仕様
| 属性 | 値 |
| Package / Case | Tape & Reel (TR) |
| Series | FL-S |
| Part Status | Active |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH - NOR |
| Memory Size | 512Mb (64M x 8) |
| Memory Interface | SPI - Quad I/O |
| Clock Frequency | 133 MHz |
| Voltage - Supply | 2.7V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
概要
Description
S25FL512SAGBHIC13 is a 512‑Mbit serial NOR flash memory (SPI) from the S25FL512S family (Cypress/Spansion). It is used to store firmware and other non‑volatile data in embedded systems, often as boot or update storage.
Key points:
- Capacity and interface: 64 MB of storage accessible over a serial SPI interface; supports standard SPI and higher‑speed I/O modes (Dual/Quad I/O, and QPI in applicable variants). Uses 4‑byte addressing for addresses beyond 16 MB.
- Memory organization: typically organized into sectors/blocks (e.g., 4 KB sectors; larger blocks); supports page programming (commonly 256 bytes) and block/sector erase.
- Features: fast read, security and protection features (block/region protection, status/config registers), and XIP (execute in place) capabilities in suitable systems.
- Electrical/physical: nominal Vcc ≈ 2.7–3.6 V (variant/grade dependent); packaging and temperature range vary by suffix (HIC13 identifies the exact variant).
- Applications: code storage, boot ROM, firmware updates.
Note: The SAGBHIC13 suffix specifies the exact variant, voltage/temperature range, and packaging; consult the datasheet for exact specs.
Key points:
- Capacity and interface: 64 MB of storage accessible over a serial SPI interface; supports standard SPI and higher‑speed I/O modes (Dual/Quad I/O, and QPI in applicable variants). Uses 4‑byte addressing for addresses beyond 16 MB.
- Memory organization: typically organized into sectors/blocks (e.g., 4 KB sectors; larger blocks); supports page programming (commonly 256 bytes) and block/sector erase.
- Features: fast read, security and protection features (block/region protection, status/config registers), and XIP (execute in place) capabilities in suitable systems.
- Electrical/physical: nominal Vcc ≈ 2.7–3.6 V (variant/grade dependent); packaging and temperature range vary by suffix (HIC13 identifies the exact variant).
- Applications: code storage, boot ROM, firmware updates.
Note: The SAGBHIC13 suffix specifies the exact variant, voltage/temperature range, and packaging; consult the datasheet for exact specs.
Equivalent
Equivalent 512-Mbit SPI NOR flash parts (pin-compatible, 3.0V class) include:
- Macronix MX25L51245G
- Winbond W25Q512JV
- Gigadevice GD25Q512B
- ISSI IS25LP512D
Note: check exact voltage, timing, package, and die revisions for direct drop-in compatibility.
- Macronix MX25L51245G
- Winbond W25Q512JV
- Gigadevice GD25Q512B
- ISSI IS25LP512D
Note: check exact voltage, timing, package, and die revisions for direct drop-in compatibility.
Features
Key features of S25FL512SAGBHIC13 (512-Mbit Serial NOR Flash):
- Density: 512 Mbit Serial NOR Flash.
- Interface: SPI-compatible with Dual/Quad I/O and QPI modes; supports 4-byte addressing for large memory map.
- Performance modes: Fast Read, Dual/Quad I/O Read, and QPI; high-speed clock up to ~104 MHz (I/O clock varies by mode).
- Organization: 256-byte page size; erase topology with 4 KB sectors and 32 KB/64 KB blocks; full-chip erase.
- Endurance/Retention: 100k–1M program/erase cycles; data retention ≥20 years.
- Voltage/Temp: Operation 2.7–3.6 V; industrial temperature version available (-40°C to 85°C).
- Power modes: Deep power-down mode and low-power read modes.
- Security: Sector/block protection, WP# and HOLD# pins, 64-bit Unique ID, status/config registers.
- Packaging: 8-pin package (e.g., SOIC/US8/HBIC variants).
- Applications: Firmware/code storage, boot memory, and other embedded system storage needs.
- Density: 512 Mbit Serial NOR Flash.
- Interface: SPI-compatible with Dual/Quad I/O and QPI modes; supports 4-byte addressing for large memory map.
- Performance modes: Fast Read, Dual/Quad I/O Read, and QPI; high-speed clock up to ~104 MHz (I/O clock varies by mode).
- Organization: 256-byte page size; erase topology with 4 KB sectors and 32 KB/64 KB blocks; full-chip erase.
- Endurance/Retention: 100k–1M program/erase cycles; data retention ≥20 years.
- Voltage/Temp: Operation 2.7–3.6 V; industrial temperature version available (-40°C to 85°C).
- Power modes: Deep power-down mode and low-power read modes.
- Security: Sector/block protection, WP# and HOLD# pins, 64-bit Unique ID, status/config registers.
- Packaging: 8-pin package (e.g., SOIC/US8/HBIC variants).
- Applications: Firmware/code storage, boot memory, and other embedded system storage needs.
Pinout
Pin count: 8 pins (8-pin package, e.g., SOIC-8).
Function: 512 Mbit Serial NOR Flash memory with SPI interface (S25FL512S). Provides standard SPI memory operations (read, write/page program, sector/block erase, etc.). Typical pinout (8-pin): 1 CS#, 2 DO (SO), 3 WP#, 4 GND, 5 DI (SI), 6 CLK, 7 HOLD#, 8 VCC.
Function: 512 Mbit Serial NOR Flash memory with SPI interface (S25FL512S). Provides standard SPI memory operations (read, write/page program, sector/block erase, etc.). Typical pinout (8-pin): 1 CS#, 2 DO (SO), 3 WP#, 4 GND, 5 DI (SI), 6 CLK, 7 HOLD#, 8 VCC.
Manufacturer
Manufacturer: Cypress Semiconductor Corporation (the S25FL512S line originated with Spansion; Cypress is now part of Infineon Technologies AG).
Type of company: A semiconductor company that designs, develops, manufactures, and markets integrated circuits, including serial NOR flash memory for embedded systems.
Type of company: A semiconductor company that designs, develops, manufactures, and markets integrated circuits, including serial NOR flash memory for embedded systems.
Application
Application areas for S25FL512SAGBHIC13 (Serial NOR Flash):
- Code storage and execute-in-place (XIP) for microcontrollers/MPUs; boot loaders
- Firmware storage and updates for embedded systems
- Secure boot, authentication data, and firmware integrity
- Data logging, calibration tables, and configuration storage in industrial, automotive, and IoT equipment
- Embedded networking/gateway devices, routers, set-top boxes, printers, cameras
- Long-term storage for automotive/industrial sensors and other reliable, broad-temperature applications (industrial-grade variants)
- Code storage and execute-in-place (XIP) for microcontrollers/MPUs; boot loaders
- Firmware storage and updates for embedded systems
- Secure boot, authentication data, and firmware integrity
- Data logging, calibration tables, and configuration storage in industrial, automotive, and IoT equipment
- Embedded networking/gateway devices, routers, set-top boxes, printers, cameras
- Long-term storage for automotive/industrial sensors and other reliable, broad-temperature applications (industrial-grade variants)
Package
An 8-pin SOIC (small outline) package.
