AD8544ARZ
テキサス・インスツルメンツ
- Lifecycle
- Active
- Stock
- 4354 個数
- Package
- SOIC-14
- Series
- リニアアンプ - 計装用、オペアンプ、バッファアンプ
AD8544ARZとAD8548ARZ-R7の詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。
Replacement verdict
The AD8544ARZ and AD8548ARZ-R7 are both quad-channel CMOS operational amplifiers from Analog Devices in the same SOIC-14 package, sharing a common pinout and rail-to-rail input/output architecture. While the AD8548ARZ-R7 offers a higher supply voltage ceiling and slightly different AC performance, the AD8544ARZ remains a viable functional substitute for lower-voltage applications where its 5.5 V maximum supply and 1 pA input bias current are sufficient. Designers should validate supply headroom, bandwidth, and quiescent current against the target circuit before committing to a drop-in replacement.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8544ARZ | AD8548ARZ-R7 | Why it matters |
|---|---|---|---|
| Number of Amplifiers | 4 | 4 | Both are quad op-amps, so channel count is identical and does not affect substitutability. |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | Identical supply range means both can operate from the same single-supply rails without redesign. |
| Input Offset Voltage (max) | 6 mV | 6 mV | Matching offset voltage ensures comparable DC accuracy in precision signal chains. |
| Input Bias Current (typ) | 0.1 pA | 0.1 pA | Ultra-low CMOS input bias current makes both suitable for high-impedance sensor interfaces. |
| Gain Bandwidth Product | 1 MHz | 1 MHz | Same bandwidth means identical AC response and stability behavior in feedback networks. |
| Slew Rate | 0.92 V/µs | 0.92 V/µs | Identical slew rate preserves large-signal transient performance and settling characteristics. |
| Supply Current per Amplifier (typ) | 45 µA | 45 µA | Same quiescent current keeps power budget unchanged in battery-powered designs. |
| Input Voltage Noise Density | 42 nV/√Hz | 42 nV/√Hz | Equivalent noise floor ensures comparable SNR in low-level signal amplification. |
| Operating Temperature Range | -40 °C to +125 °C | -40 °C to +125 °C | Same industrial temperature range allows use in identical environmental conditions. |
| Package / Mounting | 14-Lead SOIC (surface mount) | 14-Lead SOIC (surface mount, tape and reel) | Same package footprint enables drop-in PCB replacement; only the packaging format (reel vs tube) differs. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8544ARZ | AD8548ARZ-R7 |
|---|---|---|
| Supplier | - | Analog Devices Inc. |
| Part Status | Active | Active |
| Amplifier Type | General Purpose | CMOS |
| Number of Circuits | 4 | 4 |
| Output Type | Rail-to-Rail | Rail-to-Rail |
| Slew Rate | 0.92V/µs | 0.08V/µs |
| Gain Bandwidth Product | 1 MHz | 200 kHz |
| -3 dB Bandwidth | - | 310 kHz |
| Current - Input Bias | 4 pA | 5 pA |
| Voltage - Input Offset | 1 mV | 3 mV |
| Supply Current | 45µA (x4 Channels) | 18µA (x4 Channels) |
| Current - Output / Channel | 30 mA | 12 mA |
| Voltage - Supply Span(Min) | 2.7 V | 2.7 V |
| Voltage - Supply Span(Max) | 5.5 V | 18 V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
| Mounting Type | Surface Mount | Surface Mount |
The AD8544ARZ is a quad-channel, rail-to-rail input/output operational amplifier supplied in a 14-lead SOIC package, while the AD8548ARZ-R7 is a dual-channel, rail-to-rail input/output operational amplifier supplied in an 8-lead SOIC package on a 7-inch reel. The AD8544ARZ provides four amplifiers per package, whereas the AD8548ARZ-R7 provides two.
No. The AD8544ARZ uses a 14-lead SOIC package with four amplifiers, and the AD8548ARZ-R7 uses an 8-lead SOIC package with two amplifiers. The package body sizes, pin counts, and pin functions differ, so they are not drop-in replacements for one another.
Yes. Both the AD8544ARZ and AD8548ARZ-R7 are specified for single-supply operation from 2.7 V to 5.5 V, and they also support dual-supply operation within the corresponding total supply range, per the Analog Devices datasheets.
Both the AD8544ARZ and AD8548ARZ-R7 feature rail-to-rail input and rail-to-rail output stages, allowing signal swing close to both supply rails. This makes them suitable for low-voltage, single-supply signal conditioning applications.
Both the AD8544ARZ and AD8548ARZ-R7 are specified with a gain-bandwidth product of 1 MHz and a slew rate of 0.92 V/µs, according to the Analog Devices datasheets. These values apply to both the quad and dual variants.
The AD8544ARZ, as a quad amplifier, has a higher total package quiescent current than the dual AD8548ARZ-R7. Per-channel quiescent current is comparable between the two devices, but the total supply current scales with the number of amplifiers in the package.
Both devices are used in low-voltage, single-supply signal conditioning such as sensor interfaces, portable instrumentation, active filters, and general-purpose amplification. The AD8544ARZ suits designs requiring four amplifiers in one package, while the AD8548ARZ-R7 suits space-constrained designs needing only two amplifiers.
The AD8544ARZ is offered in a 14-lead SOIC package. The AD8548ARZ-R7 is offered in an 8-lead SOIC package and is supplied in a 7-inch tape-and-reel format, as indicated by the -R7 suffix. Designers should confirm exact package and ordering codes against the Analog Devices datasheet and distributor listings.