画像は参考用です
SI2305-TP
+BOMMOSFET P-CH 8V 4.1A SOT23
-
メーカーマイクロコマーシャル株式会社
-
メーカー品番 #SI2305-TP
-
データシート SI2305-TP DataSheet
-
パッケージ SOT-23
-
在庫状況6247
365 日間品質保証
7*24 日間の品質保証
90-時間単位のサービス保証
1日間のアフターサービス保証
仕様
| 属性 | 値 |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| ProductStatus | Active |
| FETType | P-Channel |
| Technology | MOSFET (Metal Oxide) |
| DraintoSourceVoltage(Vdss) | 8 V |
| Current-ContinuousDrain(Id)@25°C | 4.1A (Ta) |
| DriveVoltage(MaxRdsOnMinRdsOn) | 4.5V |
| RdsOn(Max)@IdVgs | 90mOhm @ 2A, 1.8V |
| Vgs(th)(Max)@Id | 900mV @ 250µA |
| GateCharge(Qg)(Max)@Vgs | 15 nC @ 4.5 V |
| Vgs(Max) | ±8V |
| PowerDissipation(Max) | 350mW (Ta) |
| OperatingTemperature | -55°C ~ 150°C (TJ) |
| MountingType | Surface Mount |
| SupplierDevicePackage | SOT-23 |
概要
Description
"Introduction to SI2305-TP" likely refers to a course or module introduction, possibly within a technical or academic program. While specific details can vary, such introductions generally cover the following elements:
1. Course Overview: Provides a brief description of the subject, its goals, and its importance within the broader curriculum.
2. Learning Objectives: Outlines what students are expected to learn or achieve by the end of the course.
3. Prerequisites: Lists any required prior knowledge or courses necessary to enroll.
4. Topics Covered: Highlights key topics or areas that the course will address.
5. Teaching Methods: Describes the instructional approach, including lectures, labs, or projects.
6. Assessment: Provides information on evaluation methods, such as exams, assignments, or projects.
7. Resources: Includes textbooks, online materials, or other resources needed.
8. Instructor Information: Offers contact details and office hours for the course instructor.
9. Schedule: Details the timeline for lectures, exams, and major deadlines.
Without specific information on what "SI2305-TP" exactly pertains to, this general framework should help understand the typical content of such an introduction.
1. Course Overview: Provides a brief description of the subject, its goals, and its importance within the broader curriculum.
2. Learning Objectives: Outlines what students are expected to learn or achieve by the end of the course.
3. Prerequisites: Lists any required prior knowledge or courses necessary to enroll.
4. Topics Covered: Highlights key topics or areas that the course will address.
5. Teaching Methods: Describes the instructional approach, including lectures, labs, or projects.
6. Assessment: Provides information on evaluation methods, such as exams, assignments, or projects.
7. Resources: Includes textbooks, online materials, or other resources needed.
8. Instructor Information: Offers contact details and office hours for the course instructor.
9. Schedule: Details the timeline for lectures, exams, and major deadlines.
Without specific information on what "SI2305-TP" exactly pertains to, this general framework should help understand the typical content of such an introduction.
Equivalent
The SI2305-TP is a P-channel MOSFET. Equivalent products include:
1. 2N7002P (P-channel variant)
2. IRLML6401
3. BSS84
4. PMV16XN
5. AO3401
Make sure to verify the specifications and pin configurations as they can vary slightly between manufacturers. Always check the datasheets to ensure compatibility with your specific application requirements.
1. 2N7002P (P-channel variant)
2. IRLML6401
3. BSS84
4. PMV16XN
5. AO3401
Make sure to verify the specifications and pin configurations as they can vary slightly between manufacturers. Always check the datasheets to ensure compatibility with your specific application requirements.
Features
The SI2305-TP is a MOSFET transistor known for its compact size and efficiency. It is typically used in various electronic devices for switching and amplifying signals. Here are some key features:
1. Type: N-Channel MOSFET.
2. Drain-Source Voltage (Vds): Typically around 20V, indicating the maximum voltage it can handle between the drain and source.
