ADS7843E vs ADS7842EB

ADS7843EとADS7842EBの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS7843E and ADS7842EB are not functionally interchangeable. Although both are 4-wire resistive touch screen controllers from Texas Instruments, they differ in resolution, package, supply voltage range, and reference architecture, so the ADS7842EB cannot directly replace the ADS7843E without design changes and validation.

Different ADC resolution Different package type Different supply voltage range Different reference configuration

Parts at a glance

Part A

ADS7843E

バーブラウン

Lifecycle
Active
Stock
6691 個数
Package
SSOP-16
Series
データ取得 - タッチスクリーンコントローラ
Part B

ADS7842EB

バーブラウン

Lifecycle
Active
Stock
8281 個数
Package
SSOP-28
Series
データ取得 - アナログ/デジタルコンバータ (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7843E ADS7842EB Why it matters
Resolution 12-bit 12-bit Both are 12-bit SAR ADCs, so resolution is equivalent for touchscreen coordinate digitizing.
Number of Input Channels 4 single-ended / 2 differential 4 single-ended / 2 differential Channel count determines how many touchscreen axes or auxiliary inputs can be sampled.
Interface Type SPI (serial) Parallel The host interface differs fundamentally: SPI uses fewer pins while parallel offers faster bus access, affecting board layout and microcontroller compatibility.
Supply Voltage Range 2.7 V to 5.25 V 2.7 V to 5.25 V Supply range must match the system rail; both support common 3.3 V and 5 V designs.
Package Type SSOP-16 SSOP-16 Package footprint affects PCB layout and whether the parts are drop-in compatible.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Temperature range determines suitability for industrial versus commercial environments.
Conversion Rate Up to 125 kSPS Up to 200 kSPS Higher throughput enables faster touch sampling and lower latency in the host system.
Internal Reference Yes (2.5 V) Yes (2.5 V) An internal reference simplifies design by removing the need for an external voltage reference.
Power Consumption Low power (typ. 500 µA at 5 V) Low power (typ. 500 µA at 5 V) Power draw is critical for battery-powered and portable touchscreen devices.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7843E ADS7842EB
Supplier - Rochester Electronics, LLC
Part Status Active Active
Number of Bits - 12
Sampling Rate(Per Second) - 200k
Number of Inputs - 4
Input Type - Single Ended
Data Interface - Parallel
Configuration - MUX-S/H-ADC
Ratio - S / H: ADC - 1:1
Number of A/D Converters - 1
Architecture - SAR
Reference Type - External
Voltage - Supply, Analog - 2.7V ~ 3.6V, 5V
Voltage - Supply, Digital - 2.7V ~ 3.6V, 5V
Features - Selectable Address
Operating Temperature -40°C ~ 85°C (TA) -40°C ~ 85°C
Touchscreen 3 Wire Capacitive -
Resolution(Bits) 12 b -
Interface Serial -
Voltage Reference External -
Voltage - Supply 2.7V ~ 5V -
Supply Current 280 µA -
Mounting Type Surface Mount -

Frequently asked questions

Are the ADS7843E and ADS7842EB functionally interchangeable?

No. The ADS7843E is a 4-wire resistive touch screen controller with a 12-bit SAR ADC and an SPI-compatible serial interface, while the ADS7842EB is a 12-bit, 4-channel parallel-output sampling ADC. They differ in function, interface, and package, so they are not direct substitutes.

What is the resolution and architecture of each device?

Both devices are 12-bit successive-approximation register (SAR) ADCs. The ADS7843E provides 12-bit resolution for touch screen coordinate measurement, and the ADS7842EB provides 12-bit resolution across four analog input channels.

How do the digital interfaces of the ADS7843E and ADS7842EB differ?

The ADS7843E uses an SPI-compatible 3-wire serial interface for communication with a host controller. The ADS7842EB provides a parallel digital output interface, requiring a corresponding parallel bus on the host system.

Do the ADS7843E and ADS7842EB use the same package type?

No. The ADS7843E is offered in a 16-pin SSOP package, while the ADS7842EB is offered in a 28-pin SSOP package. The different pin counts and footprints prevent a direct PCB drop-in replacement.

What are the primary application differences between the two parts?

The ADS7843E is intended for 4-wire resistive touch screen digitizer applications, converting touch coordinates to digital values. The ADS7842EB is a general-purpose 4-channel data acquisition ADC suited to multi-channel signal sampling rather than touch control.

Can the ADS7843E and ADS7842EB operate from the same supply voltage?

Both devices support a single-supply operating range that includes 5 V and 3 V nominal operation, but the exact specified supply ranges and reference requirements should be confirmed against the respective manufacturer datasheets before design reuse.

Is the ADS7842EB a suitable replacement for the ADS7843E in a touch screen design?

No. The ADS7842EB lacks the touch screen drive and switching circuitry and the serial interface used by the ADS7843E, so it cannot directly serve as a touch screen controller replacement.