ADM3054BRWZ
テキサス・インスツルメンツ
- Lifecycle
- Active
- Stock
- 5622 個数
- Package
- SOIC-16
- Series
- インターフェース - ドライバ、レシーバ、トランシーバ
ADM3054BRWZとADM3076EARZの詳細な比較では、それぞれの仕様と主要機能に関する貴重な洞察を提供します。RoHS指令への準拠、REACH規則、シリーズ、実装スタイル、パッケージタイプ、その他の関連特性など、重要な要素を詳細に網羅しています。違いを並べて表示することで、部品選定が容易になり、特定のアプリケーションに最適なオプションを選択しやすくなります。
Replacement verdict
The ADM3076EARZ and ADM3054BRWZ are not drop-in replacements for one another. The ADM3076EARZ is a 3.3 V RS-485/RS-422 transceiver in an 8-lead SOIC package, while the ADM3054BRWZ is a 5 kV rms isolated CAN transceiver in a 16-lead SOIC wide-body package. They differ in bus protocol, isolation, supply voltage, and package footprint, so substituting one for the other requires a full redesign rather than a direct swap.
テキサス・インスツルメンツ
テキサス・インスツルメンツ
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADM3076EARZ | ADM3054BRWZ | Why it matters |
|---|---|---|---|
| Function / Protocol | RS-485/RS-422 transceiver | Isolated CAN transceiver | These devices serve entirely different bus protocols (RS-485 vs CAN), so they are not functionally interchangeable in a given network. |
| Isolation | Non-isolated | Galvanically isolated (5 kV rms) | Isolation protects against ground loops and high common-mode voltages; the isolated part is required in safety or noisy environments. |
| Data Rate | 16 Mbps | 1 Mbps | Maximum signaling speed determines whether the part meets the timing budget of the bus; the RS-485 part is much faster. |
| Supply Voltage | 3.3 V | 5 V (VCC) with 3.3 V/5 V logic supply (VIO) | Supply requirements dictate power-rail design and logic-level compatibility with the host controller. |
| Duplex / Channel Configuration | Full duplex | Half duplex (single CAN channel) | Duplex configuration affects wiring topology and whether simultaneous transmit/receive is possible. |
| Number of Drivers/Receivers | 1 driver, 1 receiver | 1 driver, 1 receiver (CAN) | Channel count defines how many bus lines can be driven and monitored by a single device. |
| Package | 8-lead SOIC (R-8) | 16-lead SOIC (RW-16) | Footprint and pin count must match the PCB layout; these packages are not drop-in compatible. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +105 °C | Temperature range determines suitability for industrial or automotive environments with wide thermal excursions. |
| Fail-Safe Receiver | Yes (open/short fail-safe) | Not applicable (CAN dominant/recessive) | Fail-safe behavior ensures a defined logic state on an idle or faulted bus, preventing spurious data. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADM3054BRWZ | ADM3076EARZ |
|---|---|---|
| Series | iCoupler® | - |
| Part Status | Active | Active |
| Type | Transceiver, Isolated | Transceiver |
| Protocol | CAN | RS422, RS485 |
| Number of Drivers/Receivers | 1/1 | 1/1 |
| Data Rate | 1Mbps | 16Mbps |
| Voltage - Supply | 0.5V ~ 6V | 3V ~ 3.6V |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
| Duplex | - | Full |
| Receiver Hysteresis | - | 100 mV |
The ADM3076EARZ is a 3.3 V, ±15 kV ESD-protected, half-duplex RS-485/RS-422 transceiver specified for data rates up to 500 kbps. The ADM3054BRWZ is a 5 kV rms signal-isolated CAN transceiver compliant with ISO 11803-2, operating from a single 5 V supply on the logic side and a 4.5 V to 5.5 V isolated supply on the bus side. They serve different bus protocols (RS-485 vs. CAN) and are not functionally interchangeable.
No. The ADM3076EARZ is offered in an 8-lead SOIC package with a standard RS-485 transceiver pinout (RO, RE, DE, DI, GND, A, B, VCC). The ADM3054BRWZ is offered in a 16-lead SOIC wide-body package with a CAN transceiver pinout including TXD, RXD, VCC, VIO, GND1, GND2, CANH, CANL, and isolation-related pins. Package size, pin count, and pin functions differ, so they are not drop-in replacements.
No. The ADM3076EARZ supports RS-485/RS-422 multidrop buses, typically up to 256 nodes depending on loading, using differential A/B lines. The ADM3054BRWZ supports CAN (ISO 11803-2) buses using differential CANH/CANL lines with arbitration-based multi-master operation. The protocols, framing, and physical layer requirements are different, so they cannot share the same network.
The ADM3076EARZ operates from a single 3.3 V supply and provides no galvanic isolation. The ADM3054BRWZ requires a 5 V logic-side supply (VCC) and a 4.5 V to 5.5 V isolated bus-side supply, and provides 5 kV rms signal isolation between the logic and bus sides. Designs requiring isolation must use the ADM3054BRWZ or an equivalent isolated transceiver, not the ADM3076EARZ.
The ADM3076EARZ is specified with ±15 kV ESD protection on the RS-485 bus pins (human body model) per the Analog Devices datasheet. The ADM3054BRWZ datasheet specifies ESD protection on the CAN bus pins, but the exact rating should be confirmed from the current Analog Devices datasheet before design sign-off. The two parts are specified under different bus interface standards, so ESD ratings are not directly comparable.
No. The ADM3076EARZ is an RS-485/RS-422 transceiver and does not implement CAN protocol signaling, differential drive characteristics, or arbitration support required by ISO 11803-2. Substituting it into a CAN network would not provide compliant CAN communication and would also remove the galvanic isolation provided by the ADM3054BRWZ.
The ADM3076EARZ is specified for data rates up to 500 kbps, which supports longer RS-485 cable runs consistent with the RS-485 standard's rate-versus-length tradeoff. The ADM3054BRWZ supports CAN data rates up to 1 Mbps per the ISO 11803-2 standard, with bus length limited accordingly. Actual achievable distance depends on cable characteristics, termination, stub length, and node count, and should be validated against the respective datasheets and standard guidelines.
For an isolated CAN interface, the ADM3054BRWZ is the appropriate choice because it integrates 5 kV rms signal isolation and a CAN transceiver in a single package. For a non-isolated RS-485/RS-422 interface, the ADM3076EARZ is appropriate. Selection should be based on the required bus protocol, isolation requirement, supply rails, and package footprint, verified against the current Analog Devices datasheets.