仕様
| 属性 | 値 |
| Package / Case | Tray |
| Series | SpiFlash® |
| Part Status | Active |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH - NOR |
| Memory Size | 1Gb (128M x 8) |
| Memory Interface | SPI - Quad I/O, QPI |
| Clock Frequency | 133 MHz |
| Write Cycle Time - Word Page | 3ms |
| Access Time | 7 ns |
| Voltage - Supply | 1.7V ~ 1.95V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
概要
Description
W25Q01NWZEIM is a Winbond 1 Mbit SPI serial flash memory device. It provides non-volatile storage for firmware and data in embedded systems.
Key points:
- Capacity: 1,048,576 bits ≈ 128 KB
- Interface: SPI (CS, CLK, MOSI, MISO), with optional WP/HOLD pins
- Supply: typically 2.7–3.6 V
- Package: 8-pin (SOP/SOIC) with industrial temperature variant
- Features: standard Read/ Fast Read, Page Program, Sector/Block/Chip Erase, Write Enable/Disable, low-power standby
WZEIM suffix indicates a specific packaging/temperature variant in Winbond’s catalog (industrial-grade variant in an 8-pin package). For exact timing, page/sector sizes, and command set details, consult the Winbond W25Q01N/W25Q01 datasheet. Typical applications include firmware storage, configuration data, and small lookup tables in microcontroller-based systems.
Key points:
- Capacity: 1,048,576 bits ≈ 128 KB
- Interface: SPI (CS, CLK, MOSI, MISO), with optional WP/HOLD pins
- Supply: typically 2.7–3.6 V
- Package: 8-pin (SOP/SOIC) with industrial temperature variant
- Features: standard Read/ Fast Read, Page Program, Sector/Block/Chip Erase, Write Enable/Disable, low-power standby
WZEIM suffix indicates a specific packaging/temperature variant in Winbond’s catalog (industrial-grade variant in an 8-pin package). For exact timing, page/sector sizes, and command set details, consult the Winbond W25Q01N/W25Q01 datasheet. Typical applications include firmware storage, configuration data, and small lookup tables in microcontroller-based systems.
Equivalent
Equivalents (1 Mbit SPI NOR Flash) from other vendors: GigaDevice GD25Q01C; Macronix MX25L01/MX25L01D; Micron N25Q010A; Spansion/Cypress S25FL01K; Puya P25Q01. Note: compatibility depends on voltage, timing, and package—verify datasheet before substitution.
Features
W25Q01NWZEIM features (concise):
- Density: 1 Mbit (128 KB) serial Flash memory
- Interface: SPI (standard SPI; no QPI)
- Voltage: 2.7–3.6V operation
- Speed: fast/continuous read up to ~104 MHz
- Organization: 256-byte page size; 256-byte page program
- Erase types: 4 KB sectors; 32 KB and 64 KB blocks; full chip erase
- Read/write operations: random read, requires WEL/Write Enable Latch; WIP status bit
- Power modes: active, deep power-down, and standby
- Endurance/retention: ~100k erase/program cycles; data retention >20 years
- Security/protection: block protection registers; hardware WP/hold features
- Packaging/temp: 8-pin package; industrial temperature range (-40°C to +85°C)
Note: This embodies typical Winbond W25Q01SPI family features; exact options may vary by revision.
- Density: 1 Mbit (128 KB) serial Flash memory
- Interface: SPI (standard SPI; no QPI)
- Voltage: 2.7–3.6V operation
- Speed: fast/continuous read up to ~104 MHz
- Organization: 256-byte page size; 256-byte page program
- Erase types: 4 KB sectors; 32 KB and 64 KB blocks; full chip erase
- Read/write operations: random read, requires WEL/Write Enable Latch; WIP status bit
- Power modes: active, deep power-down, and standby
- Endurance/retention: ~100k erase/program cycles; data retention >20 years
- Security/protection: block protection registers; hardware WP/hold features
- Packaging/temp: 8-pin package; industrial temperature range (-40°C to +85°C)
Note: This embodies typical Winbond W25Q01SPI family features; exact options may vary by revision.
Pinout
- Pin count: 8 pins (SOP-8/US8 package).
- Function: Winbond W25Q01NWZEIM is a 1 Mbit SPI serial flash memory. Interface pins: CS, SCK, SI (MOSI), SO (MISO); control pins: WP# and HOLD#; power pins: VCC and GND.
- Typical pinout (SOIC-8): Pin1 CS, Pin2 DO, Pin3 WP#, Pin4 VSS, Pin5 DI, Pin6 CLK, Pin7 HOLD#, Pin8 VCC.
- Function: Winbond W25Q01NWZEIM is a 1 Mbit SPI serial flash memory. Interface pins: CS, SCK, SI (MOSI), SO (MISO); control pins: WP# and HOLD#; power pins: VCC and GND.
- Typical pinout (SOIC-8): Pin1 CS, Pin2 DO, Pin3 WP#, Pin4 VSS, Pin5 DI, Pin6 CLK, Pin7 HOLD#, Pin8 VCC.
Manufacturer
- Manufacturer: Winbond Electronics Corporation (Winbond).
- What kind of company: A Taiwanese semiconductor company that designs and manufactures memory integrated circuits (e.g., NOR flash and DRAM) used in electronics.
- What kind of company: A Taiwanese semiconductor company that designs and manufactures memory integrated circuits (e.g., NOR flash and DRAM) used in electronics.
Application
W25Q01NWZEIM is a 1 Mbit serial flash memory (SPI). Common application areas:
- Boot/firmware storage for microcontrollers/SoCs (SPI flash memory)
- Code and data storage in consumer electronics (set-top boxes, cameras, audio players, displays)
- IoT and industrial devices for firmware updates, configuration data, and event/log storage
- Networking equipment (routers, modems, gateways) needing small non-volatile storage
- Embedded systems and development boards requiring low-pin-count, compact memory for calibration tables and look-up data
These uses leverage its small footprint, non-volatile storage, and simple SPI interface.
- Boot/firmware storage for microcontrollers/SoCs (SPI flash memory)
- Code and data storage in consumer electronics (set-top boxes, cameras, audio players, displays)
- IoT and industrial devices for firmware updates, configuration data, and event/log storage
- Networking equipment (routers, modems, gateways) needing small non-volatile storage
- Embedded systems and development boards requiring low-pin-count, compact memory for calibration tables and look-up data
These uses leverage its small footprint, non-volatile storage, and simple SPI interface.
Package
8-pin SOP (SOIC-8) package.
