ADM489ARZ vs ADM4850AR

ADM489ARZとADM4850ARの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADM489ARZ and ADM4850AR are both half-duplex RS-485 transceivers in an 8-lead SOIC package with a 5 V supply and similar data rates, making the ADM4850AR a viable functional replacement candidate for the ADM489ARZ in many designs. However, the ADM489ARZ integrates a charge pump that supports a wider supply range and full-duplex-capable operation, while the ADM4850AR is a standard half-duplex device, so the designer must confirm the bus topology, supply tolerance, and external component requirements before substituting.

Package Type High match
Duplex Mode High match
Supply Voltage Range Validation required
Data Rate Validation required

Parts at a glance

Part A

ADM489ARZ

テキサス・インスツルメンツ

Lifecycle
Active
Stock
3659 個数
Package
SOIC-14
Series
インターフェース - ドライバ、レシーバ、トランシーバ
Part B

ADM4850AR

テキサス・インスツルメンツ

Lifecycle
Active
Stock
9264 個数
Package
SOIC-8
Series
インターフェース - ドライバ、レシーバ、トランシーバ

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADM489ARZ ADM4850AR Why it matters
Data Rate 250 kbps 250 kbps Maximum signaling speed; both support the same rate, so speed is not a differentiator for substitution.
Duplex Mode Full duplex Half duplex Full duplex allows simultaneous transmit and receive, while half duplex shares the bus; this fundamentally changes wiring and protocol compatibility.
Number of Drivers / Receivers 1 driver / 1 receiver 1 driver / 1 receiver Determines how many bus lines can be driven and monitored; identical here, so bus topology capability matches.
Supply Voltage 5 V 5 V Operating supply must match the system rail; both are 5 V devices, so power supply compatibility is preserved.
Receiver Input Impedance 1/4 unit load (up to 128 nodes) 1/4 unit load (up to 128 nodes) Higher input impedance allows more nodes on the bus; both support up to 128 transceivers, so network size capability is equal.
Fail-Safe Receiver Yes (open-circuit fail-safe) Yes (open-circuit fail-safe) Fail-safe receivers define a known output when the bus is idle or open, preventing spurious data; both provide this, so idle-bus behavior matches.
Package 16-lead SOIC 8-lead SOIC Package footprint and pin count affect PCB layout; the different pin counts mean the parts are not drop-in replacements.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Temperature range defines environmental robustness; identical ranges mean equivalent thermal suitability.
ESD Protection (Bus Pins) ±15 kV (HBM) ±15 kV (HBM) Bus-pin ESD tolerance affects field reliability; both rated at ±15 kV HBM, so protection level is equivalent.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADM489ARZ ADM4850AR
Supplier - Rochester Electronics, LLC
Part Status Active Obsolete
Type Transceiver Transceiver
Protocol RS422, RS485 RS422, RS485
Number of Drivers/Receivers 1/1 1/1
Voltage - Supply 4.5V ~ 5.5V 4.75V ~ 5.25V
Mounting Type Surface Mount Surface Mount
Duplex Full -
Receiver Hysteresis 70 mV -
Data Rate 250kbps -
Operating Temperature -40°C ~ 85°C -

Frequently asked questions

What are the primary differences between the ADM489ARZ and the ADM4850AR?

The ADM489ARZ is a 5 V, low-power, differential line transceiver compliant with RS-485 and RS-422, specified for data rates up to 250 kbps and supplied in an 8-lead SOIC package. The ADM4850AR is a 5 V, half-duplex RS-485/RS-422 transceiver with a higher specified data rate of up to 2.5 Mbps, also offered in an 8-lead SOIC package. The main distinctions are the maximum data rate, slew-rate characteristics, and the resulting suitability for different bus lengths and EMI profiles.

Are the ADM489ARZ and ADM4850AR pin-compatible?

Both devices are offered in an 8-lead SOIC (R-8) package with the standard RS-485 transceiver pinout (RO, RE, DE, DI, GND, A, B, VCC). Because they share this industry-standard pin assignment and package outline, they are pin-compatible at the package level; however, designers must still verify supply, data-rate, and termination requirements against the respective datasheets before substitution.

What is the maximum data rate of each device?

The ADM489ARZ is specified for data rates up to 250 kbps, making it suitable for low-speed, long-cable RS-485 networks. The ADM4850AR is specified for data rates up to 2.5 Mbps, allowing higher-throughput communication over shorter bus lengths. The achievable distance depends on cable characteristics, termination, and the slew rate of the driver.

Do both parts operate from a single 5 V supply?

Yes. Both the ADM489ARZ and the ADM4850AR are specified for operation from a single 5 V ±5% supply (4.75 V to 5.25 V), which is the standard supply for 5 V RS-485/RS-422 transceivers. Neither device is a 3.3 V part, so they should not be used in 3.3 V-only systems without level consideration.

How do the receiver input characteristics compare?

Both devices use a differential receiver with a wide common-mode input range suitable for RS-485/RS-422 buses, and both provide a fail-safe receiver output for the condition of a floating, shorted, or terminated-but-undriven bus. The ADM489ARZ receiver is specified for the 250 kbps data rate, while the ADM4850AR receiver supports the higher 2.5 Mbps rate; the input threshold and common-mode range should be confirmed from each datasheet for the target application.

Which part is better for long cable runs in noisy environments?

The ADM489ARZ, with its lower 250 kbps maximum data rate, has a reduced slew rate that limits high-frequency energy on the cable, which generally helps reduce EMI and reflections on long bus runs. The ADM4850AR, at up to 2.5 Mbps, has faster edges and is better suited to shorter, well-terminated buses where higher throughput is required. Selection should be based on the required data rate versus cable length and EMI constraints.

Are both devices compliant with RS-485 and RS-422 standards?

Yes. Both the ADM489ARZ and the ADM4850AR are designed as differential line transceivers compliant with the RS-485 and RS-422 standards, supporting multipoint bus configurations and differential data transmission. Designers should confirm the specific compliance statements and test conditions in the respective manufacturer datasheets for the target application.

Can the ADM4850AR directly replace the ADM489ARZ in an existing design?

A direct replacement is possible only after validating the differences. Because both are 5 V, 8-lead SOIC, half-duplex RS-485/RS-422 transceivers with the standard pinout, the ADM4850AR can often drop into an ADM489ARZ socket; however, the higher 2.5 Mbps data rate changes the slew rate and EMI profile, so bus termination, cable length, and the host UART timing must be re-verified against the ADM4850AR datasheet before substitution.