ADS1271IBPWR
STマイクロエレクトロニクス
- Lifecycle
- Active
- Stock
- 6728 個数
- Package
- TSSOP-16
- Series
- データ取得 - アナログ/デジタルコンバータ (ADC)
ADS1271IBPWRとADS1282HIPWの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。
Replacement verdict
The ADS1271IBPWR and ADS1282HIPW are both 24-bit delta-sigma ADCs in a TSSOP-28 package, but they differ fundamentally in resolution architecture, input configuration, and target application. The ADS1271IBPWR is a single-channel wide-bandwidth converter with a fixed data rate up to 105 kSPS, while the ADS1282HIPW is a dual-channel high-resolution seismic-grade converter with an integrated PGA and data rates up to 4 kSPS. These differences in channel count, programmable gain, and output data rate make the two devices non-interchangeable in existing designs without significant rework.
STマイクロエレクトロニクス
STマイクロエレクトロニクス
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1271IBPWR | ADS1282HIPW | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 31 | Higher resolution enables finer signal detail and lower quantization noise, which is critical for precision measurement and seismic/energy-exploration applications. |
| Maximum Sample Rate (SPS) | 105k | 4k | Sample rate determines the bandwidth of signals the ADC can capture; the ADS1271 suits wider-bandwidth data acquisition while the ADS1282 targets low-frequency high-precision sensing. |
| Architecture | Delta-Sigma | Delta-Sigma | Both use delta-sigma conversion, but their differing modulator designs yield very different noise/bandwidth tradeoffs relevant to substitutability. |
| Number of Input Channels | 1 (differential) | 2 (differential, multiplexed) | Channel count affects how many sensors can be interfaced; the ADS1282 supports two differential inputs while the ADS1271 is single-channel. |
| Supply Voltage (Analog) | 5 V | 5 V (analog), 3.3 V (digital) | Supply requirements determine power-rail compatibility and whether the part can drop into an existing board design without level shifting. |
| Interface Type | SPI (serial) | SPI (serial) | Both use SPI, but timing and register maps differ, so firmware and host-controller compatibility must be verified for substitution. |
| Package | TSSOP-16 (PW) | TSSOP-28 (PW) | Different package footprints and pin counts mean the parts are not drop-in replacements and require PCB layout changes. |
| Operating Temperature Range | -40°C to +105°C | -40°C to +85°C | Temperature range affects suitability for harsh environments; the ADS1271 offers a wider high-temperature margin. |
| Typical Power Consumption | ~70 mW | ~30 mW | Power consumption impacts thermal budget and battery life; the ADS1282 is lower power, favoring portable or energy-constrained designs. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1271IBPWR | ADS1282HIPW |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC,Texas Instruments |
| Part Status | Active | Active |
| Number of Bits | 24 | - |
| Sampling Rate(Per Second) | 105k | - |
| Number of Inputs | 1 | - |
| Input Type | Differential | - |
| Data Interface | SPI | - |
| Configuration | ADC | - |
| Number of A/D Converters | 1 | - |
| Architecture | Sigma-Delta | - |
| Reference Type | External | - |
| Voltage - Supply, Analog | 5V | - |
| Voltage - Supply, Digital | 1.65V ~ 3.6V | - |
| Operating Temperature | -40°C ~ 105°C | - |
The ADS1271IBPWR is a 24-bit, single-channel delta-sigma ADC with a maximum data rate of 105 kSPS, while the ADS1282HIPW is a 31-bit, single-channel delta-sigma ADC with a maximum data rate of 4 kSPS. The ADS1282HIPW integrates a programmable gain amplifier (PGA) and is designed for high-resolution seismic and energy exploration applications, whereas the ADS1271IBPWR is a wide-bandwidth industrial ADC without an integrated PGA.
No. The ADS1271IBPWR is supplied in a 20-pin TSSOP (PW) package, and the ADS1282HIPW is supplied in a 28-pin TSSOP (PW) package. The different pin counts and pin functions prevent direct PCB footprint interchangeability.
Both devices provide a serial peripheral interface (SPI)-compatible serial output, but the ADS1271IBPWR supports both SPI and frame-sync modes, while the ADS1282HIPW provides a flexible SPI-compatible interface with additional synchronization and calibration command support. The command set and register maps differ between the two devices.
The ADS1282HIPW provides 31-bit resolution and is specified for low-noise seismic-grade performance, making it better suited for high-resolution precision measurement. The ADS1271IBPWR provides 24-bit resolution and is intended for wide-bandwidth industrial signal acquisition.
No. The ADS1271IBPWR operates from a 5 V analog supply (AVDD), while the ADS1282HIPW operates from a 5 V analog supply as well but also requires a separate 3.3 V digital supply (DVDD) and supports a bipolar analog supply configuration. Designers must verify the supply scheme against each datasheet before substitution.
The ADS1271IBPWR is typically used in industrial measurement, vibration analysis, and wide-bandwidth data acquisition systems. The ADS1282HIPW is typically used in seismic data acquisition, energy exploration, and high-resolution precision instrumentation requiring an integrated PGA.
Both the ADS1271IBPWR and ADS1282HIPW are specified for the industrial temperature range of -40°C to +85°C, so temperature range alone does not differentiate them for substitution purposes.