仕様
| 属性 | 値 |
| Package / Case | Tape & Reel (TR),Cut Tape (CT),Bulk |
| Series | SWIFT™ |
| Part Status | Active |
| Function | Step-Down |
| Output Configuration | Positive |
| Topology | Buck |
| Output Type | Adjustable |
| Number of Outputs | 1 |
| Voltage - Input (Min) | 4.5V |
| Voltage - Input (Max) | 17V |
| Voltage - Output (Min/Fixed) | 0.8V |
| Voltage - Output (Max) | 15V |
| Current - Output | 6A |
| Frequency - Switching | 200kHz ~ 1.6MHz |
| Synchronous Rectifier | Yes |
| Operating Temperature | -40°C ~ 150°C (TJ) |
| Mounting Type | Surface Mount |
概要
Description
The TPS54620RGYR is a high-performance, synchronous step-down DC-DC converter from Texas Instruments. It is part of the SWIFT™ series, designed to deliver highly efficient power conversion for a variety of applications. The device supports an input voltage range of 4.5V to 17V and can provide an output current of up to 6A, making it suitable for powering high-performance processors, FPGAs, and ASICs. The TPS54620RGYR features a fixed switching frequency of 500kHz or 1MHz and offers an adjustable output voltage down to 0.8V, providing flexibility for various system requirements.
This chip includes advanced features such as internal loop compensation, a high-side MOSFET and low-side MOSFET for synchronous rectification, and cycle-by-cycle current limiting for protection. It also supports various operating modes, including forced continuous conduction mode (CCM) and discontinuous conduction mode (DCM), to optimize efficiency across different load conditions. The device is available in a thermally enhanced 3.5mm x 3.5mm QFN package, which helps in efficient heat dissipation, making it ideal for compact and thermally constrained applications.
This chip includes advanced features such as internal loop compensation, a high-side MOSFET and low-side MOSFET for synchronous rectification, and cycle-by-cycle current limiting for protection. It also supports various operating modes, including forced continuous conduction mode (CCM) and discontinuous conduction mode (DCM), to optimize efficiency across different load conditions. The device is available in a thermally enhanced 3.5mm x 3.5mm QFN package, which helps in efficient heat dissipation, making it ideal for compact and thermally constrained applications.
Equivalent
The TPS54620RGYR is a DC-DC buck converter from Texas Instruments. Equivalent products from other manufacturers include:
1. LM43603 from Texas Instruments
2. LMR33630 from Texas Instruments
3. MAX17504 from Maxim Integrated
4. LT8640S from Analog Devices
5. MP28275 from Monolithic Power Systems
These alternatives offer similar voltage and current ratings, and feature sets for comparable applications. Always verify compatibility with your specific design requirements.
1. LM43603 from Texas Instruments
2. LMR33630 from Texas Instruments
3. MAX17504 from Maxim Integrated
4. LT8640S from Analog Devices
5. MP28275 from Monolithic Power Systems
These alternatives offer similar voltage and current ratings, and feature sets for comparable applications. Always verify compatibility with your specific design requirements.
Features
The TPS54620RGYR is a highly efficient DC-DC step-down converter designed by Texas Instruments. Key features include:
1. Wide Input Voltage Range: Operates from 4.5V to 17V, suitable for various applications.
2. High Output Current: Capable of delivering up to 6A continuous output current.
3. Adjustable Output Voltage: Allows for outputs ranging from 0.76V to 6V.
4. High Efficiency: Achieves efficiency rates up to 95%, minimizing power loss.
5. Switching Frequency: Supports a fixed frequency of 500kHz, optimizing performance and size.
6. Integrated MOSFETs: Incorporates high-side and low-side MOSFETs for better efficiency and space saving.
7. Soft Start: Features a programmable soft start to limit inrush current during startup.
8. Protection Features: Includes overcurrent protection, thermal shutdown, and undervoltage lockout.
9. Compact Package: Available in a 16-pin VQFN package, facilitating compact designs.
10. Thermal Performance: Designed for good thermal performance, suitable for demanding environments.
These features make the TPS54620RGYR ideal for applications in telecom, networking, and industrial systems requiring robust power management.
1. Wide Input Voltage Range: Operates from 4.5V to 17V, suitable for various applications.
2. High Output Current: Capable of delivering up to 6A continuous output current.
3. Adjustable Output Voltage: Allows for outputs ranging from 0.76V to 6V.
4. High Efficiency: Achieves efficiency rates up to 95%, minimizing power loss.
5. Switching Frequency: Supports a fixed frequency of 500kHz, optimizing performance and size.
6. Integrated MOSFETs: Incorporates high-side and low-side MOSFETs for better efficiency and space saving.
7. Soft Start: Features a programmable soft start to limit inrush current during startup.
8. Protection Features: Includes overcurrent protection, thermal shutdown, and undervoltage lockout.
9. Compact Package: Available in a 16-pin VQFN package, facilitating compact designs.
10. Thermal Performance: Designed for good thermal performance, suitable for demanding environments.
These features make the TPS54620RGYR ideal for applications in telecom, networking, and industrial systems requiring robust power management.
