画像は参考用です
STD2N105K5
+BOMMOSFET N-CH 1050V 1.5A DPAK
-
メーカーRFE/フューゼテック
-
メーカー品番 #STD2N105K5
-
在庫状況8402
365 日間品質保証
7*24 日間の品質保証
90-時間単位のサービス保証
1日間のアフターサービス保証
仕様
| 属性 | 値 |
| Series | MDmesh™ K5 |
| PartStatus | Active |
| FETType | N-Channel |
| Technology | MOSFET (Metal Oxide) |
| DraintoSourceVoltage(Vdss) | 1050 V |
| Current-ContinuousDrain(Id)@25°C | 1.5A (Tc) |
| DriveVoltage(MaxRdsOn,MinRdsOn) | 10V |
| RdsOn(Max)@Id,Vgs | 8Ohm @ 750mA, 10V |
| Vgs(th)(Max)@Id | 5V @ 100µA |
| GateCharge(Qg)(Max)@Vgs | 10 nC @ 10 V |
| Vgs(Max) | ±30V |
| InputCapacitance(Ciss)(Max)@Vds | 115 pF @ 100 V |
| PowerDissipation(Max) | 60W (Tc) |
| OperatingTemperature | -55°C ~ 150°C (TJ) |
| MountingType | Surface Mount |
| SupplierDevicePackage | DPAK |
| Package/Case | TO-252-3, DPAK (2 Leads + Tab), SC-63 |
| BaseProductNumber | STD2N105 |
概要
Description
The STD2N105K5 is an N-channel MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor) commonly used in power electronics for switching applications. This component is designed to handle high voltage and current, making it suitable for various applications, including power supplies, motor drives, and DC-DC converters.
Key specifications typically include a maximum drain-source voltage (Vds) of around 100V, continuous drain current (Id) of approximately 30A, and a low on-resistance (Rds(on)), which enhances its efficiency by minimizing power loss during operation.
The MOSFET features a gate voltage (Vgs) threshold that allows for easy control with standard logic-level signals. Its packaging, often available in TO-220 or DPAK configurations, enables effective heat dissipation, which is crucial for maintaining performance in high-power applications.
Overall, the STD2N105K5 is valued for its reliability, efficiency, and versatility in various electronic circuits. Always refer to the manufacturer's datasheet for detailed specifications and ratings.
Key specifications typically include a maximum drain-source voltage (Vds) of around 100V, continuous drain current (Id) of approximately 30A, and a low on-resistance (Rds(on)), which enhances its efficiency by minimizing power loss during operation.
The MOSFET features a gate voltage (Vgs) threshold that allows for easy control with standard logic-level signals. Its packaging, often available in TO-220 or DPAK configurations, enables effective heat dissipation, which is crucial for maintaining performance in high-power applications.
Overall, the STD2N105K5 is valued for its reliability, efficiency, and versatility in various electronic circuits. Always refer to the manufacturer's datasheet for detailed specifications and ratings.
Equivalent
The STD2N105K5 is a power MOSFET. Equivalent products include:
1. IRF540
2. STP16NF06
3. FQP30N06L
4. BSS138
5. STP24NF06
Always verify specifications such as voltage, current ratings, and Rds(on) to ensure compatibility for your specific application.
1. IRF540
2. STP16NF06
3. FQP30N06L
4. BSS138
5. STP24NF06
Always verify specifications such as voltage, current ratings, and Rds(on) to ensure compatibility for your specific application.
Features
The STD2N105K5 is an N-channel MOSFET, designed for various power applications. Key features include:
1. Voltage Rating: It typically has a maximum drain-source voltage (V_DS) of 100V, making it suitable for medium voltage applications.
2. Current Rating: It can handle continuous drain current (I_D) up to 2A, which provides good performance in switching circuits.
3. Low On-Resistance (R_DS(on)): This results in lower power losses and increased efficiency, especially in high-speed switching applications.
4. Fast Switching Speed: Ideal for applications that require quick response times, such as power supplies and motor drivers.
5. Thermal Management: It comes with a high maximum junction temperature, allowing for robust performance under thermal stress.
