AD8544ARZ vs AD8541AR-REEL7

AD8544ARZとAD8541AR-REEL7の詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The AD8544ARZ and AD8541AR-REEL7 are not drop-in replacements for one another. The AD8544ARZ is a quad-channel operational amplifier in a 14-lead SOIC package, while the AD8541AR-REEL7 is a single-channel device in an 8-lead SOIC package. Although both share the same CMOS rail-to-rail input/output architecture and similar supply voltage range, the channel count, package footprint, and pinout differ fundamentally, so a direct board-level substitution is not possible without redesign.

Different channel count Different package footprint Different pinout Different board layout required

Parts at a glance

Part A

AD8544ARZ

テキサス・インスツルメンツ

Lifecycle
Active
Stock
4354 個数
Package
SOIC-14
Series
リニアアンプ - 計装用、オペアンプ、バッファアンプ
Part B

AD8541AR-REEL7

テキサス・インスツルメンツ

Lifecycle
Active
Stock
2745 個数
Package
SOIC-8
Series
リニアアンプ - 計装用、オペアンプ、バッファアンプ

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8544ARZ AD8541AR-REEL7 Why it matters
Number of Amplifiers 4 (Quad) 1 (Single) Determines how many independent op-amp channels are available in one package; a quad cannot directly replace a single in a one-channel circuit without layout changes.
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V Both operate over the same single-supply range, so power-rail compatibility is preserved when substituting.
Input Offset Voltage (max) 6 mV 6 mV Offset voltage affects DC accuracy; matching values mean comparable precision in signal-conditioning applications.
Gain Bandwidth Product 1 MHz 1 MHz GBW sets the achievable closed-loop bandwidth; identical values indicate similar AC performance and frequency response.
Input Bias Current (typ) 1 pA 1 pA Very low CMOS input bias current suits high-impedance sensor interfaces; matching values preserve input loading behavior.
Quiescent Current per Amplifier (typ) 45 µA 45 µA Low supply current is critical for battery-powered designs; equal per-amplifier current keeps power budgets consistent.
Rail-to-Rail Input/Output Yes Yes RRIO capability maximizes dynamic range on low supply voltages; both share this feature for wide-swing signal handling.
Package Type 14-Lead SOIC 8-Lead SOIC Different package footprints and pin counts prevent direct drop-in replacement on an existing PCB.
Operating Temperature Range -40 °C to +125 °C -40 °C to +85 °C The wider temperature rating of the quad part matters for industrial or automotive environments where the single part may not be qualified.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8544ARZ AD8541AR-REEL7
Supplier - Rochester Electronics, LLC
Part Status Active Obsolete
Amplifier Type General Purpose General Purpose
Number of Circuits 4 1
Output Type Rail-to-Rail Rail-to-Rail
Slew Rate 0.92V/µs 0.92V/µs
Gain Bandwidth Product 1 MHz 1 MHz
Current - Input Bias 4 pA 4 pA
Voltage - Input Offset 1 mV 1 mV
Supply Current 45µA (x4 Channels) 45µA
Current - Output / Channel 30 mA 30 mA
Voltage - Supply Span(Min) 2.7 V 2.7 V
Voltage - Supply Span(Max) 5.5 V 5.5 V
Operating Temperature -40°C ~ 125°C -40°C ~ 125°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the key differences between the AD8544ARZ and AD8541AR-REEL7?

The AD8544ARZ is a quad (four-channel) rail-to-rail CMOS operational amplifier in a 14-lead SOIC package, while the AD8541AR-REEL7 is a single (one-channel) rail-to-rail CMOS op amp in an 8-lead SOIC package supplied on a 7-inch reel. Both share the same AD854x family core specifications, including 1 pA typical input bias current, rail-to-rail input and output, and single-supply operation from 2.7 V to 5.5 V, but they differ in channel count, package pinout, and packaging format.

Are the AD8544ARZ and AD8541AR-REEL7 electrically identical on a per-channel basis?

Yes. Both devices are members of the AD8541/AD8542/AD8544 family and share the same per-channel specifications, including a typical gain bandwidth product of 1 MHz, a typical slew rate of 0.92 V/µs, rail-to-rail input and output swing, and a typical input bias current of 1 pA. The primary differences are channel count, package, and pinout rather than per-amplifier electrical performance.

Can the AD8541AR-REEL7 be used as a drop-in replacement for one channel of the AD8544ARZ?

No, not as a direct drop-in. The AD8541AR-REEL7 is an 8-lead single op amp, whereas the AD8544ARZ is a 14-lead quad op amp. The package footprint, pin count, and pin functions differ, so the PCB land pattern and circuit layout must be redesigned. Only the per-channel electrical behavior is comparable, not the physical or pin-level compatibility.

What supply voltage range do both the AD8544ARZ and AD8541AR-REEL7 support?

Both devices operate from a single supply of 2.7 V to 5.5 V, and they also support dual-supply operation within the corresponding total supply range. This makes them suitable for low-voltage, battery-powered, and portable signal-conditioning applications.

What are the input and output characteristics of the AD8544ARZ and AD8541AR-REEL7?

Both amplifiers feature rail-to-rail input and rail-to-rail output stages, a typical input bias current of 1 pA, and a typical gain bandwidth product of 1 MHz. These characteristics suit high-impedance sensor interfaces, low-power filtering, and general-purpose signal buffering in single-supply systems.

How do the package and pinout differ between the AD8544ARZ and AD8541AR-REEL7?

The AD8544ARZ is supplied in a 14-lead SOIC package containing four independent op amps, while the AD8541AR-REEL7 is supplied in an 8-lead SOIC package containing a single op amp. Because the pin counts and pin assignments differ, the two parts are not pin-compatible and require different PCB footprints.

What does the REEL7 suffix indicate on the AD8541AR-REEL7?

The REEL7 suffix indicates that the AD8541AR devices are supplied on a 7-inch tape-and-reel carrier, which is intended for automated pick-and-place assembly. The AD8544ARZ is supplied in standard tube or tray packaging depending on the ordering quantity, so the packaging format also differs between the two parts.

Which part should be selected for a multi-channel design versus a single-channel design?

For designs requiring four matched amplifiers in one package, the AD8544ARZ is the appropriate choice because it integrates four channels in a 14-lead SOIC. For designs requiring only one amplifier, the AD8541AR-REEL7 is the appropriate choice because it provides a single channel in an 8-lead SOIC and is supplied on a 7-inch reel for automated assembly.