Pinout
The TPS54620RGYR is a synchronous buck converter from Texas Instruments. It comes in a 16-pin VQFN (RGY) package. The main functions of its pins are as follows:
1. VIN (Pin 1): Input voltage supply.
2. EN (Pin 2): Enable pin to turn the converter on/off.
3. SS/TR (Pin 3): Soft-start and tracking pin.
4. FB (Pin 4): Feedback pin to set the output voltage.
5. COMP (Pin 5): Compensation for error amplifier.
6. RT/CLK (Pin 6): Frequency set and synchronization.
7. PWRGD (Pin 7): Power good indicator.
8. BOOT (Pin 8): Bootstrap capacitor connection.
9. SW (Pins 9-10): Switch node, connected to the inductor.
10. GND (Pin 11): Ground connection.
11. PH (Pins 12-14): Phase node, connect to the inductor.
12. VREG5 (Pin 15): 5V regulator output.
13. VBST (Pin 16): Bootstrap capacitor.
Additionally, the thermal pad (exposed) is used for heat dissipation and should be electrically connected to ground.
This layout supports efficient power conversion with a focus on compactness and thermal management, suitable for various electronic applications.
1. VIN (Pin 1): Input voltage supply.
2. EN (Pin 2): Enable pin to turn the converter on/off.
3. SS/TR (Pin 3): Soft-start and tracking pin.
4. FB (Pin 4): Feedback pin to set the output voltage.
5. COMP (Pin 5): Compensation for error amplifier.
6. RT/CLK (Pin 6): Frequency set and synchronization.
7. PWRGD (Pin 7): Power good indicator.
8. BOOT (Pin 8): Bootstrap capacitor connection.
9. SW (Pins 9-10): Switch node, connected to the inductor.
10. GND (Pin 11): Ground connection.
11. PH (Pins 12-14): Phase node, connect to the inductor.
12. VREG5 (Pin 15): 5V regulator output.
13. VBST (Pin 16): Bootstrap capacitor.
Additionally, the thermal pad (exposed) is used for heat dissipation and should be electrically connected to ground.
This layout supports efficient power conversion with a focus on compactness and thermal management, suitable for various electronic applications.
Manufacturer
The TPS54620RGYR is manufactured by Texas Instruments Incorporated (TI). Texas Instruments is a global semiconductor company known for designing and manufacturing a wide range of electronic components and integrated circuits. TI specializes in creating solutions for various industries, including automotive, industrial, personal electronics, communications equipment, and enterprise systems.
The company is renowned for its high-performance analog semiconductors and embedded processors. These products are integral in numerous applications, such as power management, data converters, amplifiers, sensors, and microcontrollers. Texas Instruments has a strong focus on innovation and continuously invests in research and development to provide advanced technologies and solutions.
As a leader in the semiconductor industry, TI operates worldwide, with manufacturing, design, and sales operations across the globe. Its products are widely used by engineers and designers to create energy-efficient electronic systems, making TI a crucial player in advancing technological development.
The company is renowned for its high-performance analog semiconductors and embedded processors. These products are integral in numerous applications, such as power management, data converters, amplifiers, sensors, and microcontrollers. Texas Instruments has a strong focus on innovation and continuously invests in research and development to provide advanced technologies and solutions.
As a leader in the semiconductor industry, TI operates worldwide, with manufacturing, design, and sales operations across the globe. Its products are widely used by engineers and designers to create energy-efficient electronic systems, making TI a crucial player in advancing technological development.
Application
The TPS54620RGYR is a DC-DC step-down converter suitable for applications requiring efficient power management. It is commonly used in areas such as telecommunications, industrial automation, and computing systems. Specific applications include powering FPGAs, ASICs, DSPs, microcontrollers, and other digital ICs. It is also found in distributed power systems, networking equipment, and power regulation in high-performance server farms. The device's ability to deliver up to 6 A output current makes it ideal for use in high-density power solutions, as well as in battery-powered applications due to its high efficiency and low power consumption.
Package
The TPS54620RGYR is a DC-DC converter from Texas Instruments, and is housed in a VQFN (Very Thin Quad Flat No-Lead) package with 24 pins. The "RGY" suffix indicates the specific package type and pin configuration, while the "R" indicates the reel packaging for automated assembly processes.