TPS7A0218PDBVR

画像は参考用です

TPS7A0218PDBVR

+BOM

IC REG LINEAR 1.8V 200MA SOT23-5

  • メーカーSTマイクロエレクトロニクス

  • メーカー品番 #TPS7A0218PDBVR

  • パッケージ SOT-23 (DBV)-5

  • 在庫状況4997

365 日間品質保証

7*24 日間の品質保証

90-時間単位のサービス保証

1日間のアフターサービス保証

仕様

属性 値
Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
OutputConfiguration Positive
OutputType Fixed
NumberofRegulators 1
Voltage-Input(Max) 6V
Voltage-Output(Min/Fixed) 1.8V
VoltageDropout(Max) 0.45V @ 200mA
Current-Output 200mA
Current-Quiescent(Iq) 60 nA
PSRR 55dB (1kHz)
ControlFeatures Enable
ProtectionFeatures Over Current, Over Temperature, Under Voltage Lockout (UVLO)
OperatingTemperature -40°C ~ 125°C (TJ)
MountingType Surface Mount
Package/Case SC-74A, SOT-753

概要

Description

TPS7A0218PDBVR is a Texas Instruments fixed-output, high-voltage LDO regulator in the TPS7A02x family. It provides a stable 1.8-V output with an enable (EN) input, designed for automotive/industrial rails. Key features typically include low dropout, high PSRR, low quiescent current, and protection functions (overcurrent/thermal shutdown). The PDBVR suffix indicates a DBV package (lead-free, reel). It’s suitable for powering digital logic (e.g., microcontrollers, sensors) from a higher input rail. How to use: connect VIN to the input supply, drive EN to enable, and place the recommended low‑ESR capacitors on input and output per the datasheet. Consider thermal dissipation at higher loads. For exact electrical specs (input range, dropout, PSRR, IQ), package dimensions, and ordering details, consult the TPS7A02x datasheet and TI product folder.

Features

Here are typical features of the TPS7A0218PDBVR:
- 1.8-V fixed output low-dropout regulator (LDO)
- Output current up to ~150 mA
- Low dropout voltage
- Ultra-low quiescent current
- Enable/shutdown input
- Protection: current limit/short-circuit protection and thermal shutdown
- Reverse-current protection
- Low-noise performance with good PSRR
- RoHS-compliant Pb-free in PDBVR package
Note: for exact electrical specs (input range, dropout, quiescent current, accuracy), please check the TI datasheet.

Pinout

8 pins. It is a fixed-output low-noise LDO regulator (TPS7A0218) in the PDBVR package, providing a 1.8 V output. Pin functions typically include VIN, VOUT, GND, EN (enable), BYP (bypass for noise reduction), and a status/pwr-good pin; the remaining pins are no-connect.

Manufacturer

- Manufacturer: Texas Instruments (TI).
- Company type: American multinational corporation that designs and manufactures semiconductors and integrated circuits, specializing in analog and mixed-signal ICs and embedded processing.

Application

TPS7A0218PDBVR is a low-noise, high-PSRR LDO that provides a clean 1.8 V rail. Typical application areas:
- Post-regulation for digital cores (MCUs, DSPs, FPGAs, CPUs) and memory
- Noise-sensitive analog/RF front-ends (ADCs/DACs, RF receivers)
- Sensor interfaces and data-acquisition systems
- Portable/battery-powered devices needing a low-noise 1.8 V supply
- Automotive and industrial circuits requiring a robust 1.8 V rail and wide input range.

Package

DBV package — 8-pin VSSOP (Very Small Outline Package). The “VR” suffix indicates Tape & Reel packaging; Pb-free.

TPS7A0218PDBVRに関連する製品

  • 迅速な見積もり

  • 見積もり依頼を送信 TPS7A0218PDBVR このフォームをご利用ください。12時間以内にご返信いたします。