画像は参考用です
TLE2062ACDR
+BOMIC OPAMP JFET 2 CIRCUIT 8SOIC
-
メーカーSTマイクロエレクトロニクス
-
メーカー品番 #TLE2062ACDR
-
在庫状況4735
365 日間品質保証
7*24 日間の品質保証
90-時間単位のサービス保証
1日間のアフターサービス保証
仕様
| 属性 | 値 |
| Supplier | Texas Instruments |
| Package | Tape & Reel (TR),Cut Tape (CT) |
| ProductStatus | Active |
| AmplifierType | J-FET |
| NumberofCircuits | 2 |
| SlewRate | 3.4V/µs |
| GainBandwidthProduct | 2 MHz |
| Current-InputBias | 4 pA |
| Voltage-InputOffset | 800 µV |
| Current-Supply | 625µA (x2 Channels) |
| Current-Output/Channel | 80 mA |
| Voltage-SupplySpan(Min) | 7 V |
| Voltage-SupplySpan(Max) | 36 V |
| OperatingTemperature | 0°C ~ 70°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 8-SOIC (0.154, 3.90mm Width) |
概要
Description
Introduction to TLE2062ACDR
- What it is: A Texas Instruments integrated circuit, typically a dual operational amplifier used for precision signal amplification in analog front-ends.
- Package/suffix: 8-pin package; “ACDR” denotes the specific TI packaging/lot options (RoHS-compliant, Tape & Reel variants).
- Common uses: Sensor conditioning, instrumentation amplifiers, audio preprocessing, and other precision analog tasks where two op-amp channels are helpful.
- What to verify in the datasheet: exact pinout, supply voltage range, input common‑mode range, output swing, gain-bandwidth product, slew rate, and input offset/bias currents (these vary by device variant).
- Quick note: Always consult the latest TI datasheet for the precise electrical specs and recommended operating conditions for your chosen variant.
If you’d like, I can summarize the current datasheet’s key specs or compare it with similar TI dual op-amps.
- What it is: A Texas Instruments integrated circuit, typically a dual operational amplifier used for precision signal amplification in analog front-ends.
- Package/suffix: 8-pin package; “ACDR” denotes the specific TI packaging/lot options (RoHS-compliant, Tape & Reel variants).
- Common uses: Sensor conditioning, instrumentation amplifiers, audio preprocessing, and other precision analog tasks where two op-amp channels are helpful.
- What to verify in the datasheet: exact pinout, supply voltage range, input common‑mode range, output swing, gain-bandwidth product, slew rate, and input offset/bias currents (these vary by device variant).
- Quick note: Always consult the latest TI datasheet for the precise electrical specs and recommended operating conditions for your chosen variant.
If you’d like, I can summarize the current datasheet’s key specs or compare it with similar TI dual op-amps.
Pinout
Pin count: 8 pins (8-pin package, e.g., SOIC/DIP).
Function: Dual operational amplifier in one package (two independent op-amps). Each op-amp has a non-inverting input (+), an inverting input (−), and an output; plus power supply pins (V+ and V−).
Typical pinout (TI 8-pin op-amps): 1 = Output A, 2 = Inverting input A, 3 = Non-inverting input A, 4 = V−, 5 = Non-inverting input B, 6 = Inverting input B, 7 = Output B, 8 = V+.
Function: Dual operational amplifier in one package (two independent op-amps). Each op-amp has a non-inverting input (+), an inverting input (−), and an output; plus power supply pins (V+ and V−).
Typical pinout (TI 8-pin op-amps): 1 = Output A, 2 = Inverting input A, 3 = Non-inverting input A, 4 = V−, 5 = Non-inverting input B, 6 = Inverting input B, 7 = Output B, 8 = V+.
Manufacturer
Manufacturer: Texas Instruments (TI).
Type of company: An American multinational semiconductor company that designs and manufactures analog and embedded processing integrated circuits.
Type of company: An American multinational semiconductor company that designs and manufactures analog and embedded processing integrated circuits.
Application
TI TLE2062ACDR is a dual operational amplifier. Common application areas include:
- Sensor signal conditioning (bridges, thermocouples, RTDs)
- Instrumentation and ADC front-ends
- Active analog filters (Sallen-Key, biquad, etc.)
- Audio preamplification and low-noise amplification
- Servo and control feedback networks
- Automotive and industrial sensor interfaces and signal processing
- Sensor signal conditioning (bridges, thermocouples, RTDs)
- Instrumentation and ADC front-ends
- Active analog filters (Sallen-Key, biquad, etc.)
- Audio preamplification and low-noise amplification
- Servo and control feedback networks
- Automotive and industrial sensor interfaces and signal processing
Package
An 8-pin SOIC package (D package), RoHS-compliant lead-free, supplied in Tape & Reel (DR) packaging.
