74HC00D vs 74HC03D-Q100J

74HC00Dと74HC03D-Q100Jの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The 74HC00D and 74HC03D-Q100J are not functionally interchangeable. Although both are quad 2-input NAND gates in the same SO14 package, the 74HC00D provides standard push-pull CMOS outputs, whereas the 74HC03D-Q100J features open-drain outputs that require external pull-up resistors. This fundamental output architecture difference, combined with the automotive-grade qualification of the 74HC03D-Q100J, makes direct substitution impractical without circuit redesign.

Different output type External pull-up may be required Different logic family grade Different drive characteristics

Parts at a glance

Part A

74HC00D

東芝セミコンダクター・アンド・ストレージ

Lifecycle
Active
Stock
4166 個数
Package
SOIC-14
Series
ロジック - ゲートおよびインバータ
Part B

74HC03D-Q100J

ネクスペリアUSA株式会社

Lifecycle
Active
Stock
9287 個数
Series
ロジック - ゲートおよびインバータ

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter 74HC00D 74HC03D-Q100J Why it matters
Logic Function Quad 2-input NAND gate Quad 2-input NAND gate with open-drain outputs The 74HC00D has standard push-pull outputs, while the 74HC03D-Q100J has open-drain outputs, which fundamentally changes how the output can be used in a circuit.
Output Type Push-pull (CMOS) Open-drain Push-pull outputs can source and sink current actively, whereas open-drain outputs can only sink current and require an external pull-up resistor, affecting drive capability and interfacing.
Output Drive Current (IOL/IOH) ±4 mA (at VCC = 4.5 V) 4 mA (IOL only; no IOH sourcing) The 74HC00D can both source and sink current, while the 74HC03D-Q100J can only sink current, limiting its ability to directly drive loads that require a high logic level.
Propagation Delay (tPD) ~9 ns (at VCC = 4.5 V, typical) ~13 ns (at VCC = 4.5 V, typical) Different propagation delays affect timing margins in high-speed digital circuits and may impact signal integrity in synchronous designs.
Qualification Standard Standard commercial/industrial grade AEC-Q100 qualified (automotive grade) The Q100J suffix indicates automotive qualification, meaning the 74HC03D-Q100J is tested for higher reliability and temperature extremes, making it suitable for automotive applications.
Operating Temperature Range -40°C to +125°C -40°C to +125°C (AEC-Q100 qualified) Although the temperature range is similar, the automotive qualification ensures stricter testing and reliability for the 74HC03D-Q100J in harsh environments.
Package SO14 (SOIC-14) SO14 (SOIC-14) Both use the same package, so footprint compatibility is maintained, but the electrical differences still prevent direct substitution.
Supply Voltage Range 2 V to 6 V 2 V to 6 V Both operate over the same supply voltage range, so power supply compatibility is not a differentiator.
Input Type Standard CMOS input Standard CMOS input Input characteristics are identical, so input interfacing is compatible between the two devices.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification 74HC00D 74HC03D-Q100J
Supplier - Nexperia USA Inc.
Series 74HC Automotive, AEC-Q100, 74HC
Part Status Active Active
Logic Type NAND Gate NAND Gate
Number of Circuits 4 4
Number of Inputs 2 2
Features - Open Drain
Voltage - Supply 2V ~ 6V 2V ~ 6V
Current - Quiescent (Max) 1 µA 2 µA
Current - Output High Low 5.2mA, 5.2mA -, 5.2mA
Logic Level - Low 0.5V ~ 1.8V 0.5V ~ 1.8V
Logic Level - High 1.5V ~ 4.2V 1.5V ~ 4.2V
Max Propagation Delay @ V Max CL 13ns @ 6V, 50pF 16ns @ 6V, 50pF
Operating Temperature -40°C ~ 125°C -40°C ~ 125°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What is the primary functional difference between the 74HC00D and the 74HC03D-Q100J?

The 74HC00D contains four independent 2-input NAND gates with standard push-pull (totem-pole) outputs. The 74HC03D-Q100J contains four independent 2-input NAND gates with open-drain outputs, meaning each output requires an external pull-up resistor to define the high logic level.

Are the 74HC00D and 74HC03D-Q100J pin-to-pin compatible?

Yes. Both devices are offered in the SO14 package and use the same standard 14-pin pinout for a quad 2-input NAND gate function, with pins 1, 2, 4, 5, 9, 10, 12, and 13 as inputs, pins 3, 6, 8, and 11 as outputs, pin 7 as GND, and pin 14 as VCC. However, the open-drain outputs of the 74HC03D-Q100J require external pull-up resistors, which the 74HC00D does not.

Can the 74HC00D be used as a direct drop-in replacement for the 74HC03D-Q100J in an existing design?

No, not without circuit modification. The 74HC00D has active push-pull outputs, while the 74HC03D-Q100J has open-drain outputs. Replacing an open-drain device with a push-pull device can cause bus contention if multiple outputs are tied together, and it removes the ability to wire-AND outputs or level-shift via an external pull-up. Conversely, replacing a 74HC00D with a 74HC03D-Q100J requires adding pull-up resistors and verifying the resulting rise times and logic levels.

What are the supply voltage and logic family specifications for both devices?

Both the 74HC00D and the 74HC03D-Q100J are HC-family CMOS devices typically specified for a supply voltage range of 2.0 V to 6.0 V, with nominal 5 V operation. They provide standard HC input thresholds and are compatible with LSTTL output levels when operated at 5 V. Exact limits should be confirmed on the respective manufacturer datasheets.

What does the Q100 suffix indicate on the 74HC03D-Q100J?

The Q100 suffix indicates that the device is qualified to the AEC-Q100 standard for automotive-grade integrated circuits. This means it has undergone additional stress testing and qualification for use in automotive and other high-reliability applications. The 74HC00D, as a standard commercial part, does not carry this automotive qualification.

How do the output drive characteristics differ between the two devices?

The 74HC00D provides standard CMOS push-pull outputs that can both source and sink current, typically in the range of ±4 mA at 5 V. The 74HC03D-Q100J provides open-drain outputs that can only sink current to ground; the high state is achieved only through an external pull-up resistor. The sink current capability of the 74HC03D-Q100J is typically comparable to the 74HC00D, but the source current is determined by the external pull-up and the output low-impedance path is absent in the high state.

Which device is more suitable for wired-OR or wired-AND logic configurations?

The 74HC03D-Q100J is suitable for wired-AND configurations because its open-drain outputs can be tied together with a single pull-up resistor to implement a logical AND of the outputs. The 74HC00D cannot be used in this manner because its push-pull outputs would contend with each other if tied together, potentially causing excessive current and unreliable logic levels.

Are the input and output voltage levels of the 74HC00D and 74HC03D-Q100J identical?

The input switching thresholds are the same for both devices because they share the same HC-family input structure. The output voltage levels differ: the 74HC00D produces standard CMOS output high and low levels, while the 74HC03D-Q100J produces a low level when on and a high-impedance state when off, with the actual high level determined by the external pull-up resistor and load. Therefore, the output high voltage of the 74HC03D-Q100J is not internally fixed.