ADS1271IBPWR
STマイクロエレクトロニクス
- Lifecycle
- Active
- Stock
- 6728 個数
- Package
- TSSOP-16
- Series
- データ取得 - アナログ/デジタルコンバータ (ADC)
ADS1271IBPWRとADS1212Uの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。
Replacement verdict
The ADS1271IBPWR and ADS1212U are both 24-bit delta-sigma analog-to-digital converters, but they differ fundamentally in resolution architecture, sample rate, package footprint, and digital interface, so the ADS1212U cannot serve as a direct drop-in substitute for the ADS1271IBPWR without redesign and validation.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1271IBPWR | ADS1212U | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 22 | Higher resolution provides finer measurement granularity; a 24-bit ADC can resolve smaller signal changes than a 22-bit device. |
| Architecture | Delta-Sigma | Delta-Sigma | Both use delta-sigma conversion, but the specific modulator design affects noise shaping, latency, and achievable sample rates. |
| Max Sample Rate (SPS) | 105k | 6.25k | The maximum output data rate determines the bandwidth of signals the ADC can capture; the ADS1271 supports much faster sampling. |
| Number of Input Channels | 1 (differential) | 1 (differential) | Both are single-channel differential devices, so channel count is not a differentiator for substitutability. |
| Interface Type | SPI (serial) | SPI (serial) | Both use a serial SPI-compatible interface, simplifying drop-in replacement at the digital communication level. |
| Supply Voltage (analog) | 5 V | 5 V | Matching analog supply requirements allows reuse of the same power rail design. |
| Package | TSSOP-16 | SOIC-18 | Different package footprints require PCB layout changes, affecting direct board-level substitutability. |
| Operating Temperature Range | -40 to +105 °C | -40 to +85 °C | A wider temperature range supports use in harsher environments; the ADS1271 offers greater thermal headroom. |
| Input Type | Differential | Differential | Differential inputs improve common-mode noise rejection; both devices share this characteristic. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1271IBPWR | ADS1212U |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Part Status | Active | Active |
| Number of Bits | 24 | 22 |
| Sampling Rate(Per Second) | 105k | 6.25k |
| Number of Inputs | 1 | 1 |
| Input Type | Differential | Differential |
| Data Interface | SPI | SPI |
| Configuration | ADC | PGA-ADC |
| Number of A/D Converters | 1 | 1 |
| Architecture | Sigma-Delta | Sigma-Delta |
| Reference Type | External | External, Internal |
| Voltage - Supply, Analog | 5V | 5V |
| Voltage - Supply, Digital | 1.65V ~ 3.6V | 5V |
| Features | - | PGA |
| Operating Temperature | -40°C ~ 105°C | -40°C ~ 85°C |
The ADS1271IBPWR is a 24-bit, single-channel, delta-sigma analog-to-digital converter with a maximum data rate of 105 kSPS, housed in a TSSOP-16 package. The ADS1212U is a 22-bit, single-channel, delta-sigma ADC with a maximum data rate of 6.25 kSPS, housed in a SOIC-18 package. The ADS1271IBPWR offers higher resolution and significantly faster sampling, while the ADS1212U provides lower speed with a different package footprint.
No. The ADS1271IBPWR uses a 16-pin TSSOP package, while the ADS1212U uses an 18-pin SOIC package. The pin counts, pin functions, and package dimensions differ, so they are not pin-to-pin compatible and cannot be dropped into the same PCB land pattern without redesign.
The ADS1271IBPWR supports data rates up to 105 kSPS in high-speed mode. The ADS1212U supports a maximum data rate of 6.25 kSPS. The ADS1271IBPWR is therefore suitable for higher-bandwidth signal acquisition, while the ADS1212U targets lower-speed precision measurement applications.
The ADS1271IBPWR is a 24-bit delta-sigma ADC. The ADS1212U is a 22-bit delta-sigma ADC. The ADS1271IBPWR provides two additional bits of resolution compared with the ADS1212U, which can matter in high-dynamic-range measurement systems.
Yes. Both the ADS1271IBPWR and the ADS1212U provide a serial digital interface for communication with a host controller. The ADS1271IBPWR uses a SPI-compatible serial interface, and the ADS1212U also provides a serial interface for output data and configuration. Designers should consult the respective datasheets for exact timing and protocol details.
The ADS1271IBPWR operates with an analog supply (AVDD) of 5 V and a digital supply (DVDD) of 1.8 V to 3.3 V, with a separate reference input. The ADS1212U operates from a single 5 V supply with a reference input. Exact supply ranges and tolerances should be verified in the respective manufacturer datasheets before design.
The ADS1271IBPWR is better suited for high-speed data acquisition because its maximum data rate of 105 kSPS is significantly higher than the 6.25 kSPS maximum of the ADS1212U. The ADS1271IBPWR also offers 24-bit resolution, making it appropriate for wide-bandwidth precision measurement systems.
No. The two devices differ in package type and pin count (TSSOP-16 vs SOIC-18), resolution (24-bit vs 22-bit), maximum data rate (105 kSPS vs 6.25 kSPS), and supply architecture. A direct replacement is not possible without PCB redesign and firmware adjustment, and the performance differences must be validated against the target application requirements.