3. Continuous Drain Current (Id): Approximately 2.8A, which is the maximum current it can conduct.
4. Rds(on): Low on-resistance, usually around 0.055 ohms, ensuring minimal power loss and heat generation.
5. Package Type: Available in a small SOT-23 package, making it suitable for space-constrained applications.
6. Applications: Commonly used in DC-DC converters, load switches, and low voltage applications.
7. Temperature Range: Operates effectively across a wide temperature range, typically from -55°C to 150°C.
8. Fast Switching: Capable of high-speed switching, improving efficiency in power applications.
These features make the SI2305-TP suitable for a variety of electronics requiring efficient and reliable switching capabilities.
1. Type: N-Channel MOSFET.
2. Drain-Source Voltage (Vds): Typically around 20V, indicating the maximum voltage it can handle between the drain and source.
3. Continuous Drain Current (Id): Approximately 2.8A, which is the maximum current it can conduct.
4. Rds(on): Low on-resistance, usually around 0.055 ohms, ensuring minimal power loss and heat generation.
5. Package Type: Available in a small SOT-23 package, making it suitable for space-constrained applications.
6. Applications: Commonly used in DC-DC converters, load switches, and low voltage applications.
7. Temperature Range: Operates effectively across a wide temperature range, typically from -55°C to 150°C.
8. Fast Switching: Capable of high-speed switching, improving efficiency in power applications.
These features make the SI2305-TP suitable for a variety of electronics requiring efficient and reliable switching capabilities.
Pinout
The SI2305-TP is a P-channel MOSFET commonly used in electronic circuits for switching and amplification applications. It typically comes in a SOT-23 package. The pin count for the SI2305-TP is three. The functions of these pins are as follows:
1. Gate (G): This pin is used to control the MOSFET by applying voltage to turn the device on or off. The gate voltage determines whether the MOSFET is in the conducting or non-conducting state.
2. Source (S): This pin is the source of the charge carriers (holes, in the case of a P-channel MOSFET). It is usually connected to the higher potential in the circuit.
3. Drain (D): This pin is where the charge carriers leave the MOSFET. The drain is typically connected to the lower potential in the circuit.
The SI2305-TP is used for a wide range of applications due to its small size, efficient switching capabilities, and low on-resistance.
1. Gate (G): This pin is used to control the MOSFET by applying voltage to turn the device on or off. The gate voltage determines whether the MOSFET is in the conducting or non-conducting state.
2. Source (S): This pin is the source of the charge carriers (holes, in the case of a P-channel MOSFET). It is usually connected to the higher potential in the circuit.
3. Drain (D): This pin is where the charge carriers leave the MOSFET. The drain is typically connected to the lower potential in the circuit.
The SI2305-TP is used for a wide range of applications due to its small size, efficient switching capabilities, and low on-resistance.
Manufacturer
The SI2305-TP is manufactured by Vishay Intertechnology, Inc. Vishay is a global company known for its production of discrete semiconductors and passive electronic components. Founded in 1962, the company is headquartered in Malvern, Pennsylvania, USA. It serves a wide range of industries, including automotive, industrial, computing, consumer, telecommunications, military, aerospace, and medical markets. Vishay's product portfolio includes resistors, inductors, capacitors, diodes, and transistors, among other components.
Application
SI2305-TP is a high-performance thermoplastic polymer used in various applications due to its excellent mechanical properties, thermal stability, and chemical resistance. Common application areas include aerospace components, where it serves as a lightweight yet durable material for structural parts. It's also used in the automotive industry for parts requiring high strength and heat resistance. Additionally, SI2305-TP is employed in the electronics sector for insulating components and housing materials, thanks to its electrical insulation properties. In the medical field, it can be used for manufacturing devices and equipment that need to withstand sterilization processes. Its versatility makes it suitable for any application requiring robust performance under demanding conditions.
Package
The SI2305-TP is a P-channel MOSFET packaged in a SOT-23 form factor. SOT-23 is a small outline transistor package commonly used for surface-mount devices, facilitating compact and efficient circuit design.
