画像は参考用です
TDA7056AT
+BOM-
メーカーJLCPCBコンポーネント
-
メーカー品番 #TDA7056AT
-
在庫状況14013
365 日間品質保証
7*24 日間の品質保証
90-時間単位のサービス保証
1日間のアフターサービス保証
仕様
| 属性 | 値 |
| Manufacturer | JLCPCB Assembly |
| Package | SOP-20 |
概要
Description
The TDA7056AT is a mono BTL (Bridge-Tied Load) audio amplifier from NXP Semiconductors, designed for low-voltage applications. Key features:
- Output Power: 1.4W (typical) into 8Ω at 6V.
- Operating Voltage: 3V to 18V, making it suitable for battery-powered devices.
- BTL Configuration: Eliminates the need for an output capacitor, saving space and cost.
- Low Standby Current: ~50nA, enhancing energy efficiency.
- Thermal Protection: Built-in safeguards against overheating.
- Minimal External Components: Requires few external parts, simplifying design.
Commonly used in portable radios, TVs, and small audio systems, the TDA7056AT is housed in an 8-pin DIP or SO package. Its fixed gain (40dB) reduces design complexity, while its robust performance suits cost-sensitive, compact applications.
For detailed specs, refer to the datasheet.
- Output Power: 1.4W (typical) into 8Ω at 6V.
- Operating Voltage: 3V to 18V, making it suitable for battery-powered devices.
- BTL Configuration: Eliminates the need for an output capacitor, saving space and cost.
- Low Standby Current: ~50nA, enhancing energy efficiency.
- Thermal Protection: Built-in safeguards against overheating.
- Minimal External Components: Requires few external parts, simplifying design.
Commonly used in portable radios, TVs, and small audio systems, the TDA7056AT is housed in an 8-pin DIP or SO package. Its fixed gain (40dB) reduces design complexity, while its robust performance suits cost-sensitive, compact applications.
For detailed specs, refer to the datasheet.
Equivalent
The TDA7056AT is a 1W mono audio amplifier. Equivalent or similar chips include:
- TDA7052A (1W mono)
- LM386 (low-power audio amp, requires external components)
- TDA7050 (1W mono, similar specs)
- KA2201 (1W mono alternative)
These offer comparable power output (~1W) and basic functionality. Check datasheets for exact pin compatibility and circuit adjustments.
- TDA7052A (1W mono)
- LM386 (low-power audio amp, requires external components)
- TDA7050 (1W mono, similar specs)
- KA2201 (1W mono alternative)
These offer comparable power output (~1W) and basic functionality. Check datasheets for exact pin compatibility and circuit adjustments.
Features
The TDA7056AT is a mono BTL (Bridge-Tied Load) audio amplifier with the following key features:
- Output Power: 1.4W (typical) into 8Ω at 6V supply.
- Operating Voltage: 3V to 18V (wide range).
- Low Standby Current: ~4µA (power-saving).
- No External Components Needed: Minimal external parts (no bootstrap capacitors).
- Thermal Protection: Built-in against overheating.
- Short-Circuit Proof: Robust against output shorts.
- Gain Fixed at 40dB: No need for gain-setting resistors.
- Mute Function: Logic-controlled (active low).
- Small Package: SO8 (SMD) for compact designs.
Ideal for portable audio devices, toys, and low-power applications.
- Output Power: 1.4W (typical) into 8Ω at 6V supply.
- Operating Voltage: 3V to 18V (wide range).
- Low Standby Current: ~4µA (power-saving).
- No External Components Needed: Minimal external parts (no bootstrap capacitors).
- Thermal Protection: Built-in against overheating.
- Short-Circuit Proof: Robust against output shorts.
- Gain Fixed at 40dB: No need for gain-setting resistors.
- Mute Function: Logic-controlled (active low).
- Small Package: SO8 (SMD) for compact designs.
Ideal for portable audio devices, toys, and low-power applications.
Pinout
The TDA7056AT is a mono BTL (Bridge-Tied Load) audio amplifier IC with 9 pins in a SIL (Single In-Line) package.
### Key Functions:
1. Pin 1 (Input): Audio signal input.
2. Pin 2 (GND): Ground reference.
3. Pin 3 (NC): Not connected.
4. Pin 4 (Supply Voltage, VP): Power supply (4.5V–18V).
5. Pin 5 (Output+): Positive speaker output.
6. Pin 6 (GND): Ground.
7. Pin 7 (Output-): Negative speaker output.
8. Pin 8 (Standby/Mute): Controls mute/standby (low = mute).
9. Pin 9 (Gain Control): Adjusts gain via external resistor.
### Features:
- 1W output power (8Ω, 9V).
- Low external component count.
- Thermal & short-circuit protection.
Used in portable audio devices, TVs, and radios for compact mono amplification.
### Key Functions:
1. Pin 1 (Input): Audio signal input.
2. Pin 2 (GND): Ground reference.
3. Pin 3 (NC): Not connected.
4. Pin 4 (Supply Voltage, VP): Power supply (4.5V–18V).
5. Pin 5 (Output+): Positive speaker output.
6. Pin 6 (GND): Ground.
7. Pin 7 (Output-): Negative speaker output.
8. Pin 8 (Standby/Mute): Controls mute/standby (low = mute).
9. Pin 9 (Gain Control): Adjusts gain via external resistor.
### Features:
- 1W output power (8Ω, 9V).
- Low external component count.
- Thermal & short-circuit protection.
Used in portable audio devices, TVs, and radios for compact mono amplification.
Manufacturer
The TDA7056AT is manufactured by NXP Semiconductors, a Dutch company formerly known as Philips Semiconductors. NXP is a global leader in automotive, industrial, and IoT semiconductor solutions, known for its high-performance mixed-signal and analog ICs. The TDA7056AT is a low-voltage stereo audio power amplifier, reflecting NXP's expertise in audio and power management technologies.
NXP was spun off from Philips in 2006 and is headquartered in Eindhoven, Netherlands. It serves markets like automotive, secure identification, and wireless infrastructure.
NXP was spun off from Philips in 2006 and is headquartered in Eindhoven, Netherlands. It serves markets like automotive, secure identification, and wireless infrastructure.
Package
The TDA7056AT is a mono BTL (Bridge-Tied Load) audio amplifier IC from NXP. It comes in an SO8 (SMD) package with 8 pins. The package type is plastic small outline (SO), suitable for surface-mount applications. It operates on a low voltage supply (1.6–6V) and is designed for portable audio devices.
