STD10P6F6

画像は参考用です

STD10P6F6

+BOM

MOSFET P CH 60V 10A DPAK

365 日間品質保証

7*24 日間の品質保証

90-時間単位のサービス保証

1日間のアフターサービス保証

仕様

属性 値
Package Tape & Reel (TR),Cut Tape (CT)
Series DeepGATE™, STripFET™ VI
ProductStatus Active
FETType P-Channel
Technology MOSFET (Metal Oxide)
DraintoSourceVoltage(Vdss) 60 V
Current-ContinuousDrain(Id)@25°C 10A (Tc)
DriveVoltage(MaxRdsOnMinRdsOn) 10V
RdsOn(Max)@IdVgs 160mOhm @ 5A, 10V
Vgs(th)(Max)@Id 4V @ 250µA
GateCharge(Qg)(Max)@Vgs 6.4 nC @ 10 V
Vgs(Max) ±20V
InputCapacitance(Ciss)(Max)@Vds 340 pF @ 48 V
PowerDissipation(Max) 35W (Tc)
OperatingTemperature 175°C (TJ)
MountingType Surface Mount
SupplierDevicePackage DPAK

概要

Equivalent

Equivalent products to the STD10P6F6 (STMicroelectronics) include:
- STP10PF06 (STMicroelectronics)
- IRFZ44N (Infineon)
- FQP10P06 (ON Semiconductor)
- IRLZ44N (Infineon, logic-level gate)
These are N-channel MOSFETs with similar voltage (60V) and current (10A) ratings. Verify specs (e.g., gate threshold, RDS(on)) for exact compatibility.

Features

The STD10P6F6 is a P-channel MOSFET with the following key features:
- Voltage Rating: -60V (Drain-Source, VDSS)
- Current Rating: -10A (Continuous Drain Current, ID)
- Low On-Resistance: 60mΩ (RDS(on) at VGS = -10V)
- Fast Switching: Low gate charge (Qg) for efficient performance
- Logic-Level Gate Drive: Compatible with 5V/10V drive (VGS(th) ~ -2V)
- Package: TO-252 (DPAK), surface-mount design
- Applications: Power management, DC-DC converters, motor control, and load switching
It offers robust performance in compact designs with good thermal efficiency.

Pinout

The STD10P6F6 is a P-channel MOSFET in a TO-252 (DPAK) package with 3 pins:
1. Gate (G) – Controls the switching operation.
2. Drain (D) – Connects to the load (high-side switch).
3. Source (S) – Connected to the supply voltage.
Key Features:
- Voltage Rating: -60V (Drain-Source).
- Current Rating: -10A (continuous drain current).
- Low On-Resistance (RDS(on)): ~0.06Ω (typical).
- Logic-Level Gate Drive (suitable for 5V/10V control).
Commonly used in power switching, DC-DC converters, and motor control.

Manufacturer

The STD10P6F6 is a power MOSFET manufactured by STMicroelectronics, a multinational semiconductor company based in Switzerland. STMicroelectronics specializes in designing and producing a wide range of semiconductor solutions, including microcontrollers, sensors, power devices, and analog ICs, serving industries like automotive, industrial, and consumer electronics. The company is known for its innovation and high-performance electronic components.
The STD10P6F6 is a P-channel MOSFET designed for power management applications, offering low on-resistance and high efficiency.

Application

The STD10P6F6 is a power MOSFET designed for high-efficiency switching applications. Key application areas include:
1. Power Supplies – Used in AC-DC and DC-DC converters for SMPS (Switched-Mode Power Supplies).
2. Motor Control – Drives motors in automotive, industrial, and consumer electronics.
3. LED Lighting – Enables efficient power management in LED drivers.
4. Battery Management – Supports charging/discharging circuits in portable devices and EVs.
5. DC-DC Converters – Enhances performance in buck, boost, and buck-boost topologies.
Its low on-resistance and fast switching make it ideal for energy-efficient, high-frequency applications.

Package

The STD10P6F6 is a P-channel MOSFET typically available in a TO-252 (DPAK) surface-mount package. This package is compact, suitable for high-power applications, and features a thermal pad for efficient heat dissipation. It is commonly used in power management circuits. For exact specifications, always refer to the manufacturer's datasheet.

STD10P6F6に関連する製品

  • 迅速な見積もり

  • 見積もり依頼を送信 STD10P6F6 このフォームをご利用ください。12時間以内にご返信いたします。