ADM489ARZ
テキサス・インスツルメンツ
- Lifecycle
- Active
- Stock
- 3659 個数
- Package
- SOIC-14
- Series
- インターフェース - ドライバ、レシーバ、トランシーバ
ADM489ARZとADM4856ARの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。
Replacement verdict
The ADM489ARZ and ADM4856AR are both half-duplex RS-485 transceivers in 8-pin SOIC packages with 5 V supply operation, making them functionally comparable for many bus-interface designs. However, they differ in driver slew-rate class and data rate, receiver input impedance, and quiescent supply current, so the ADM4856AR should be validated against the ADM489ARZ in the target network before being adopted as a direct substitute.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADM489ARZ | ADM4856AR | Why it matters |
|---|---|---|---|
| Data Rate | 250 kbps | 20 Mbps | Maximum signaling speed; the two parts differ by nearly two orders of magnitude, so they are not interchangeable in high-speed buses. |
| Duplex Mode | Full duplex | Half duplex | Full duplex allows simultaneous transmit and receive on separate pairs, while half duplex shares one pair; this changes the wiring and protocol topology. |
| Number of Drivers / Receivers | 1 driver / 1 receiver | 1 driver / 1 receiver | Transceiver channel count determines how many bus lines can be driven and monitored per package. |
| Supply Voltage | 5 V | 5 V | Operating supply rail must match the system power domain for proper logic and bus levels. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Industrial temperature range affects suitability for harsh environments and reliability margins. |
| Package / Mounting | 8-SOIC (surface mount) | 8-SOIC (surface mount) | Footprint and mounting style must match the PCB layout for a drop-in replacement. |
| Receiver Input Impedance | 1/4 unit load (≥48 kΩ) | 1/8 unit load (≥96 kΩ) | Unit-load rating determines how many nodes can share a bus; higher impedance allows more devices on the same network. |
| Fail-Safe Receiver | Yes (open-circuit fail-safe) | Yes (true fail-safe) | Fail-safe behavior guarantees a defined logic state when the bus is idle, open, or shorted, preventing spurious data. |
| ESD Protection (Bus Pins) | ±15 kV (HBM) | ±15 kV (HBM) | Bus-pin ESD rating indicates robustness against transient surges in field wiring. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADM489ARZ | ADM4856AR |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Type | Transceiver | Transceiver |
| Protocol | RS422, RS485 | RS422, RS485 |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Voltage - Supply | 4.5V ~ 5.5V | 4.75V ~ 5.25V |
| Mounting Type | Surface Mount | Surface Mount |
| Duplex | Full | - |
| Receiver Hysteresis | 70 mV | - |
| Data Rate | 250kbps | - |
| Operating Temperature | -40°C ~ 85°C | - |
The ADM489ARZ is a 5 V, low-power, differential line transceiver designed for RS-485/RS-422 communication, specified for data rates up to 250 kbps. The ADM4856AR is a 3.3 V, half-duplex, differential line transceiver intended for RS-485/RS-422 applications, specified for data rates up to 20 Mbps. The two devices differ in supply voltage, maximum data rate, and package/pinout.
No. The ADM489ARZ is supplied in an 8-lead SOIC package, while the ADM4856AR is supplied in an 8-lead SOIC package as well, but the pin functions and supply voltage requirements differ between the two devices. A direct drop-in replacement should not be assumed without verifying the pinout and supply rail against the respective manufacturer datasheets.
The ADM489ARZ operates from a single 5 V supply. The ADM4856AR operates from a single 3.3 V supply. The supply voltage difference is a key consideration when evaluating interchangeability in an existing design.
The ADM489ARZ is specified for data rates up to 250 kbps. The ADM4856AR is specified for data rates up to 20 Mbps. The ADM4856AR therefore supports significantly higher signaling rates than the ADM489ARZ.
Yes. Both the ADM489ARZ and the ADM4856AR are half-duplex differential transceivers intended for RS-485/RS-422 communication, with driver and receiver enable controls for bus sharing.
No. The ADM4856AR is specified for 3.3 V operation, so it should not be used in a 5 V system without confirming absolute maximum ratings and recommended operating conditions from the manufacturer datasheet. Substitution requires validating supply voltage, logic levels, data rate, and pinout against the target design.
Both the ADM489ARZ and the ADM4856AR are offered in 8-lead SOIC packages. Designers should confirm the exact package suffix and land pattern from the respective manufacturer datasheets before layout or replacement.