画像は参考用です
SN65MLVD202ADR
+BOMIC TRANSCEIVER FULL 1/1 14SOIC
-
メーカーSTマイクロエレクトロニクス
-
メーカー品番 #SN65MLVD202ADR
-
データシート SN65MLVD202ADR DataSheet
-
在庫状況6799
365 日間品質保証
7*24 日間の品質保証
90-時間単位のサービス保証
1日間のアフターサービス保証
仕様
| 属性 | 値 |
| Part Status | Active |
| Type | Transceiver |
| Protocol | LVDS, Multipoint |
| Number of Drivers/Receivers | 1/1 |
| Duplex | Full |
| Receiver Hysteresis | 25 mV |
| Data Rate | 100Mbps |
| Voltage - Supply | 3V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154", 3.90mm Width) |
| Supplier Device Package | 14-SOIC |
| Base Product Number | 65MLVD202 |
概要
Description
The SN65MLVD202ADR is a low-voltage differential signaling (LVDS) transceiver designed by Texas Instruments. It is intended for high-speed data transmission over short distances, typically up to a few meters. The device supports multi-drop and point-to-point configurations, making it suitable for applications such as industrial automation, telecommunications, and data communication systems.
Operating at a supply voltage of 3.3V, the SN65MLVD202ADR offers data rates up to 200 Mbps, allowing for efficient high-speed data transfer. The device features a wide common-mode range and robust electromagnetic compatibility, which enhances its performance in electrically noisy environments.
Key features include low power consumption, hot-plugging capability, and fail-safe logic that ensures a known output state when the input is open or shorted. The SN65MLVD202ADR comes in an 8-pin SOIC package, making it easy to integrate into various circuit designs.
Overall, the SN65MLVD202ADR is a reliable choice for applications requiring high-speed, low-power, and noise-resistant data communication.
Operating at a supply voltage of 3.3V, the SN65MLVD202ADR offers data rates up to 200 Mbps, allowing for efficient high-speed data transfer. The device features a wide common-mode range and robust electromagnetic compatibility, which enhances its performance in electrically noisy environments.
Key features include low power consumption, hot-plugging capability, and fail-safe logic that ensures a known output state when the input is open or shorted. The SN65MLVD202ADR comes in an 8-pin SOIC package, making it easy to integrate into various circuit designs.
Overall, the SN65MLVD202ADR is a reliable choice for applications requiring high-speed, low-power, and noise-resistant data communication.
Equivalent
The SN65MLVD202ADR is a M-LVDS driver/receiver from Texas Instruments. Equivalent products might include differential line drivers/receivers with similar specifications from manufacturers like Analog Devices, Maxim Integrated, or ON Semiconductor. Specifically, you can look at the DS91M047 from ON Semiconductor or the ADI's ADM4168E. It's important to verify the specifications, such as data rate, power supply, and package type, to ensure compatibility.
Features
The SN65MLVD202ADR is a low-voltage differential signaling (LVDS) transceiver designed for high-speed data transmission. Key features include:
1. Data Rate: Supports data rates up to 100 Mbps, making it suitable for high-speed communication applications.
2. Low Power Consumption: Offers efficient power usage, ideal for battery-operated and portable devices.
3. Differential Signaling: Utilizes LVDS technology, which provides high noise immunity and low electromagnetic interference (EMI).
4. Wide Supply Voltage Range: Operates on a supply voltage ranging from 3.0 V to 3.6 V.
5. Extended Temperature Range: Functions reliably over a temperature range of -40°C to 85°C, suitable for industrial applications.
6. Compact Package: Comes in a small surface-mount package, promoting space-saving designs.
7. Integrated Termination: Includes integrated termination resistors to simplify board design and reduce component count.
8. Hot-Swap Capability: Supports hot swapping, which allows for replacement or connection of components without shutting down the system.
These features make the SN65MLVD202ADR ideal for applications in telecommunications, data communications, and other systems requiring reliable and efficient data transmission.
1. Data Rate: Supports data rates up to 100 Mbps, making it suitable for high-speed communication applications.
2. Low Power Consumption: Offers efficient power usage, ideal for battery-operated and portable devices.
3. Differential Signaling: Utilizes LVDS technology, which provides high noise immunity and low electromagnetic interference (EMI).
