仕様
| 属性 | 値 |
| Supplier | Skyworks Solutions Inc. |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| ProductStatus | Active |
| RFType | WLAN |
| Topology | Reflective |
| Circuit | SP3T |
| FrequencyRange | 100MHz ~ 6GHz |
| Isolation | 30dB |
| InsertionLoss | 0.45dB |
| TestFrequency | 2.5GHz |
| IIP3 | 70dBm |
| Impedance | 50Ohm |
| Voltage-Supply | 2.5V ~ 4.8V |
| OperatingTemperature | -40°C ~ 105°C |
| Package/Case | 12-UFQFN Exposed Pad |
概要
Description
SKY13588-460LF is Skyworks’ SPDT RF switch device used to route RF signals in wireless front-ends. It provides a single common port and two output paths, allowing switching between TX/RX or antenna paths in mobile/LTE/5G, Wi‑Fi/Bluetooth, GNSS, and other RF transceivers. The part is packaged lead-free (LF) in a compact form factor and designed for sub-6 GHz applications, with 50 Ω matched ports and characteristics suitable for low insertion loss, high isolation, and fast switching with a simple bias/control interface. The “460” indicates the specific variant/frequency band family, while “LF” denotes lead-free packaging. For exact electrical specs (frequency range, insertion loss, isolation, control voltages, power handling, and pinout), refer to the SKY13588-460LF datasheet and reference designs.
Equivalent
Direct one-to-one equivalents don’t exist; any substitute would be another RF switch/front-end module with similar specs. To cross-reference, compare: frequency range, insertion loss, isolation, number of ports, bias/control voltage, and package. Potential sources: Qorvo, Analog Devices, Broadcom (Avago), Murata, and other RF-switch vendors. Use Digi-Key/Mouser to filter “RF switch” in the same band and check datasheets for cross-reference or recommended replacements.
Pinout
- Pin count: 6 pins
- Function: SPDT RF switch (common port with two throws: RF1 and RF2) for 4.6 GHz; controlled by bias/control pins to route RF between RF1 and RF2. Ground is provided via a dedicated pin.
- Function: SPDT RF switch (common port with two throws: RF1 and RF2) for 4.6 GHz; controlled by bias/control pins to route RF between RF1 and RF2. Ground is provided via a dedicated pin.
Manufacturer
- Manufacturer: Skyworks Solutions, Inc.
- What kind of company: A US fabless semiconductor company that designs and markets RF front-end ICs and modules for wireless communications (mobile, IoT, etc.).
- What kind of company: A US fabless semiconductor company that designs and markets RF front-end ICs and modules for wireless communications (mobile, IoT, etc.).
Application
- Mobile/handset RF front-ends (LTE/5G, multi-band)
- Antenna switching and diversity networks
- Cellular base stations and distributed antenna systems (DAS)
- Wireless infrastructure gear (Wi‑Fi, GNSS, Bluetooth multi-band devices)
- RF test and measurement setups and lab routing networks
Note: SKY13588-460LF is a broadband RF switch used to route signal paths in multi-band front-end modules and related wireless equipment.
- Antenna switching and diversity networks
- Cellular base stations and distributed antenna systems (DAS)
- Wireless infrastructure gear (Wi‑Fi, GNSS, Bluetooth multi-band devices)
- RF test and measurement setups and lab routing networks
Note: SKY13588-460LF is a broadband RF switch used to route signal paths in multi-band front-end modules and related wireless equipment.
Package
Lead-free 6-pin DFN (2 × 3 mm) package.
