ADS127L01IPBSR vs ADS124S08IPBS

ADS127L01IPBSRとADS124S08IPBSの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS124S08IPBS and ADS127L01IPBSR are both 24-bit delta-sigma ADCs in a TQFP-32 package, but they differ fundamentally in resolution architecture, sample rate, channel count, and interface configuration. The ADS124S08IPBS is a low-speed, high-resolution multiplexed sensor ADC with 8 single-ended or 4 differential inputs and integrated PGA, while the ADS127L01IPBSR is a wide-bandwidth single-channel ADC optimized for high-speed data acquisition. These differences in channel count, throughput, and digital interface make them unsuitable as direct substitutes in the same socket without significant redesign.

Different channel count Different sample rate Different digital interface Different input architecture

Parts at a glance

Part A

ADS127L01IPBSR

STマイクロエレクトロニクス

Lifecycle
Active
Stock
3034 個数
Package
TQFP-32
Series
データ取得 - アナログ/デジタルコンバータ (ADC)
Part B

ADS124S08IPBS

STマイクロエレクトロニクス

Lifecycle
Active
Stock
3448 個数
Package
TQFP-32
Series
データ取得 - アナログ/デジタルコンバータ (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS124S08IPBS ADS127L01IPBSR Why it matters
Resolution (bits) 24 24 Both are 24-bit delta-sigma ADCs, so nominal resolution is equivalent for precision measurement applications.
Number of input channels 12 (single-ended) / 6 (differential) 1 (differential) The ADS124S08 integrates a multiplexer for multi-sensor systems, while the ADS127L01 is a single-channel device, limiting direct substitutability in multi-channel designs.
Maximum sample rate 4 kSPS 512 kSPS The ADS127L01 supports much higher throughput, making it suitable for wide-bandwidth signals, whereas the ADS124S08 targets slower precision sensing.
Input type Differential / single-ended (multiplexed) Differential Single-ended capability on the ADS124S08 simplifies interfacing to ground-referenced sensors, which the ADS127L01 does not offer directly.
Programmable gain amplifier (PGA) Yes (gains 1 to 128) No An integrated PGA allows the ADS124S08 to directly digitize small sensor signals, while the ADS127L01 requires external amplification.
Supply voltage (analog) 2.7 V to 5.25 V (single supply) 2.7 V to 3.6 V (analog) The wider analog supply range of the ADS124S08 supports 5 V systems, whereas the ADS127L01 is limited to 3.6 V analog supply.
Interface SPI SPI Both use a standard SPI interface, easing digital-side integration and firmware reuse.
Package TQFP-32 TQFP-32 Identical package and pin count simplify PCB footprint considerations, though pinouts differ and must be verified.
Operating temperature range -40 °C to +125 °C -40 °C to +125 °C Both cover the industrial temperature range, so environmental robustness is comparable.
Typical application focus Multi-channel precision sensor measurement (RTD, thermocouple, bridge) High-speed wide-bandwidth precision data acquisition The devices target different signal-chain roles, so they are not drop-in substitutes despite shared 24-bit resolution.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS127L01IPBSR ADS124S08IPBS
Part Status Active Active
Number of Bits 24 24
Sampling Rate(Per Second) 512k 4k
Number of Inputs 1 12
Input Type Differential Single Ended
Data Interface SPI SPI
Configuration ADC MUX-PGA-ADC
Number of A/D Converters 1 1
Architecture Sigma-Delta Sigma-Delta
Reference Type External External, Internal
Voltage - Supply, Analog 2.7V ~ 3.6V 2.7V ~ 5.25V
Voltage - Supply, Digital 1.7V ~ 3.6V 2.7V ~ 3.6V
Operating Temperature -40°C ~ 125°C -50°C ~ 125°C
Ratio - S / H: ADC - 0:1
Features - PGA

Frequently asked questions

Are the ADS124S08IPBS and ADS127L01IPBSR pin-to-pin compatible?

No. Both devices are offered in a TQFP-32 (PBS) package, but they are not pin-to-pin compatible. The ADS124S08 is a 24-bit, 8-channel delta-sigma ADC with an integrated PGA and multiplexer, while the ADS127L01 is a 24-bit, single-channel wide-bandwidth delta-sigma ADC. Pin functions and the analog input architecture differ, so the PCB layout and external circuitry must be redesigned rather than directly swapped.

How do the input channel configurations of the ADS124S08IPBS and ADS127L01IPBSR differ?

The ADS124S08IPBS provides an 8-channel input multiplexer (4 differential or 8 single-ended inputs) with an integrated programmable gain amplifier, making it suited to multi-sensor scanning applications. The ADS127L01IPBSR is a single-channel device intended for high-speed, high-accuracy conversion of one signal, typically in wide-bandwidth data acquisition and vibration/audio measurement systems.

What are the maximum output data rates of the ADS124S08IPBS and ADS127L01IPBSR?

The ADS124S08IPBS supports data rates up to 4 kSPS in its high-resolution modes. The ADS127L01IPBSR supports significantly higher throughput, with selectable data rates up to 512 kSPS in wide-bandwidth mode. The ADS127L01 is therefore preferred when higher sampling bandwidth is required, while the ADS124S08 targets lower-speed, high-resolution multi-channel measurements.

Do both devices include an integrated programmable gain amplifier (PGA)?

No. The ADS124S08IPBS integrates a low-noise PGA with selectable gains, allowing direct connection of low-level sensors such as RTDs and thermocouples. The ADS127L01IPBSR does not include an integrated PGA; it is a single-channel ADC intended to be driven by an external amplifier or front-end signal conditioning stage.

What are the supply voltage requirements for the ADS124S08IPBS and ADS127L01IPBSR?

Both devices operate from an analog supply (AVDD) of 2.7 V to 5.25 V and a digital supply (DVDD) of 1.7 V to 3.6 V, consistent with their datasheet specifications. Designers should confirm the exact recommended operating conditions and decoupling requirements in the respective manufacturer datasheets before finalizing the power supply design.

Which device is better suited for multi-channel sensor measurement versus high-speed signal acquisition?

The ADS124S08IPBS is better suited to multi-channel sensor measurement because of its 8-channel multiplexer, integrated PGA, and low-speed high-resolution conversion, which are advantageous for RTD, thermocouple, and bridge sensor applications. The ADS127L01IPBSR is better suited to high-speed signal acquisition such as vibration analysis, audio, and wide-bandwidth data acquisition due to its single-channel architecture and data rates up to 512 kSPS.

Can the ADS127L01IPBSR directly replace the ADS124S08IPBS in an existing design?

No. Although both are 24-bit delta-sigma ADCs in a TQFP-32 package, they differ in channel count, PGA integration, maximum data rate, and pin functions. A direct replacement is not possible without redesigning the analog front end, updating the digital interface configuration, and revalidating the system against the ADS127L01 datasheet.