ADS7843E vs ADS7841ES/2K5

ADS7843EとADS7841ES/2K5の詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS7843E and ADS7841ES/2K5 are not functionally interchangeable despite sharing a similar SAR ADC architecture and package family. The ADS7843E is a 4-wire resistive touch screen controller with an on-chip switch driver and pen-interrupt output, while the ADS7841ES/2K5 is a general-purpose 4-channel 12-bit ADC without touch screen control logic. Their interface behavior, channel configuration, and application role differ fundamentally, so substituting one for the other requires a full circuit redesign rather than a direct swap.

Different device function Different channel configuration Different control interface Different application role

Parts at a glance

Part A

ADS7843E

バーブラウン

Lifecycle
Active
Stock
6691 個数
Package
SSOP-16
Series
データ取得 - タッチスクリーンコントローラ
Part B

ADS7841ES/2K5

STマイクロエレクトロニクス

Lifecycle
Active
Stock
8265 個数
Package
SSOP-16
Series
データ取得 - アナログ/デジタルコンバータ (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7843E ADS7841ES/2K5 Why it matters
Resolution 12-bit 12-bit Both are 12-bit SAR ADCs, so resolution is equivalent for substitutability.
Number of Input Channels 4 (single-ended) / 2 (differential) 4 (single-ended) / 2 (differential) Channel count determines how many analog signals can be multiplexed into the ADC.
Interface Type SPI (serial) SPI (serial) Both use a serial SPI interface, allowing direct drop-in compatibility with the same host controller bus.
Supply Voltage Range 2.7 V to 5.25 V 2.7 V to 5.25 V Matching supply ranges ensure the parts can operate in the same system power domain.
Package / Pin Count 16-pin SSOP 16-pin SSOP Identical package and pin count enable board-level interchangeability without layout changes.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Equivalent temperature ratings confirm suitability for the same industrial environments.
Conversion Rate (max) 125 kSPS 200 kSPS A higher sampling rate in the ADS7841ES/2K5 allows faster signal acquisition, which may matter for higher-bandwidth applications.
Internal Reference No (external reference required) No (external reference required) Both require an external reference, so the same reference circuit can be reused.
Power Consumption (typical) Low power (approx. 0.5 mW at 2.7 V) Low power (approx. 0.9 mW at 5 V) Power draw affects battery life and thermal budget in portable and embedded designs.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7843E ADS7841ES/2K5
Supplier - Texas Instruments
Part Status Active Obsolete
Number of Bits - 12
Sampling Rate(Per Second) - 200k
Number of Inputs - 4
Input Type - Single Ended
Data Interface - SPI
Configuration - MUX-S/H-ADC
Ratio - S / H: ADC - 1:1
Number of A/D Converters - 1
Architecture - SAR
Reference Type - External
Voltage - Supply, Analog - 2.7V ~ 3.6V, 5V
Voltage - Supply, Digital - 2.7V ~ 3.6V, 5V
Operating Temperature -40°C ~ 85°C (TA) -40°C ~ 125°C
Touchscreen 3 Wire Capacitive -
Resolution(Bits) 12 b -
Interface Serial -
Voltage Reference External -
Voltage - Supply 2.7V ~ 5V -
Supply Current 280 µA -
Mounting Type Surface Mount -

Frequently asked questions

What are the primary functional differences between the ADS7843E and ADS7841ES/2K5?

The ADS7843E is a 4-wire resistive touchscreen controller with an integrated 12-bit ADC and on-chip drivers for touchscreen panel excitation. The ADS7841ES/2K5 is a standalone 12-bit, 4-channel successive-approximation ADC with a serial interface, without integrated touchscreen drive circuitry. The ADS7843E is designed specifically for touchscreen digitizer applications, while the ADS7841ES/2K5 is a general-purpose ADC.

Do the ADS7843E and ADS7841ES/2K5 have the same pinout and package?

No. The ADS7843E is offered in a 16-pin SSOP package, while the ADS7841ES/2K5 is offered in a 16-pin SSOP package as well, but the pin functions differ because the ADS7843E includes touchscreen drive outputs (X+, X-, Y+, Y-) and a pen-interrupt output, whereas the ADS7841ES/2K5 provides four analog input channels (CH0–CH3) without touchscreen drive pins. Pin-to-pin substitution is not possible without verifying the pin function assignments in the respective datasheets.

Can the ADS7843E be replaced by the ADS7841ES/2K5 in an existing touchscreen design?

No, not directly. The ADS7843E integrates the analog switches and drivers required to excite a 4-wire resistive touchscreen and includes a pen-interrupt output, while the ADS7841ES/2K5 lacks these touchscreen-specific functions. Replacing one with the other would require additional external circuitry and firmware changes, and the pin functions are not compatible.

What are the resolution and sampling specifications of each device?

Both devices provide 12-bit resolution. The ADS7843E supports a throughput rate of up to 125 kSPS. The ADS7841ES/2K5 supports a throughput rate of up to 200 kSPS. These figures should be confirmed against the specific manufacturer datasheet revision for the exact orderable part number.

What supply voltage ranges do the ADS7843E and ADS7841ES/2K5 support?

Both devices operate from a single supply in the range of 2.7 V to 5.25 V, according to their respective manufacturer datasheets. Designers should verify the exact recommended operating conditions for the specific grade and package variant being used.

What interface do these devices use to communicate with a host processor?

Both the ADS7843E and ADS7841ES/2K5 use a serial SPI-compatible interface for communication with a host microcontroller or processor. The ADS7843E additionally provides a pen-interrupt output to signal touch detection, which the ADS7841ES/2K5 does not provide.

Are the ADS7843E and ADS7841ES/2K5 suitable for the same applications?

No. The ADS7843E is intended for 4-wire resistive touchscreen digitizer applications, while the ADS7841ES/2K5 is a general-purpose 4-channel ADC suitable for data acquisition, industrial control, and sensor interface applications. Selection should be based on whether integrated touchscreen drive and pen-interrupt functions are required.