画像は参考用です
SST49LF008A-33-4C-WHE
+BOMIC FLASH 8MBIT PAR 33MHZ 32TSOP
-
メーカーマイクロチップ・テクノロジー
-
メーカー品番 #SST49LF008A-33-4C-WHE
-
在庫状況9976
365 日間品質保証
7*24 日間の品質保証
90-時間単位のサービス保証
1日間のアフターサービス保証
仕様
| 属性 | 値 |
| Series | SST49 |
| Part Status | Obsolete |
| Digi Key Programmable | Not Verified |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH |
| Memory Size | 8Mbit |
| Memory Organization | 1M x 8 |
| Memory Interface | Parallel |
| Write Cycle Time - Word, Page | 20µs |
| Voltage - Supply | 3V ~ 3.6V |
| Operating Temperature | 0°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
| Package / Case | 32-TFSOP (0.488", 12.40mm Width) |
| Supplier Device Package | 32-TSOP |
| Base Product Number | SST49LF008 |
| Clock Frequency | 33 MHz |
| Access Time | 120 ns |
概要
Description
Key features include support for LPC bus architecture, a small 32-pin PLCC (Plastic Leaded Chip Carrier) package, and a wide operating temperature range suitable for commercial applications. It is known for its fast read and write cycle times, low power consumption, and reliability, making it suitable for embedded systems where efficient storage and retrieval of code or data are critical.
The "4C" indicates the commercial temperature range, while "WHE" specifies the packaging type. These chips are often used in applications needing re-programmable storage for code updates, such as firmware updates in computing and networking devices.
Equivalent
Features
Key features include a fast read access time, typically 90 ns, and support for In-Application Programming (IAP) via a single 3.3V power supply, allowing for updates without removing the chip from the circuit. The device also includes hardware block protection for data integrity and a 4KB uniform sector architecture.
Additionally, the SST49LF008A-33-4C-WHE incorporates endurance of 100,000 write/erase cycles per sector and data retention of over 100 years, ensuring reliable performance over an extended period. Its compact WHE package design further enhances its suitability for space-constrained applications.
Pinout
The device comes in a PLCC (Plastic Leaded Chip Carrier) package with 32 pins. The pin configuration includes:
- Address and Data I/O pins for interfacing with the system.
- Control pins such as Chip Enable (CE), Output Enable (OE), and Write Enable (WE) for managing read/write operations.
- LPC interface pins, including LCLK (Clock), LFRAME# (Frame), LAD[3:0] (LPC Address/Data), and RST# (Reset).
- Power (Vdd) and Ground (Vss) pins.
These pins aid in the programming, erasure, and reading of the flash memory, as well as integration with microcontrollers and other digital systems.
For specific pin functions and detailed operational modes, it is crucial to refer to the device's datasheet.