ADM242AR vs ADM241LJRSZ

ADM242ARとADM241LJRSZの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADM241LJRSZ is a functionally compatible candidate for the ADM242AR, sharing the same dual RS-232 driver/receiver architecture, supply voltage range, and SOIC-16 footprint. Designers should validate the lower data rate (120 kbps vs 200 kbps), the reduced external capacitor count, and the narrower operating temperature range before committing to a drop-in substitution in existing designs.

Function and Channel Configuration High match
Data Rate Validation required
Package and Pinout High match
Operating Temperature Range Validation required

Parts at a glance

Part A

ADM242AR

テキサス・インスツルメンツ

Lifecycle
Active
Stock
6746 個数
Package
SOIC-18
Series
インターフェース - ドライバ、レシーバ、トランシーバ
Part B

ADM241LJRSZ

テキサス・インスツルメンツ

Lifecycle
Active
Stock
4476 個数
Package
SSOP-28
Series
インターフェース - ドライバ、レシーバ、トランシーバ

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADM242AR ADM241LJRSZ Why it matters
Number of Drivers/Receivers 2/2 4/0 Determines the signal direction and channel count; a 2/2 transceiver cannot directly replace a 4/0 driver configuration in a given interface.
Data Rate 200 kbps 120 kbps Maximum supported signaling speed; the lower-rated device may not meet timing requirements of a system designed for the faster part.
Supply Voltage 5 V 5 V Both operate from a single 5 V rail, so power-supply compatibility is maintained between the two parts.
Operating Temperature Range -40 °C to +85 °C 0 °C to +70 °C The wider industrial range of the ADM242AR allows use in harsher environments where the commercial-grade ADM241LJRSZ may not be rated.
Package / Mounting 16-SOIC (surface mount) 28-SOIC Wide (surface mount) Different package footprints and pin counts prevent direct board-level drop-in replacement without layout changes.
Integrated Charge Pump Yes Yes On-chip charge pumps generate the required RS-232 voltage levels from a single 5 V supply, simplifying the power design for both parts.
Receiver Input Voltage Range ±30 V ±30 V Wide receiver input tolerance provides robust protection against RS-232 line faults and is matched between the two devices.
Number of Pins 16 28 Pin count affects PCB footprint and routing; the mismatch means the parts are not mechanically interchangeable.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADM242AR ADM241LJRSZ
Supplier - Rochester Electronics, LLC,Analog Devices Inc.
Part Status Obsolete Active
Type Transceiver Transceiver
Protocol RS232 RS232
Number of Drivers/Receivers 2/2 4/5
Duplex Full Full
Receiver Hysteresis 400 mV 650 mV
Data Rate 200kbps 120Kbps
Voltage - Supply 4.5V ~ 5.5V 4.75V ~ 5.25V
Operating Temperature -40°C ~ 85°C 0°C ~ 70°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the primary differences between the ADM242AR and ADM241LJRSZ?

The ADM242AR is a dual-channel RS-232 line driver/receiver in a 16-lead SOIC package, specified for operation from a single 5 V supply. The ADM241LJRSZ is a lower-power variant in a 28-lead SSOP package that includes an on-board charge pump and shutdown/enable control, and is specified over the commercial temperature range. The two differ in package, pinout, power consumption, and control features, so they are not pin-for-pin interchangeable.

Are the ADM242AR and ADM241LJRSZ pin-compatible?

No. The ADM242AR uses a 16-lead SOIC (narrow body) package, while the ADM241LJRSZ uses a 28-lead SSOP package. The pin counts and pin functions differ, so the PCB land patterns and pin assignments are not compatible.

What supply voltage do these devices require?

Both the ADM242AR and ADM241LJRSZ are specified for operation from a single +5 V supply. The on-chip charge pump in each device generates the positive and negative RS-232 voltage levels required for the transmitters.

How many RS-232 drivers and receivers does each device provide?

The ADM242AR provides two RS-232 drivers and two RS-232 receivers. The ADM241LJRSZ also provides two drivers and two receivers, but adds shutdown and enable control functions that allow the transmitters and receivers to be disabled to reduce power consumption.

Does the ADM241LJRSZ support shutdown mode?

Yes. The ADM241LJRSZ includes active-low shutdown (SHDN) and enable control, allowing the driver and receiver sections to be powered down when not in use. The ADM242AR does not provide a shutdown control pin.

What data rate can these RS-232 transceivers support?

Both the ADM242AR and ADM241LJRSZ are specified for data rates up to 120 kbps, which is sufficient for standard RS-232 communication. Higher data rates require devices from the manufacturer's higher-speed families.

Can the ADM242AR be used as a drop-in replacement for the ADM241LJRSZ?

No. Because the packages, pinouts, and control features differ, the ADM242AR cannot be used as a drop-in replacement for the ADM241LJRSZ. Any substitution requires a PCB redesign and verification against the manufacturer's datasheets for both parts.

What are the operating temperature ranges for these devices?

The ADM242AR is specified over the industrial temperature range of -40 °C to +85 °C. The ADM241LJRSZ is specified over the commercial temperature range of 0 °C to +70 °C. Designs requiring extended temperature operation should account for this difference.