74HC00D
東芝セミコンダクター・アンド・ストレージ
- Lifecycle
- Active
- Stock
- 4166 個数
- Package
- SOIC-14
- Series
- ロジック - ゲートおよびインバータ
74HC00Dと74HC05Dの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。
Replacement verdict
The 74HC00D and 74HC05D are not functionally interchangeable despite sharing the same 74HC CMOS logic family and SOIC-14 package. The 74HC00D contains four 2-input NAND gates with standard push-pull outputs, while the 74HC05D contains six open-drain inverters. The differences in logic function, channel count, output configuration, and the external pull-up requirement of the open-drain outputs make direct substitution impossible without circuit redesign.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | 74HC00D | 74HC05D | Why it matters |
|---|---|---|---|
| Logic Function | Quad 2-input NAND gate | Hex inverter with open-drain outputs | The fundamental logic function differs, so the two parts are not functionally interchangeable in a circuit. |
| Number of Gates | 4 | 6 | Different gate counts affect how many independent logic operations can be performed per package. |
| Output Type | Push-pull (CMOS) | Open-drain | Open-drain outputs require external pull-up resistors and allow wired-OR configurations, unlike push-pull outputs. |
| Input Configuration | 2 inputs per gate | 1 input per gate | The number of inputs per gate determines the logic operations that can be implemented directly. |
| Propagation Delay (typical at 5V) | ~9 ns | ~12 ns | Propagation delay affects maximum operating frequency and timing margins in digital circuits. |
| Output Drive Current | ±4 mA (standard CMOS drive) | Sink only, limited by external pull-up | Drive capability determines fan-out and ability to drive loads such as LEDs or other logic inputs. |
| Supply Voltage Range | 2 V to 6 V | 2 V to 6 V | Both parts operate over the same supply range, allowing use in similar power environments. |
| Package | SO14 | SO14 | Identical package and pin count allow the same PCB footprint, though pin functions differ. |
| Logic Family | 74HC | 74HC | Same logic family ensures compatible input/output voltage thresholds and noise margins. |
| Pin Function Compatibility | NAND gate inputs/outputs on pins 1-3, 4-6, 9-8, 10-11 | Inverter inputs/outputs on pins 1-2, 3-4, 5-6, 9-8, 11-10, 13-12 | Pin functions differ, so the parts cannot be dropped into the same socket without redesign. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | 74HC00D | 74HC05D |
|---|---|---|
| Series | 74HC | 74HC |
| Part Status | Active | Active |
| Logic Type | NAND Gate | Inverter |
| Number of Circuits | 4 | 6 |
| Number of Inputs | 2 | 1 |
| Features | - | Open Drain |
| Voltage - Supply | 2V ~ 6V | 2V ~ 6V |
| Current - Quiescent (Max) | 1 µA | 1 µA |
| Current - Output High Low | 5.2mA, 5.2mA | -, 5.2mA |
| Logic Level - Low | 0.5V ~ 1.8V | 0.5V ~ 1.8V |
| Logic Level - High | 1.5V ~ 4.2V | 1.5V ~ 4.2V |
| Max Propagation Delay @ V Max CL | 13ns @ 6V, 50pF | 15ns @ 6V, 50pF |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
The 74HC00D contains four independent 2-input NAND gates with standard push-pull CMOS outputs. The 74HC05D contains six independent inverters with open-drain outputs, meaning each output requires an external pull-up resistor to define the high logic level.
No. Although both devices are commonly offered in a 14-pin SO package, their pinouts differ. The 74HC00D uses pins 1, 2, 4, 5, 9, 10, 12, and 13 for gate inputs and pins 3, 6, 8, and 11 for outputs, with pins 7 and 14 for ground and VCC. The 74HC05D uses pins 1, 3, 5, 9, 11, and 13 for inverter inputs and pins 2, 4, 6, 8, 10, and 12 for open-drain outputs, with pins 7 and 14 for ground and VCC.
No. The 74HC05D provides inverting open-drain outputs rather than non-inverting NAND push-pull outputs, has a different pinout, and requires external pull-up resistors. A direct replacement would require logic redesign, pinout adaptation, and pull-up resistor addition, so it is not a drop-in substitute.
The 74HC00D implements four independent 2-input NAND gates. Each gate output is LOW only when both corresponding inputs are HIGH; otherwise the output is HIGH.
The 74HC05D implements six independent inverters with open-drain outputs. Each output is pulled LOW when its input is HIGH, and floats when its input is LOW, requiring an external pull-up resistor to achieve a HIGH logic level.
Yes. Both are 74HC-series CMOS devices and are specified for a nominal supply voltage range of 2.0 V to 6.0 V, with 5 V being the most common operating voltage.
The 74HC05D is better suited for wired-OR or bus applications because its open-drain outputs can be tied together with a single pull-up resistor to implement a wired-OR function. The 74HC00D has push-pull outputs and cannot have its outputs directly tied together without risking contention.
Both devices are commonly available in SO14 and other standard 14-pin packages such as DIP-14 and TSSOP-14, but the specific package options depend on the manufacturer. Designers should verify the exact orderable part number and package suffix from the manufacturer datasheet.