4. Wide Supply Voltage Range: Operates on a supply voltage ranging from 3.0 V to 3.6 V.
5. Extended Temperature Range: Functions reliably over a temperature range of -40°C to 85°C, suitable for industrial applications.
6. Compact Package: Comes in a small surface-mount package, promoting space-saving designs.
7. Integrated Termination: Includes integrated termination resistors to simplify board design and reduce component count.
8. Hot-Swap Capability: Supports hot swapping, which allows for replacement or connection of components without shutting down the system.
These features make the SN65MLVD202ADR ideal for applications in telecommunications, data communications, and other systems requiring reliable and efficient data transmission.
Pinout
The SN65MLVD202ADR is a differential line driver and receiver designed for multipoint, low-voltage differential signaling (M-LVDS) applications. It is commonly used in high-speed data transmission systems. The device is manufactured by Texas Instruments.
This integrated circuit comes in an 8-pin SOIC (Small Outline Integrated Circuit) package. The pin functions are as follows:
1. A - Non-inverting differential data input/output.
2. B - Inverting differential data input/output.
3. GND - Ground.
4. NC - No connect (not internally connected).
5. VCC - Supply voltage.
6. DE - Driver enable (active high).
7. RE - Receiver enable (active low).
8. R - Receiver output.
The SN65MLVD202ADR is used for converting TTL/CMOS levels to differential M-LVDS signals and vice versa, facilitating reliable data communication in electrically noisy environments.
This integrated circuit comes in an 8-pin SOIC (Small Outline Integrated Circuit) package. The pin functions are as follows:
1. A - Non-inverting differential data input/output.
2. B - Inverting differential data input/output.
3. GND - Ground.
4. NC - No connect (not internally connected).
5. VCC - Supply voltage.
6. DE - Driver enable (active high).
7. RE - Receiver enable (active low).
8. R - Receiver output.
The SN65MLVD202ADR is used for converting TTL/CMOS levels to differential M-LVDS signals and vice versa, facilitating reliable data communication in electrically noisy environments.
Manufacturer
The SN65MLVD202ADR is manufactured by Texas Instruments (TI). Texas Instruments is a global technology company that designs and manufactures semiconductors and various integrated circuits, which are used in a variety of electronic devices. TI is known for its innovation in the field of analog technology, embedded processing, and digital signal processing. The company serves a broad range of industries, including automotive, industrial, personal electronics, communications equipment, and enterprise systems. Their products are critical components in applications such as wireless communications, automotive systems, and industrial automation.
Application
The SN65MLVD202ADR is a low-voltage differential signaling (LVDS) transceiver designed for high-speed data communication. Its application areas include:
1. Data Communication Systems: Utilized for reliable high-speed data transfer in networking equipment.
2. Industrial Automation: Supports communication in automated machinery and control systems.
3. Telecommunications: Facilitates signal transmission in telecom infrastructure.
4. Medical Equipment: Enables data connectivity in diagnostic and monitoring devices.
5. Consumer Electronics: Used in devices requiring efficient data communication.
6. Computing: Assists in high-speed data transfer within computer systems.
Its features, like low power consumption and high noise immunity, make it suitable for applications requiring efficient data transmission over longer distances.
1. Data Communication Systems: Utilized for reliable high-speed data transfer in networking equipment.
2. Industrial Automation: Supports communication in automated machinery and control systems.
3. Telecommunications: Facilitates signal transmission in telecom infrastructure.
4. Medical Equipment: Enables data connectivity in diagnostic and monitoring devices.
5. Consumer Electronics: Used in devices requiring efficient data communication.
6. Computing: Assists in high-speed data transfer within computer systems.
Its features, like low power consumption and high noise immunity, make it suitable for applications requiring efficient data transmission over longer distances.
Package
The SN65MLVD202ADR is a low-voltage differential signaling (LVDS) line driver and receiver from Texas Instruments. It comes in an SOIC (Small Outline Integrated Circuit) package with 8 pins. The "DR" suffix specifically indicates it is a plastic, small-outline package with a narrow body and gull wings.
