S8550

画像は参考用です

S8550

+BOM

TRANS PNP 25V 0.5A SOT23

  • メーカー大うつ病性障害

  • メーカー品番 #S8550

  • パッケージ TO-236-3

  • 在庫状況4044

365 日間品質保証

7*24 日間の品質保証

90-時間単位のサービス保証

1日間のアフターサービス保証

仕様

属性
Package / Case Tape & Reel (TR)
Series SOT-23
Part Status Active
Transistor Type PNP
Current - Collector(Ic)(Max) 500 mA
Voltage - Collector Emitter Breakdown(Max) 25 V
Vce Saturation(Max) @ Ib Ic 600mV @ 50mA, 500mA
Current - Collector Cutoff(Max) 100nA (ICBO)
DC Current Gain(h FE)(Min) @ Ic Vce 120 @ 50mA, 1V
Power - Max 300 mW
Frequency - Transition 150MHz
Operating Temperature -55°C ~ 150°C (TJ)
Mounting Type Surface Mount

概要

Description

The S8550 is a PNP bipolar junction transistor (BJT) commonly used for amplification and switching in electronic circuits.
### Key Features:
- Type: PNP (positive-negative-positive)
- Package: TO-92 (small, through-hole)
- Max Ratings:
- Collector-Base Voltage (VCBO): -30V
- Collector-Emitter Voltage (VCEO): -25V
- Emitter-Base Voltage (VEBO): -5V
- Collector Current (IC): -500mA
- Power Dissipation (Ptot): 625mW
### Applications:
- Low-power switching (relays, LEDs)
- Signal amplification
- Audio circuits
### Complementary NPN Transistor:
- S8050 (similar specs but NPN type)
### Pinout (TO-92):
1. Emitter (E)
2. Base (B)
3. Collector (C)
The S8550 is widely available and cost-effective, making it popular in hobbyist and commercial designs. Always check datasheets for exact specifications.

Equivalent

The S8550 is a PNP transistor. Equivalent products include:
- 2N3906 (general-purpose PNP)
- BC557 (low-power PNP)
- 2SA1015 (similar specs)
- BC327 (higher current rating)
- KTA1266 (higher voltage)
Check pinout and specs for compatibility. Always verify datasheets before substitution.

Pinout

The S8550 is a PNP bipolar junction transistor (BJT) with 3 pins:
1. Emitter (E): Connected to the positive supply in typical circuits.
2. Base (B): Controls the transistor's switching/amplification.
3. Collector (C): Connects to the load, sourcing current in PNP configurations.
Key Functions:
- Amplification: Used in signal amplification.
- Switching: Acts as a switch in electronic circuits.
- Low-power applications: Common in small-signal circuits.
Max Ratings (typical):
- Collector-Base Voltage (VCBO): -30V
- Collector Current (IC): -500mA
- Power Dissipation (Ptot): 625mW
Compact and widely used in audio, switching, and driver circuits.

Manufacturer

The S8550 is a PNP bipolar junction transistor (BJT) commonly manufactured by several semiconductor companies, including ON Semiconductor, STMicroelectronics, and Toshiba.
These companies are well-established global semiconductor manufacturers:
- ON Semiconductor: Focuses on power management, analog, and sensor solutions.
- STMicroelectronics: A major European chipmaker specializing in microcontrollers, power devices, and sensors.
- Toshiba: A Japanese electronics giant known for discrete semiconductors and memory chips.
The S8550 is widely used in amplification and switching applications. Exact specifications may vary slightly by manufacturer. For precise details, check the datasheet from the specific supplier.

Application

The S8550 is a PNP bipolar junction transistor (BJT) commonly used in:
1. Amplification Circuits – Audio and signal amplification.
2. Switching Applications – Relay drivers, LED controls, and power management.
3. Signal Inversion – Logic level shifting.
4. Oscillators & Timers – Pulse generation in circuits.
5. Consumer Electronics – TVs, radios, and small appliances.
Its low power (625mW) and moderate current (500mA) make it suitable for low-voltage applications.

Package

The S8550 transistor is commonly available in the TO-92 package, a small, through-hole plastic package with three leads. It is widely used for general-purpose amplification and switching applications. Some variants may also come in SOT-23 (surface-mount) packages. Always check the datasheet for specific package details.