ADS1210U
STマイクロエレクトロニクス
- Lifecycle
- Active
- Stock
- 5384 個数
- Package
- SOIC-8
- Series
- データ取得 - アナログ/デジタルコンバータ (ADC)
ADS1210UとADS1201UG4の詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。
Replacement verdict
The ADS1210U and ADS1201UG4 are both 24-bit delta-sigma analog-to-digital converters, but they differ fundamentally in resolution architecture, output interface, package footprint, and reference configuration, so the ADS1201UG4 cannot serve as a direct drop-in substitute for the ADS1210U without circuit redesign and validation.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1210U | ADS1201UG4 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 24 | Both are 24-bit delta-sigma ADCs, so resolution alone does not distinguish them for substitutability. |
| Architecture | Delta-Sigma | Delta-Sigma | Matching architecture indicates similar noise-shaping behavior and signal-chain design requirements. |
| Number of Input Channels | 1 differential | 1 differential | Channel count and configuration must match the sensor or signal source topology in the target design. |
| Sampling Rate (max) | 10 kSPS | 1.5 kSPS | Maximum output data rate determines whether the part can meet the required update rate for the application. |
| Interface Type | SPI / Serial | SPI / Serial | A matching digital interface allows drop-in compatibility with the host microcontroller or DSP. |
| Supply Voltage (analog) | 5 V | 5 V | Analog supply compatibility ensures the part can share the existing power rail without level shifting. |
| Package / Mounting | SOIC-18 (SMD) | SOIC-16 (SMD) | Different package pin counts and footprints require PCB layout changes, affecting direct substitutability. |
| Operating Temperature Range | -40°C to +85°C | -40°C to +85°C | Matching temperature ratings confirm both parts suit the same environmental conditions. |
| Input Type | Differential | Differential | Differential inputs improve common-mode rejection; matching this preserves noise performance in the design. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1210U | ADS1201UG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Last Time Buy | Discontinued at Digi-Key |
| Type | - | Modulator |
| Number of Channels | - | 1 |
| Resolution(Bits) | - | 24 b |
| Sampling Rate(Per Second) | 16k | 1k |
| Data Interface | SPI | Serial |
| Voltage Supply Source | - | Analog and Digital |
| Voltage - Supply | - | 4.75V ~ 5.25V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | - | Surface Mount |
| Number of Bits | 24 | - |
| Number of Inputs | 1 | - |
| Input Type | Differential | - |
| Configuration | PGA-ADC | - |
| Number of A/D Converters | 1 | - |
| Architecture | Sigma-Delta | - |
| Reference Type | External, Internal | - |
| Voltage - Supply, Analog | 5V | - |
| Voltage - Supply, Digital | 5V | - |
| Features | PGA | - |
The ADS1210U is a 24-bit, 19kHz delta-sigma analog-to-digital converter with a programmable gain amplifier, while the ADS1201UG4 is a 24-bit, 1.5kHz delta-sigma modulator designed for isolated measurement applications. The ADS1210U integrates a full ADC signal chain with digital filter and SPI interface, whereas the ADS1201UG4 provides a single-bit modulator output stream requiring external digital filtering.
No. The ADS1210U is supplied in a 24-pin SOIC (wide-body) package, while the ADS1201UG4 is supplied in a 16-pin SOIC package. The pin counts and pin functions differ, so they are not footprint-compatible and cannot be interchanged on the same PCB land pattern.
The ADS1210U supports programmable output data rates up to 19kHz in its fastest mode. The ADS1201UG4 modulator operates with a clock input up to 10MHz and produces a 1-bit output stream; its effective conversion rate depends on the external digital filter and decimation ratio selected by the system designer.
The ADS1201UG4 is specifically intended for isolated measurement applications because its modulator output can be coupled through a digital isolator, keeping the analog front end galvanically isolated from the controller. The ADS1210U integrates the digital filter and serial interface on-chip, making it better suited for non-isolated precision measurement systems where a complete ADC-to-SPI solution is desired.
No. The ADS1210U includes an on-chip programmable gain amplifier with selectable gains, allowing direct connection of low-level sensors. The ADS1201UG4 does not include an integrated PGA; any signal conditioning or gain must be provided by external circuitry ahead of the modulator input.
The ADS1210U provides a serial peripheral interface (SPI-compatible) with a digital filter and decimation on-chip, outputting fully converted digital codes. The ADS1201UG4 outputs a single-bit oversampled modulator data stream that must be processed by an external digital filter or FPGA/DSP to obtain a multi-bit conversion result.
No. They differ in package, pin count, interface architecture, integrated signal-chain features, and intended application (complete ADC versus isolated modulator). A direct substitution is not possible; any design change requires validation against the respective manufacturer datasheets and the target system requirements.