6. Package Type: Typically housed in a TO-220 or similar package for easier heat dissipation and mounting.
These features make the STD2N105K5 suitable for use in power management, DC-DC converters, and general switching applications. Always consult the datasheet for detailed specifications.
1. Voltage Rating: It typically has a maximum drain-source voltage (V_DS) of 100V, making it suitable for medium voltage applications.
2. Current Rating: It can handle continuous drain current (I_D) up to 2A, which provides good performance in switching circuits.
3. Low On-Resistance (R_DS(on)): This results in lower power losses and increased efficiency, especially in high-speed switching applications.
4. Fast Switching Speed: Ideal for applications that require quick response times, such as power supplies and motor drivers.
5. Thermal Management: It comes with a high maximum junction temperature, allowing for robust performance under thermal stress.
6. Package Type: Typically housed in a TO-220 or similar package for easier heat dissipation and mounting.
These features make the STD2N105K5 suitable for use in power management, DC-DC converters, and general switching applications. Always consult the datasheet for detailed specifications.
Pinout
The STD2N105K5 is an N-channel power MOSFET typically used in switching applications. It features a TO-220 package with three pins.
Pin Count and Functions:
1. Gate (G): This pin controls the MOSFET operation by applying voltage to turn it on or off.
2. Drain (D): This pin connects to the load and is where the current flows out of the MOSFET.
3. Source (S): This pin is connected to the ground or negative supply voltage, allowing current to flow into the MOSFET from the load.
These connections enable the device to switch and amplify electrical signals efficiently. Always consult the specific datasheet for detailed electrical characteristics and ratings.
Pin Count and Functions:
1. Gate (G): This pin controls the MOSFET operation by applying voltage to turn it on or off.
2. Drain (D): This pin connects to the load and is where the current flows out of the MOSFET.
3. Source (S): This pin is connected to the ground or negative supply voltage, allowing current to flow into the MOSFET from the load.
These connections enable the device to switch and amplify electrical signals efficiently. Always consult the specific datasheet for detailed electrical characteristics and ratings.
Manufacturer
The STD2N105K5 is a power MOSFET manufactured by STMicroelectronics. STMicroelectronics is a multinational electronics and semiconductor manufacturer headquartered in Geneva, Switzerland. Founded in 1987, the company operates in various sectors, including automotive, industrial, personal electronics, and communication equipment.
STMicroelectronics is known for producing a wide range of semiconductor devices, including microcontrollers, sensors, analog ICs, and power management solutions. They focus on innovation and sustainability, aiming to develop technologies that enhance performance while reducing environmental impact. With a global presence and a strong emphasis on research and development, STMicroelectronics is a key player in the semiconductor industry, serving customers in diverse markets around the world.
STMicroelectronics is known for producing a wide range of semiconductor devices, including microcontrollers, sensors, analog ICs, and power management solutions. They focus on innovation and sustainability, aiming to develop technologies that enhance performance while reducing environmental impact. With a global presence and a strong emphasis on research and development, STMicroelectronics is a key player in the semiconductor industry, serving customers in diverse markets around the world.
Application
The STD2N105K5 is a high-performance N-channel MOSFET primarily used in power electronics applications. Its application areas include:
1. Switching Power Supplies: Used for efficient power conversion in DC-DC converters and inverters.
2. Motor Control: Employed in driving motors for various industrial and automotive applications.
3. Power Management Circuits: Utilized in voltage regulation and load switching applications.
4. Audio Amplifiers: Implemented in audio amplification systems for better efficiency.
5. LED Drivers: Used in circuits that require precise control of LED lighting.
Its low on-resistance and fast switching capabilities make it suitable for these applications.
1. Switching Power Supplies: Used for efficient power conversion in DC-DC converters and inverters.
2. Motor Control: Employed in driving motors for various industrial and automotive applications.
3. Power Management Circuits: Utilized in voltage regulation and load switching applications.
4. Audio Amplifiers: Implemented in audio amplification systems for better efficiency.
5. LED Drivers: Used in circuits that require precise control of LED lighting.
Its low on-resistance and fast switching capabilities make it suitable for these applications.
Package
The STD2N105K5 is typically packaged in a TO-220 format, which is a standard package type for power transistors. This package provides good thermal performance and is suitable for various electronic applications.
