
5. Data Retention: Ensures data retention for at least 20 years.
6. Security: Features security options like hardware and software protection schemes.
7. Package: Available in various packages to suit different application needs.
8. Operating Temperature: Can operate in a wide temperature range, typically from -40°C to +85°C.
These features make it suitable for applications in automotive, industrial, and consumer electronics where reliability and performance are crucial.
Pinout
1. CS# (Chip Select): Enables the device; active low.
2. SO (Serial Output): Outputs data from the memory.
3. WP# (Write Protect): Protects certain sectors from being written to.
4. VSS (Ground): Ground reference for the device.
5. SI (Serial Input): Inputs commands and data to the memory.
6. SCK (Serial Clock): Provides the clock signal for the SPI bus.
7. HOLD#: Pauses the serial communication; active low.
8. VCC: Supplies power to the device.
The S25FL128L offers features such as fast read performance, sector erase capabilities, and hardware-based write protection. It is suitable for applications requiring reliable non-volatile storage such as firmware storage in embedded systems.
Manufacturer
Application
1. Consumer Electronics: For firmware storage in devices like TVs, set-top boxes, and gaming consoles.
2. Industrial Control: Utilized in PLCs and industrial automation systems for reliable data storage.
3. Automotive Systems: Employed in infotainment and advanced driver-assistance systems (ADAS) for code and data storage.
4. Networking Equipment: Used in routers, switches, and modems for storing configuration and operational data.
5. IoT Devices: Provides non-volatile storage for device firmware and user configurations.
Its reliability and performance make it suitable for applications requiring frequent read/write operations and data integrity.