ADM242AR vs ADM242ARZ

ADM242ARとADM242ARZの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADM242ARZ and ADM242AR are functionally equivalent RS-232 transceiver ICs from the same manufacturer family, sharing identical core electrical characteristics, package type, and pin configuration. The primary distinction lies in the lead-free (RoHS-compliant) finish of the ADM242ARZ versus the leaded finish of the ADM242AR, making the ARZ variant the preferred choice for current production while remaining a direct functional substitute for the AR in existing designs.

Function and Interface Type High match
Package Type and Pinout High match
Supply Voltage and Current Rating High match
RoHS and Lead Finish Validation required

Parts at a glance

Part A

ADM242AR

テキサス・インスツルメンツ

Lifecycle
Active
Stock
6746 個数
Package
SOIC-18
Series
インターフェース - ドライバ、レシーバ、トランシーバ
Part B

ADM242ARZ

テキサス・インスツルメンツ

Lifecycle
Active
Stock
7245 個数
Package
SOIC-18
Series
インターフェース - ドライバ、レシーバ、トランシーバ

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADM242ARZ ADM242AR Why it matters
Manufacturer Analog Devices Inc. Analog Devices Inc. Same manufacturer ensures consistent design, documentation, and quality standards.
Function Dual RS-232 line driver/receiver with internal charge pump Dual RS-232 line driver/receiver with internal charge pump Identical core function confirms the parts are functionally interchangeable in RS-232 interface designs.
Number of Drivers/Receivers 2 drivers / 2 receivers 2 drivers / 2 receivers Matching channel counts ensure the same number of serial lines can be supported.
Supply Voltage 5 V (single supply) 5 V (single supply) Same supply requirement allows drop-in use in existing 5 V systems.
Data Rate 200 kbps 200 kbps Identical maximum data rate supports the same communication throughput requirements.
Package / Mounting 20-SOIC (surface mount) 20-SOIC (surface mount) Same package and footprint allow direct PCB replacement without layout changes.
RoHS Compliance RoHS compliant (lead-free) Non-RoHS (contains lead) RoHS status affects regulatory compliance and solder process compatibility; the Z suffix denotes the lead-free variant.
Part Number Suffix Meaning Z = RoHS-compliant, lead-free No Z = standard leaded finish The suffix distinguishes environmental compliance and termination finish, which matters for procurement and assembly.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Same temperature range ensures equivalent performance across the same environmental conditions.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADM242AR ADM242ARZ
Part Status Obsolete Active
Type Transceiver Transceiver
Protocol RS232 RS232
Number of Drivers/Receivers 2/2 2/2
Duplex Full Full
Receiver Hysteresis 400 mV 400 mV
Data Rate 200kbps 200kbps
Voltage - Supply 4.5V ~ 5.5V 4.5V ~ 5.5V
Operating Temperature -40°C ~ 85°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What is the difference between ADM242ARZ and ADM242AR?

The ADM242ARZ and ADM242AR are functionally identical dual RS-232 line drivers/receivers from Analog Devices. The suffix difference is the packaging/ordering designation: the "Z" suffix denotes RoHS-compliant lead-free construction (per Analog Devices ordering guide), while the non-Z ADM242AR is the older non-RoHS leaded version. Electrical specifications are the same for both.

Are ADM242ARZ and ADM242AR electrically and functionally interchangeable?

Yes. Both devices are the same ADM242 dual RS-232 transceiver in a 24-lead SOIC (R-24) package with identical pinout and electrical characteristics. The only documented difference is the RoHS/lead-free status indicated by the Z suffix, so they are interchangeable in function; the Z version is preferred for current RoHS-compliant designs.

What are the key technical specifications of the ADM242?

The ADM242 is a dual RS-232 driver/receiver operating from a single +5 V supply, with on-chip charge pump converters generating the RS-232 voltage levels. It provides two drivers and two receivers, supports data rates up to 200 kbps, and is offered in a 24-lead SOIC package. Designers should confirm exact limits against the Analog Devices ADM242 datasheet.

Does the ADM242 include internal charge pump capacitors?

The ADM242 uses on-chip charge pump circuitry to generate RS-232-compatible output levels from a single +5 V supply, and it requires external charge pump capacitors as specified in the datasheet application information. The exact capacitor values and connections should be taken from the Analog Devices ADM242 datasheet.

What supply voltage does the ADM242 require?

The ADM242 operates from a single +5 V supply. The internal charge pumps derive the positive and negative RS-232 output voltages from this supply, so no separate ±12 V rails are required. Verify the specified supply tolerance in the Analog Devices ADM242 datasheet.

In which package are ADM242ARZ and ADM242AR supplied?

Both the ADM242ARZ and ADM242AR are supplied in the 24-lead SOIC package (Analog Devices package code R-24). The "R" in the part number denotes this SOIC package, and the pinout is identical between the two ordering variants.

Which variant should be selected for a new RoHS-compliant design?

The ADM242ARZ should be selected for new designs requiring RoHS compliance, since the Z suffix designates the lead-free/RoHS-compliant version per Analog Devices ordering conventions. The ADM242AR is the non-RoHS legacy variant and may not be suitable where RoHS compliance is mandated.

Can ADM242ARZ directly replace ADM242AR on an existing PCB?

Yes, from a footprint and pinout standpoint, since both are the same 24-lead SOIC device with identical pin functions. The replacement is a drop-in fit; the only consideration is that the Z version is RoHS-compliant lead-free, which may require reflow profile adjustment to the lead-free soldering conditions specified by Analog Devices.